Hi, This third version would allow to apply the series without any conflict: - This time the series is rebased on gpio/for-next to avoid conflict with already applied patches. - The documentation part has been removed from this series and I will asked to Rob Herring to apply through the device tree subsystem. Thanks to this there is no external dependencies except the dts part that have to be merged through the mvebu tree. The first patch is a fix that was already posted. Then the first part of the series is adding the support for the pin controllers found on the Marvell Armada 7K/8K. These controllers are compatible with the ones found on the ARM32 mvebu SoCs. However, the pinctrl node in the device tree of theses SoCs are child of a syscon. So for them we will reuse the regmap support introduced by Russell King. Each component of the Armada 7K and 8K comes with their own pin controller, that's why we have 2 new drivers: one for the CP110 and one for the AP806. The second part of the series extends the mvebu gpio driver to support the gpio controllers found on the Marvell Armada 7K/8K SoCs. The gpio controllers used on the Marvell Armada 7K/8K SoCs are the same that the ones used on the ARM32 mvebu SoCs. However, the pinctrl node in the device tree of theses SoCs are child of a syscon. Thanks, Gregory Changelog: v2 -> v3 - Rebased on gpio/for-next. - Added the fix "gpio: mvebu: fix regmap_update_bits usage" with the tested-by and reviewed-by flag - Removed the binding documentation patch that will be applied through an other path. v1 -> v2: - Merged of the pinctrl and gpio series. - Rebased on next-20170531 (which contains gpio and pinctrl commit already applied). - Removed already applied patches. - Remove the modular support of the drivers, suggested by Paul Gortmaker. - Added tested-by from Thomas Petazzoni. - Added acked-by from Rob Herring. Gregory CLEMENT (6): gpio: mvebu: fix regmap_update_bits usage pinctrl: mvebu: remove the offset property for regmap arm64: marvell: enable the Armada 7K/8K pinctrl driver arm64: dts: marvell: add pinctrl support for Armada 7K/8K gpio: mvebu: Add support for the Armada 7K/8K SoCs arm64: dts: marvell: add gpio support for Armada 7K/8K Hanna Hawa (2): pinctrl: mvebu: add driver for Armada AP806 pinctrl pinctrl: mvebu: add driver for Armada CP110 pinctrl Russell King (1): pinctrl: avoid PLAT_ORION dependency arch/arm64/Kconfig.platforms | 2 +- arch/arm64/boot/dts/marvell/armada-7020.dtsi | 2 +- arch/arm64/boot/dts/marvell/armada-7040.dtsi | 2 +- arch/arm64/boot/dts/marvell/armada-70x0.dtsi | 68 +- arch/arm64/boot/dts/marvell/armada-8020.dtsi | 3 +- arch/arm64/boot/dts/marvell/armada-8040.dtsi | 3 +- arch/arm64/boot/dts/marvell/armada-80x0.dtsi | 76 +- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 14 +- arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 21 +- arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 22 +- drivers/gpio/gpio-mvebu.c | 216 ++-- drivers/pinctrl/mvebu/Kconfig | 12 +- drivers/pinctrl/mvebu/Makefile | 2 +- drivers/pinctrl/mvebu/pinctrl-armada-ap806.c | 140 ++- drivers/pinctrl/mvebu/pinctrl-armada-cp110.c | 687 ++++++++++++- drivers/pinctrl/mvebu/pinctrl-mvebu.c | 6 +- drivers/pinctrl/mvebu/pinctrl-mvebu.h | 2 +- 17 files changed, 1189 insertions(+), 89 deletions(-) create mode 100644 arch/arm64/boot/dts/marvell/armada-70x0.dtsi create mode 100644 arch/arm64/boot/dts/marvell/armada-80x0.dtsi create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-ap806.c create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-cp110.c base-commit: 77fd50d14eb4a48d00cee84a7beae174f8011157 -- git-series 0.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
