Basically what I see as the channels 1-7 up 8-15 Down 16 MTP 17-24 up 25-31 down This seems very simmetrical. Has anyone seen an issue like this? I can send calls via it and all Kind regards On Wed, Dec 15, 2010 at 1:03 PM, Edrich de Lange <edd at edd.za.net> wrote: > all are Idle > > and > > > [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received > CIC=63 for unequipped circuit (typ=RSC), link 'l2'. > [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received > CIC=60 for unequipped circuit (typ=RSC), link 'l2'. > [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received > CIC=62 for unequipped circuit (typ=RSC), link 'l2'. > [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received > CIC=56 for unequipped circuit (typ=RSC), link 'l2'. > [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received > CIC=61 for unequipped circuit (typ=RSC), link 'l2'. > [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received > CIC=57 for unequipped circuit (typ=RSC), link 'l2'. > [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received > CIC=58 for unequipped circuit (typ=RSC), link 'l2'. > [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received > CIC=59 for unequipped circuit (typ=RSC), link 'l2'. > > > Kind regards > > > > On Wed, Dec 15, 2010 at 11:11 AM, Amish <amish at 3g.co.za> wrote: >> Hi Edrich, >> >> What is the current status of those CICs, with ss7 linestat? >> Idle, Remote Maintenance Blocked, ... >> What messages are displayed on the console? >> >> A. >> >> >> On 12/14/2010 03:52 PM, Edrich de Lange wrote: >>> >>> Good morning >>> >>> I have an issue on one of the links where I have the last 8 cics not >>> functioning. >>> >>> Can anyone provide details on what may cause this? It works perfectly >>> fine on my other link. >>> >>> I have had the provider also check all their termination equipment, >>> and that seems to not be the issue. the card has been replaced aswell. >>> >>> >>> Kind regards >>> >>> >>> On Mon, Dec 13, 2010 at 10:41 AM, Edrich de Lange<edd at edd.za.net> ?wrote: >>>> >>>> Oh, Im using chan_ss7 now. >>>> >>>> Those channels are up on my side though.(says idle) >>>> >>>> Kind regards >>>> >>>> On Mon, Dec 13, 2010 at 10:40 AM, Edrich de Lange<edd at edd.za.net> ?wrote: >>>>> >>>>> Ok, its working fine. >>>>> >>>>> One problem, for some reason the last 8 cics dont come up on the >>>>> remote side, and after a while Im getting these errors >>>>> >>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>>> CIC=59 for unequipped circuit (typ=RSC), link 'l1'. >>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>>> CIC=56 for unequipped circuit (typ=RSC), link 'l1'. >>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>>> CIC=60 for unequipped circuit (typ=RSC), link 'l1'. >>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>>> CIC=62 for unequipped circuit (typ=RSC), link 'l1'. >>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>>> CIC=63 for unequipped circuit (typ=RSC), link 'l1'. >>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>>> CIC=61 for unequipped circuit (typ=RSC), link 'l1'. >>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>>> CIC=58 for unequipped circuit (typ=RSC), link 'l1'. >>>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>>> CIC=57 for unequipped circuit (typ=RSC), link 'l1'. >>>>> >>>>> >>>>> Kind regards >>>>> >>>>> On Sat, Dec 11, 2010 at 8:01 AM, bipin singh<bipinraghuvanshi at gmail.com> >>>>> ?wrote: >>>>>> >>>>>> Hi >>>>>> ? ? ? ? ?Try it >>>>>> >>>>>> adjpointcode=1368 >>>>>> ? ? defaultdpc=1368 >>>>>> >>>>>> and also not set same acp dcp for two links . >>>>>> >>>>>> On Fri, Dec 10, 2010 at 11:11 PM, Edrich de Lange<edd at edd.za.net> >>>>>> ?wrote: >>>>>>> >>>>>>> Good day >>>>>>> >>>>>>> I have a setup using a 4 port Digium Card,Asterisk >>>>>>> 1.6.2.15,libss7-1.0.2,dahdi-linux-complete-2.4.0 >>>>>>> >>>>>>> My dahdi config looks like so : >>>>>>> >>>>>>> # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS/CRC4 >>>>>>> span=2,2,0,ccs,hdb3 >>>>>>> # termtype: te >>>>>>> bchan=32-46,48-62 >>>>>>> mtp2=47 >>>>>>> #echocanceller=mg2,32-46,48-62 >>>>>>> >>>>>>> (the other spans are disabled) >>>>>>> >>>>>>> [channels] >>>>>>> signaling=ss7 ? ? ? ? ? ? ? ? ? ?;this is ss7 signaling >>>>>>> ss7type=itu ? ? ? ? ? ? ? ? ? ? ? ;using the ITU variant >>>>>>> ;ss7_called_nai=dynamic ? ? ? ? ? ;NAI for outgoing calls >>>>>>> ;ss7_calling_nai=dynamic ? ? ? ? ?;NAI for incoming calls >>>>>>> ss7_internationalprefix= ;international prefix value for incoming >>>>>>> calls >>>>>>> ss7_nationalprefix= ? ? ? ? ? ?;national prefix value for incoming >>>>>>> calls >>>>>>> ss7_subscriberprefix= ? ? ? ? ? ?;subscriber prefix value for incoming >>>>>>> calls >>>>>>> ss7_unknownprefix= ? ? ? ? ? ? ?;unknown prefix value for incoming >>>>>>> calls >>>>>>> ss7_explicitacm=yes >>>>>>> ss7_explictacm=yes >>>>>>> >>>>>>> group=1 >>>>>>> context=ss7 >>>>>>> linkset=1 >>>>>>> pointcode=720 ? ? ? ? ? ? ? ? ? ? ?;the point code for this >>>>>>> system...aka >>>>>>> SPC >>>>>>> adjpointcode=1832 ? ? ? ? ? ? ? ? ? ;the point code for the system >>>>>>> that we are signaling to... aka APC >>>>>>> defaultdpc=1368 ? ? ? ? ? ? ? ? ? ? ;the point code for the system >>>>>>> that the CICs will be negotiated with...aka DPC >>>>>>> networkindicator=national_spare ?;NI value for MTP3 >>>>>>> cicbeginswith=32 ? ? ? ? ? ? ? ? ?;the starting value of the CICs >>>>>>> channel=32-46 >>>>>>> cicbeginswith=48 >>>>>>> channel=48-62 ? ? ? ? ? ? ? ? ? ?;the channels that are CICs >>>>>>> sigchan=47 ? ? ? ? ? ? ? ? ? ? ?;the signaling channel >>>>>>> >>>>>>> The Links come up. It seems fine. >>>>>>> When I make a call to the link I get the following on the asterisk CLI >>>>>>> Unhandled optional parameter 0x8 'Optional forward call indicator' >>>>>>> [0x0 ] >>>>>>> Unhandled optional parameter 0x31 'Propagation Delay Counter' >>>>>>> [0x0 0x5a ] >>>>>>> Unhandled optional parameter 0x3f 'Location Number' >>>>>>> [0x84 0x93 0x72 0x38 0x0 0x10 0x7 0x0 0x0 0x0 ] >>>>>>> Unhandled optional parameter 0x39 'Parameter Compatibility >>>>>>> Information' >>>>>>> [0x31 0xd0 0x3f 0xc0 ] >>>>>>> [Dec 10 19:36:12] WARNING[3627]: chan_dahdi.c:11850 ss7_linkset: IAM >>>>>>> on unconfigured CIC 6 >>>>>>> [Dec 10 19:36:13] WARNING[3627]: chan_dahdi.c:12142 ss7_linkset: RLC >>>>>>> on unconfigured CIC 6 >>>>>>> >>>>>>> It doesnt seem to trigger even the extentions. >>>>>>> >>>>>>> I cant get the Chan_ss7 to work, as My DPC and APC are different(if im >>>>>>> mistaken please assist, I would gladly try chan_ss7) >>>>>>> >>>>>>> I just need to get the incoming calls working urgently. >>>>>>> >>>>>>> Any assistance will be greatly appreciated. >>>>>>> >>>>>>> Kind regards >>>>>>> >>>>>>> Edrich de Lange >>>>>>> >>>>>>> -- >>>>>>> _____________________________________________________________________ >>>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>>>>> >>>>>>> asterisk-ss7 mailing list >>>>>>> To UNSUBSCRIBE or update options visit: >>>>>>> ? http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>>>> >>>>>> >>>>>> -- >>>>>> BIPIN RAGHUVANSHI >>>>>> OPERATION HEAD >>>>>> ASTERISK (DEVELOPMENT AND RESEARCH) >>>>>> WWW.EHORIZONS.IN >>>>>> 011-32323262 >>>>>> 011-46334633 >>>>>> >>>>>> -- >>>>>> _____________________________________________________________________ >>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>>>> >>>>>> asterisk-ss7 mailing list >>>>>> To UNSUBSCRIBE or update options visit: >>>>>> ? http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>>>> >> >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> ?http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> >