On Feb 18, 2013, at 9:06 AM, Varun Chandramouli <varun.c37@xxxxxxxxx> wrote: > Hi Noah, > > I made the change (added -x to !/bin/sh -x and uncommented it) to the mkcephfs file available in the source code, /home/varunc/ceph/src/mkcephfs in my case), and the output was what I pasted. find / -name mkcephfs did not return any other location for the file, so I guess there is only one mkcephfs script on my machine. Is there some other file I should be modifying? To make sure you are editing the correct file, run #> which mkcephfs which will print the full path to the script being run. The first few lines of the top of the script should look like (with the #): #!/bin/sh -x # # mkcephfs # # This tool is designed to be flexible. There are two ways to go: If for some reason it is still not working, you can add an echo statement to confirm: #!/bin/sh set -x echo "I should be seeing this" # # mkcephfs # # This tool is designed to be flexible. There are two ways to go: -Noah > > Varun > > On Mon, Feb 18, 2013 at 9:24 PM, Noah Watkins <jayhawk@xxxxxxxxxxx> wrote: > Varun, > > Are you sure the "-x" made it into the installed mkcephfs script that you are running? The output should be very large and verbose. Here are the first few lines of output--each command should be echoed to the terminal: > > nwatkins@kyoto:~/projects/ceph/ceph/src$ ./mkcephfs -a -c ceph.conf > + set -e > + dirname ./mkcephfs > + [ . = . ] > + [ /home/nwatkins/projects/ceph/ceph/src != /etc/init.d ] > + BINDIR=. > > .. and on and on and on and on and on > > On Feb 18, 2013, at 2:58 AM, Varun Chandramouli <varun.c37@xxxxxxxxx> wrote: > > > Hi Sam, > > > > I tried doing what you said. I added -x to 1st line of mkcephfs, and ran the command again. It again gave the same error: > > > > root@varunc5-virtual-machine:/usr/local/bin# mkcephfs -a -c /etc/ceph/ceph.conf -k /etc/ceph/ceph.keyring > > temp dir is /tmp/mkcephfs.bErzjDo3P9 > > preparing monmap in /tmp/mkcephfs.bErzjDo3P9/monmap > > /usr/local/bin/monmaptool --create --clobber --add a 10.72.148.217:6789 --print /tmp/mkcephfs.bErzjDo3P9/monmap > > /usr/local/bin/monmaptool: monmap file /tmp/mkcephfs.bErzjDo3P9/monmap > > /usr/local/bin/monmaptool: generated fsid a63961e3-4aac-4f98-808f-c35bfd52dbfd > > epoch 0 > > fsid a63961e3-4aac-4f98-808f-c35bfd52dbfd > > last_changed 2013-02-18 16:23:37.112440 > > created 2013-02-18 16:23:37.112440 > > 0: 10.72.148.217:6789/0 mon.a > > /usr/local/bin/monmaptool: writing epoch 0 to /tmp/mkcephfs.bErzjDo3P9/monmap (1 monitors) > > Building generic osdmap from /tmp/mkcephfs.bErzjDo3P9/conf > > /usr/local/bin/osdmaptool: osdmap file '/tmp/mkcephfs.bErzjDo3P9/osdmap' > > /usr/local/bin/osdmaptool: writing epoch 1 to /tmp/mkcephfs.bErzjDo3P9/osdmap > > Generating admin key at /tmp/mkcephfs.bErzjDo3P9/keyring.admin > > creating /tmp/mkcephfs.bErzjDo3P9/keyring.admin > > Building initial monitor keyring > > cat: /tmp/mkcephfs.bErzjDo3P9/key.*: No such file or directory > > > > I am pasting my ceph.conf file here: > > > > [global] > > auth cluster required = cephx > > auth service required = cephx > > auth client required = cephx > > > > [osd] > > osd journal size = 1000 > > filestore xattr use omap = true > > osd data = /var/lib/ceph/osd/ceph-$id > > > > [mon.a] > > host = varunc5-virtual-machine > > mon addr = 10.72.148.217:6789 > > mon data = /var/lib/ceph/osd/ceph-a > > > > [mds.a] > > host = varunc5-virtual-machine > > mds data = /var/lib/ceph/osd/ceph-a > > > > [osd.0] > > host = varunc5-virtual-machine > > > > Is there something that I am doing wrong? Please let me know. > > > > Thanks, > > Varun > > > > On Fri, Feb 15, 2013 at 10:42 PM, Sam Lang <sam.lang@xxxxxxxxxxx> wrote: > > On Fri, Feb 15, 2013 at 10:53 AM, Varun Chandramouli > > <varun.c37@xxxxxxxxx> wrote: > > > No, that is the entire output. > > > > Hi Varun, > > > > I don't immediately see how that error is occurring. Could you: > > > > 1. Add a -x to the first line of mkcephfs: > > #!/bin/sh -x > > > > 2. Rerun it and send us the output > > 3. Send us your ceph.conf > > > > Thanks! > > -sam > > > > > > > > > > > On Fri, Feb 15, 2013 at 10:20 PM, Noah Watkins <jayhawk@xxxxxxxxxxx> wrote: > > >> > > >> > > >> On Feb 15, 2013, at 8:28 AM, Varun Chandramouli <varun.c37@xxxxxxxxx> > > >> wrote: > > >> > > >> > Generating admin key at /tmp/mkcephfs.Pqu0j1MQsc/keyring.admin > > >> > creating /tmp/mkcephfs.Pqu0j1MQsc/keyring.admin > > >> > Building initial monitor keyring > > >> > cat: /tmp/mkcephfs.Pqu0j1MQsc/key.*: No such file or directory > > >> > > >> There might be an issue with mkcephfs in master. Is there more to this > > >> output after the last line? > > >> > > >> - Noah > > > > > > > > > > > > > > > -- > > > Varun Chandramouli > > > Birla Institute of Technology & Science > > > http://in.linkedin.com/in/chandramoulivarun > > > > > > _______________________________________________ > > > ceph-users mailing list > > > ceph-users@xxxxxxxxxxxxxx > > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > > > > > > > > > -- > > Varun Chandramouli > > Birla Institute of Technology & Science > > http://in.linkedin.com/in/chandramoulivarun > > _______________________________________________ > > ceph-users mailing list > > ceph-users@xxxxxxxxxxxxxx > > http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com > > > > > -- > Varun Chandramouli > Birla Institute of Technology & Science > http://in.linkedin.com/in/chandramoulivarun _______________________________________________ ceph-users mailing list ceph-users@xxxxxxxxxxxxxx http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
 |