I still am unable to remove the error which I have been getting. I tried re-building ceph, but the same error persists. Someone please help me out.
Thanks a lot
Varun
--
Varun Chandramouli
Birla Institute of Technology & Science
http://in.linkedin.com/in/chandramoulivarun
On Mon, Feb 18, 2013 at 11:05 PM, Varun Chandramouli <varun.c37@xxxxxxxxx> wrote:
Noah,Thanks, turns out I had indeed changed the wrong file. Anyways, now I have changed the correct file. Since the output was too big to be captured and pasted here, I am attaching the file. Hope its ok.VarunOn Mon, Feb 18, 2013 at 10:49 PM, Noah Watkins <jayhawk@xxxxxxxxxxx> wrote:
To make sure you are editing the correct file, run
On Feb 18, 2013, at 9:06 AM, Varun Chandramouli <varun.c37@xxxxxxxxx> wrote:
> Hi Noah,
>
> I made the change (added -x to !/bin/sh -x and uncommented it) to the mkcephfs file available in the source code, /home/varunc/ceph/src/mkcephfs in my case), and the output was what I pasted. find / -name mkcephfs did not return any other location for the file, so I guess there is only one mkcephfs script on my machine. Is there some other file I should be modifying?
#> which mkcephfs
which will print the full path to the script being run.
The first few lines of the top of the script should look like (with the #):
#!/bin/sh -x
#
# mkcephfs
#
# This tool is designed to be flexible. There are two ways to go:
If for some reason it is still not working, you can add an echo statement to confirm:
#!/bin/sh
set -x
echo "I should be seeing this"
#
# mkcephfs
#
# This tool is designed to be flexible. There are two ways to go:
-Noah
>
> Varun
>
> On Mon, Feb 18, 2013 at 9:24 PM, Noah Watkins <jayhawk@xxxxxxxxxxx> wrote:
> Varun,
>
> Are you sure the "-x" made it into the installed mkcephfs script that you are running? The output should be very large and verbose. Here are the first few lines of output--each command should be echoed to the terminal:
>
> nwatkins@kyoto:~/projects/ceph/ceph/src$ ./mkcephfs -a -c ceph.conf
> + set -e
> + dirname ./mkcephfs
> + [ . = . ]
> + [ /home/nwatkins/projects/ceph/ceph/src != /etc/init.d ]
> + BINDIR=.
>
> .. and on and on and on and on and on
>
> On Feb 18, 2013, at 2:58 AM, Varun Chandramouli <varun.c37@xxxxxxxxx> wrote:
>
> > Hi Sam,
> >
> > I tried doing what you said. I added -x to 1st line of mkcephfs, and ran the command again. It again gave the same error:
> >
> > root@varunc5-virtual-machine:/usr/local/bin# mkcephfs -a -c /etc/ceph/ceph.conf -k /etc/ceph/ceph.keyring
> > temp dir is /tmp/mkcephfs.bErzjDo3P9
> > preparing monmap in /tmp/mkcephfs.bErzjDo3P9/monmap
> > /usr/local/bin/monmaptool --create --clobber --add a 10.72.148.217:6789 --print /tmp/mkcephfs.bErzjDo3P9/monmap
> > /usr/local/bin/monmaptool: monmap file /tmp/mkcephfs.bErzjDo3P9/monmap
> > /usr/local/bin/monmaptool: generated fsid a63961e3-4aac-4f98-808f-c35bfd52dbfd
> > epoch 0
> > fsid a63961e3-4aac-4f98-808f-c35bfd52dbfd
> > last_changed 2013-02-18 16:23:37.112440
> > created 2013-02-18 16:23:37.112440
> > 0: 10.72.148.217:6789/0 mon.a
> > /usr/local/bin/monmaptool: writing epoch 0 to /tmp/mkcephfs.bErzjDo3P9/monmap (1 monitors)
> > Building generic osdmap from /tmp/mkcephfs.bErzjDo3P9/conf
> > /usr/local/bin/osdmaptool: osdmap file '/tmp/mkcephfs.bErzjDo3P9/osdmap'
> > /usr/local/bin/osdmaptool: writing epoch 1 to /tmp/mkcephfs.bErzjDo3P9/osdmap
> > Generating admin key at /tmp/mkcephfs.bErzjDo3P9/keyring.admin
> > creating /tmp/mkcephfs.bErzjDo3P9/keyring.admin
> > Building initial monitor keyring
> > cat: /tmp/mkcephfs.bErzjDo3P9/key.*: No such file or directory
> >
> > I am pasting my ceph.conf file here:
> >
> > [global]
> > auth cluster required = cephx
> > auth service required = cephx
> > auth client required = cephx
> >
> > [osd]
> > osd journal size = 1000
> > filestore xattr use omap = true
> > osd data = ""> > >
> > [mon.a]
> > host = varunc5-virtual-machine
> > mon addr = 10.72.148.217:6789
> > mon data = ""> > >
> > [mds.a]
> > host = varunc5-virtual-machine
> > mds data = ""> > >
> > [osd.0]
> > host = varunc5-virtual-machine
> >
> > Is there something that I am doing wrong? Please let me know.
> >
> > Thanks,
> > Varun
> >
> > On Fri, Feb 15, 2013 at 10:42 PM, Sam Lang <sam.lang@xxxxxxxxxxx> wrote:
> > On Fri, Feb 15, 2013 at 10:53 AM, Varun Chandramouli
> > <varun.c37@xxxxxxxxx> wrote:
> > > No, that is the entire output.
> >
> > Hi Varun,
> >
> > I don't immediately see how that error is occurring. Could you:
> >
> > 1. Add a -x to the first line of mkcephfs:
> > #!/bin/sh -x
> >
> > 2. Rerun it and send us the output
> > 3. Send us your ceph.conf
> >
> > Thanks!
> > -sam
> >
> > >
> > >
> > > On Fri, Feb 15, 2013 at 10:20 PM, Noah Watkins <jayhawk@xxxxxxxxxxx> wrote:
> > >>
> > >>
> > >> On Feb 15, 2013, at 8:28 AM, Varun Chandramouli <varun.c37@xxxxxxxxx>
> > >> wrote:
> > >>
> > >> > Generating admin key at /tmp/mkcephfs.Pqu0j1MQsc/keyring.admin
> > >> > creating /tmp/mkcephfs.Pqu0j1MQsc/keyring.admin
> > >> > Building initial monitor keyring
> > >> > cat: /tmp/mkcephfs.Pqu0j1MQsc/key.*: No such file or directory
> > >>
> > >> There might be an issue with mkcephfs in master. Is there more to this
> > >> output after the last line?
> > >>
> > >> - Noah
> > >
> > >
> > >
> > >
> > > --
> > > Varun Chandramouli
> > > Birla Institute of Technology & Science
> > > http://in.linkedin.com/in/chandramoulivarun
> > >
> > > _______________________________________________
> > > ceph-users mailing list
> > > ceph-users@xxxxxxxxxxxxxx
> > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
> > >
> >
> >
> >
> > --
> > Varun Chandramouli
> > Birla Institute of Technology & Science
> > http://in.linkedin.com/in/chandramoulivarun
> > _______________________________________________
> > ceph-users mailing list
> > ceph-users@xxxxxxxxxxxxxx
> > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>
>
>
>
> --
> Varun Chandramouli
> Birla Institute of Technology & Science
> http://in.linkedin.com/in/chandramoulivarun
--
Varun Chandramouli
Birla Institute of Technology & Science
http://in.linkedin.com/in/chandramoulivarun
Varun Chandramouli
Birla Institute of Technology & Science
http://in.linkedin.com/in/chandramoulivarun
_______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
