This series defines the i.MX6 internal video multiplexers and MIPI CSI-2
receiver device nodes, and their connections to eachother and the i.MX6
IPU CSI ports.
It also implements video capture support on the SabreLite, SabreSD, and
SabreAuto reference platforms, by defining the video sensor nodes on those
platforms, and their connections to the video muxes and MIPI CSI-2 receiver.
There should not be much of anything controversial in this series. The
imx-media driver is set to be merged in time for 4.13, so please accept
this series soon.
Philipp Zabel (2):
ARM: dts: imx6qdl: add multiplexer controls
ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their
connections
Steve Longerbeam (9):
ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
ARM: dts: imx6qdl: add capture-subsystem device
ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround
ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors
ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
ARM: dts: imx6-sabreauto: create i2cmux for i2c3
ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture
ARM: dts: imx6-sabreauto: add the ADV7180 video decoder
arch/arm/boot/dts/imx6dl-sabrelite.dts | 5 +
arch/arm/boot/dts/imx6dl-sabresd.dts | 5 +
arch/arm/boot/dts/imx6dl.dtsi | 189 +++++++++++++++++++++++++++++++
arch/arm/boot/dts/imx6q-sabrelite.dts | 5 +
arch/arm/boot/dts/imx6q-sabresd.dts | 5 +
arch/arm/boot/dts/imx6q.dtsi | 125 ++++++++++++++++++++
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 131 +++++++++++++++++----
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi | 152 ++++++++++++++++++++++++-
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 114 ++++++++++++++++++-
arch/arm/boot/dts/imx6qdl.dtsi | 20 +++-
10 files changed, 724 insertions(+), 27 deletions(-)
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
