Hi All,
Any further suggestions, should i just ignore the error "Failed to load ceph-mgr modules: telemetry" or is this my route cause for no realtime I/O readings in the Dashboard?
Thanks
On Fri, Feb 8, 2019 at 3:59 PM Ashley Merrick <singapore@xxxxxxxxxxxxxx> wrote:
Message went away, but obviously still don't get the stats showing in the dashboard (I am guessing this isn't a known bug currently?) and that they should be working.Everything work's fine apart from the dashboard does not show the live I/O stats.Nothing is mentioned in mgr lags at the default log level, just the message that showed under Cluster Logs.,AshleyOn Fri, Feb 8, 2019 at 3:57 PM Wido den Hollander <wido@xxxxxxxx> wrote:
On 2/8/19 8:13 AM, Ashley Merrick wrote:
> I have had issues on a mimic cluster (latest release) where the
> dashboard does not display any read or write ops under the pool's
> section on the main dashboard page.
>
> I have just noticed during restarting the mgr service the following
> shows under "Cluster Logs", nothing else just the following : "Failed to
> load ceph-mgr modules: telemetry"
>
> Would this be causing the issue, if so is there anything I can do to
> find the issue?
>
Like you already did, the Mgr logs. Did the message go away or did you
need to disable the module?
Wido
> I have looked through the mgr log's but nothing that matches the time
> stamp shown in the Cluster Logs under the dashboard home page.
>
> _______________________________________________
> ceph-users mailing list
> ceph-users@xxxxxxxxxxxxxx
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
