I used bobtail (0.56) and repeated the steps, and mkcephfs ran fine. Thanks. However, the very next command ( sudo service ceph -a start ) returns the following: ceph: unrecognized service. Any way to resolve this?
Thanks again,
Varun
--
Varun Chandramouli
Birla Institute of Technology & Science
http://in.linkedin.com/in/chandramoulivarun
On Thu, Feb 21, 2013 at 4:12 AM, Noah Watkins <jayhawk@xxxxxxxxxxx> wrote:
Varun,
It isn't clear from the log where exactly the problem is cropping up. Would you mind trying to use the stable Bobtail release?
- Noah
On Feb 20, 2013, at 5:54 AM, Varun Chandramouli <varun.c37@xxxxxxxxx> wrote:
> Hi All,
>
> I still am unable to remove the error which I have been getting. I tried re-building ceph, but the same error persists. Someone please help me out.
>
> Thanks a lot
> Varun
>
> On Mon, Feb 18, 2013 at 11:05 PM, Varun Chandramouli <varun.c37@xxxxxxxxx> wrote:
> Noah,
>
> Thanks, turns out I had indeed changed the wrong file. Anyways, now I have changed the correct file. Since the output was too big to be captured and pasted here, I am attaching the file. Hope its ok.
>
> Varun
>
>
> On Mon, Feb 18, 2013 at 10:49 PM, Noah Watkins <jayhawk@xxxxxxxxxxx> wrote:
>
> On Feb 18, 2013, at 9:06 AM, Varun Chandramouli <varun.c37@xxxxxxxxx> wrote:
>
> > Hi Noah,
> >
> > I made the change (added -x to !/bin/sh -x and uncommented it) to the mkcephfs file available in the source code, /home/varunc/ceph/src/mkcephfs in my case), and the output was what I pasted. find / -name mkcephfs did not return any other location for the file, so I guess there is only one mkcephfs script on my machine. Is there some other file I should be modifying?
>
> To make sure you are editing the correct file, run
>
> #> which mkcephfs
>
> which will print the full path to the script being run.
>
> The first few lines of the top of the script should look like (with the #):
>
> #!/bin/sh -x
> #
> # mkcephfs
> #
> # This tool is designed to be flexible. There are two ways to go:
>
> If for some reason it is still not working, you can add an echo statement to confirm:
>
> #!/bin/sh
>
> set -x
> echo "I should be seeing this"
>
> #
> # mkcephfs
> #
> # This tool is designed to be flexible. There are two ways to go:
>
> -Noah
>
> >
> > Varun
> >
> > On Mon, Feb 18, 2013 at 9:24 PM, Noah Watkins <jayhawk@xxxxxxxxxxx> wrote:
> > Varun,
> >
> > Are you sure the "-x" made it into the installed mkcephfs script that you are running? The output should be very large and verbose. Here are the first few lines of output--each command should be echoed to the terminal:
> >
> > nwatkins@kyoto:~/projects/ceph/ceph/src$ ./mkcephfs -a -c ceph.conf
> > + set -e
> > + dirname ./mkcephfs
> > + [ . = . ]
> > + [ /home/nwatkins/projects/ceph/ceph/src != /etc/init.d ]
> > + BINDIR=.
> >
> > .. and on and on and on and on and on
> >
> > On Feb 18, 2013, at 2:58 AM, Varun Chandramouli <varun.c37@xxxxxxxxx> wrote:
> >
> > > Hi Sam,
> > >
> > > I tried doing what you said. I added -x to 1st line of mkcephfs, and ran the command again. It again gave the same error:
> > >
> > > root@varunc5-virtual-machine:/usr/local/bin# mkcephfs -a -c /etc/ceph/ceph.conf -k /etc/ceph/ceph.keyring
> > > temp dir is /tmp/mkcephfs.bErzjDo3P9
> > > preparing monmap in /tmp/mkcephfs.bErzjDo3P9/monmap
> > > /usr/local/bin/monmaptool --create --clobber --add a 10.72.148.217:6789 --print /tmp/mkcephfs.bErzjDo3P9/monmap
> > > /usr/local/bin/monmaptool: monmap file /tmp/mkcephfs.bErzjDo3P9/monmap
> > > /usr/local/bin/monmaptool: generated fsid a63961e3-4aac-4f98-808f-c35bfd52dbfd
> > > epoch 0
> > > fsid a63961e3-4aac-4f98-808f-c35bfd52dbfd
> > > last_changed 2013-02-18 16:23:37.112440
> > > created 2013-02-18 16:23:37.112440
> > > 0: 10.72.148.217:6789/0 mon.a
> > > /usr/local/bin/monmaptool: writing epoch 0 to /tmp/mkcephfs.bErzjDo3P9/monmap (1 monitors)
> > > Building generic osdmap from /tmp/mkcephfs.bErzjDo3P9/conf
> > > /usr/local/bin/osdmaptool: osdmap file '/tmp/mkcephfs.bErzjDo3P9/osdmap'
> > > /usr/local/bin/osdmaptool: writing epoch 1 to /tmp/mkcephfs.bErzjDo3P9/osdmap
> > > Generating admin key at /tmp/mkcephfs.bErzjDo3P9/keyring.admin
> > > creating /tmp/mkcephfs.bErzjDo3P9/keyring.admin
> > > Building initial monitor keyring
> > > cat: /tmp/mkcephfs.bErzjDo3P9/key.*: No such file or directory
> > >
> > > I am pasting my ceph.conf file here:
> > >
> > > [global]
> > > auth cluster required = cephx
> > > auth service required = cephx
> > > auth client required = cephx
> > >
> > > [osd]
> > > osd journal size = 1000
> > > filestore xattr use omap = true
> > > osd data = ""> > > >
> > > [mon.a]
> > > host = varunc5-virtual-machine
> > > mon addr = 10.72.148.217:6789
> > > mon data = ""> > > >
> > > [mds.a]
> > > host = varunc5-virtual-machine
> > > mds data = ""> > > >
> > > [osd.0]
> > > host = varunc5-virtual-machine
> > >
> > > Is there something that I am doing wrong? Please let me know.
> > >
> > > Thanks,
> > > Varun
> > >
> > > On Fri, Feb 15, 2013 at 10:42 PM, Sam Lang <sam.lang@xxxxxxxxxxx> wrote:
> > > On Fri, Feb 15, 2013 at 10:53 AM, Varun Chandramouli
> > > <varun.c37@xxxxxxxxx> wrote:
> > > > No, that is the entire output.
> > >
> > > Hi Varun,
> > >
> > > I don't immediately see how that error is occurring. Could you:
> > >
> > > 1. Add a -x to the first line of mkcephfs:
> > > #!/bin/sh -x
> > >
> > > 2. Rerun it and send us the output
> > > 3. Send us your ceph.conf
> > >
> > > Thanks!
> > > -sam
> > >
> > > >
> > > >
> > > > On Fri, Feb 15, 2013 at 10:20 PM, Noah Watkins <jayhawk@xxxxxxxxxxx> wrote:
> > > >>
> > > >>
> > > >> On Feb 15, 2013, at 8:28 AM, Varun Chandramouli <varun.c37@xxxxxxxxx>
> > > >> wrote:
> > > >>
> > > >> > Generating admin key at /tmp/mkcephfs.Pqu0j1MQsc/keyring.admin
> > > >> > creating /tmp/mkcephfs.Pqu0j1MQsc/keyring.admin
> > > >> > Building initial monitor keyring
> > > >> > cat: /tmp/mkcephfs.Pqu0j1MQsc/key.*: No such file or directory
> > > >>
> > > >> There might be an issue with mkcephfs in master. Is there more to this
> > > >> output after the last line?
> > > >>
> > > >> - Noah
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Varun Chandramouli
> > > > Birla Institute of Technology & Science
> > > > http://in.linkedin.com/in/chandramoulivarun
> > > >
> > > > _______________________________________________
> > > > ceph-users mailing list
> > > > ceph-users@xxxxxxxxxxxxxx
> > > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> > > >
> > >
> > >
> > >
> > > --
> > > Varun Chandramouli
> > > Birla Institute of Technology & Science
> > > http://in.linkedin.com/in/chandramoulivarun
> > > _______________________________________________
> > > ceph-users mailing list
> > > ceph-users@xxxxxxxxxxxxxx
> > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> >
> >
> >
> >
> > --
> > Varun Chandramouli
> > Birla Institute of Technology & Science
> > http://in.linkedin.com/in/chandramoulivarun
>
>
>
>
> --
> Varun Chandramouli
> Birla Institute of Technology & Science
> http://in.linkedin.com/in/chandramoulivarun
>
>
>
> --
> Varun Chandramouli
> Birla Institute of Technology & Science
> http://in.linkedin.com/in/chandramoulivarun
> _______________________________________________
> ceph-users mailing list
> ceph-users@xxxxxxxxxxxxxx
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
Varun Chandramouli
Birla Institute of Technology & Science
http://in.linkedin.com/in/chandramoulivarun
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
