Hi Edrich, What is the current status of those CICs, with ss7 linestat? Idle, Remote Maintenance Blocked, ... What messages are displayed on the console? A. On 12/14/2010 03:52 PM, Edrich de Lange wrote: > Good morning > > I have an issue on one of the links where I have the last 8 cics not > functioning. > > Can anyone provide details on what may cause this? It works perfectly > fine on my other link. > > I have had the provider also check all their termination equipment, > and that seems to not be the issue. the card has been replaced aswell. > > > Kind regards > > > On Mon, Dec 13, 2010 at 10:41 AM, Edrich de Lange<edd at edd.za.net> wrote: >> Oh, Im using chan_ss7 now. >> >> Those channels are up on my side though.(says idle) >> >> Kind regards >> >> On Mon, Dec 13, 2010 at 10:40 AM, Edrich de Lange<edd at edd.za.net> wrote: >>> Ok, its working fine. >>> >>> One problem, for some reason the last 8 cics dont come up on the >>> remote side, and after a while Im getting these errors >>> >>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>> CIC=59 for unequipped circuit (typ=RSC), link 'l1'. >>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>> CIC=56 for unequipped circuit (typ=RSC), link 'l1'. >>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>> CIC=60 for unequipped circuit (typ=RSC), link 'l1'. >>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>> CIC=62 for unequipped circuit (typ=RSC), link 'l1'. >>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>> CIC=63 for unequipped circuit (typ=RSC), link 'l1'. >>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>> CIC=61 for unequipped circuit (typ=RSC), link 'l1'. >>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>> CIC=58 for unequipped circuit (typ=RSC), link 'l1'. >>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>> CIC=57 for unequipped circuit (typ=RSC), link 'l1'. >>> >>> >>> Kind regards >>> >>> On Sat, Dec 11, 2010 at 8:01 AM, bipin singh<bipinraghuvanshi at gmail.com> wrote: >>>> Hi >>>> Try it >>>> >>>> adjpointcode=1368 >>>> defaultdpc=1368 >>>> >>>> and also not set same acp dcp for two links . >>>> >>>> On Fri, Dec 10, 2010 at 11:11 PM, Edrich de Lange<edd at edd.za.net> wrote: >>>>> Good day >>>>> >>>>> I have a setup using a 4 port Digium Card,Asterisk >>>>> 1.6.2.15,libss7-1.0.2,dahdi-linux-complete-2.4.0 >>>>> >>>>> My dahdi config looks like so : >>>>> >>>>> # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS/CRC4 >>>>> span=2,2,0,ccs,hdb3 >>>>> # termtype: te >>>>> bchan=32-46,48-62 >>>>> mtp2=47 >>>>> #echocanceller=mg2,32-46,48-62 >>>>> >>>>> (the other spans are disabled) >>>>> >>>>> [channels] >>>>> signaling=ss7 ;this is ss7 signaling >>>>> ss7type=itu ;using the ITU variant >>>>> ;ss7_called_nai=dynamic ;NAI for outgoing calls >>>>> ;ss7_calling_nai=dynamic ;NAI for incoming calls >>>>> ss7_internationalprefix= ;international prefix value for incoming calls >>>>> ss7_nationalprefix= ;national prefix value for incoming calls >>>>> ss7_subscriberprefix= ;subscriber prefix value for incoming >>>>> calls >>>>> ss7_unknownprefix= ;unknown prefix value for incoming calls >>>>> ss7_explicitacm=yes >>>>> ss7_explictacm=yes >>>>> >>>>> group=1 >>>>> context=ss7 >>>>> linkset=1 >>>>> pointcode=720 ;the point code for this system...aka >>>>> SPC >>>>> adjpointcode=1832 ;the point code for the system >>>>> that we are signaling to... aka APC >>>>> defaultdpc=1368 ;the point code for the system >>>>> that the CICs will be negotiated with...aka DPC >>>>> networkindicator=national_spare ;NI value for MTP3 >>>>> cicbeginswith=32 ;the starting value of the CICs >>>>> channel=32-46 >>>>> cicbeginswith=48 >>>>> channel=48-62 ;the channels that are CICs >>>>> sigchan=47 ;the signaling channel >>>>> >>>>> The Links come up. It seems fine. >>>>> When I make a call to the link I get the following on the asterisk CLI >>>>> Unhandled optional parameter 0x8 'Optional forward call indicator' >>>>> [0x0 ] >>>>> Unhandled optional parameter 0x31 'Propagation Delay Counter' >>>>> [0x0 0x5a ] >>>>> Unhandled optional parameter 0x3f 'Location Number' >>>>> [0x84 0x93 0x72 0x38 0x0 0x10 0x7 0x0 0x0 0x0 ] >>>>> Unhandled optional parameter 0x39 'Parameter Compatibility Information' >>>>> [0x31 0xd0 0x3f 0xc0 ] >>>>> [Dec 10 19:36:12] WARNING[3627]: chan_dahdi.c:11850 ss7_linkset: IAM >>>>> on unconfigured CIC 6 >>>>> [Dec 10 19:36:13] WARNING[3627]: chan_dahdi.c:12142 ss7_linkset: RLC >>>>> on unconfigured CIC 6 >>>>> >>>>> It doesnt seem to trigger even the extentions. >>>>> >>>>> I cant get the Chan_ss7 to work, as My DPC and APC are different(if im >>>>> mistaken please assist, I would gladly try chan_ss7) >>>>> >>>>> I just need to get the incoming calls working urgently. >>>>> >>>>> Any assistance will be greatly appreciated. >>>>> >>>>> Kind regards >>>>> >>>>> Edrich de Lange >>>>> >>>>> -- >>>>> _____________________________________________________________________ >>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>>> >>>>> asterisk-ss7 mailing list >>>>> To UNSUBSCRIBE or update options visit: >>>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>> >>>> >>>> -- >>>> BIPIN RAGHUVANSHI >>>> OPERATION HEAD >>>> ASTERISK (DEVELOPMENT AND RESEARCH) >>>> WWW.EHORIZONS.IN >>>> 011-32323262 >>>> 011-46334633 >>>> >>>> -- >>>> _____________________________________________________________________ >>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>> >>>> asterisk-ss7 mailing list >>>> To UNSUBSCRIBE or update options visit: >>>> http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>>
|