On Mon, Jun 12, 2017 at 11:23:53AM -0700, Steve Longerbeam wrote: > This series defines the i.MX6 internal video multiplexers and MIPI CSI-2 > receiver device nodes, and their connections to eachother and the i.MX6 > IPU CSI ports. > > It also implements video capture support on the SabreLite, SabreSD, and > SabreAuto reference platforms, by defining the video sensor nodes on those > platforms, and their connections to the video muxes and MIPI CSI-2 receiver. > > There should not be much of anything controversial in this series. The > imx-media driver is set to be merged in time for 4.13, so please accept > this series soon. > > > Philipp Zabel (2): > ARM: dts: imx6qdl: add multiplexer controls > ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their > connections > > Steve Longerbeam (9): > ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node > ARM: dts: imx6qdl: add capture-subsystem device > ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround > ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors > ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors > ARM: dts: imx6-sabreauto: create i2cmux for i2c3 > ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b > ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture > ARM: dts: imx6-sabreauto: add the ADV7180 video decoder Applied all, thanks. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
