all are Idle and [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received CIC=63 for unequipped circuit (typ=RSC), link 'l2'. [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received CIC=60 for unequipped circuit (typ=RSC), link 'l2'. [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received CIC=62 for unequipped circuit (typ=RSC), link 'l2'. [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received CIC=56 for unequipped circuit (typ=RSC), link 'l2'. [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received CIC=61 for unequipped circuit (typ=RSC), link 'l2'. [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received CIC=57 for unequipped circuit (typ=RSC), link 'l2'. [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received CIC=58 for unequipped circuit (typ=RSC), link 'l2'. [Dec 15 12:55:29] WARNING[5540]: l4isup.c:4803 l4isup_event: Received CIC=59 for unequipped circuit (typ=RSC), link 'l2'. Kind regards On Wed, Dec 15, 2010 at 11:11 AM, Amish <amish at 3g.co.za> wrote: > Hi Edrich, > > What is the current status of those CICs, with ss7 linestat? > Idle, Remote Maintenance Blocked, ... > What messages are displayed on the console? > > A. > > > On 12/14/2010 03:52 PM, Edrich de Lange wrote: >> >> Good morning >> >> I have an issue on one of the links where I have the last 8 cics not >> functioning. >> >> Can anyone provide details on what may cause this? It works perfectly >> fine on my other link. >> >> I have had the provider also check all their termination equipment, >> and that seems to not be the issue. the card has been replaced aswell. >> >> >> Kind regards >> >> >> On Mon, Dec 13, 2010 at 10:41 AM, Edrich de Lange<edd at edd.za.net> ?wrote: >>> >>> Oh, Im using chan_ss7 now. >>> >>> Those channels are up on my side though.(says idle) >>> >>> Kind regards >>> >>> On Mon, Dec 13, 2010 at 10:40 AM, Edrich de Lange<edd at edd.za.net> ?wrote: >>>> >>>> Ok, its working fine. >>>> >>>> One problem, for some reason the last 8 cics dont come up on the >>>> remote side, and after a while Im getting these errors >>>> >>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>> CIC=59 for unequipped circuit (typ=RSC), link 'l1'. >>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>> CIC=56 for unequipped circuit (typ=RSC), link 'l1'. >>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>> CIC=60 for unequipped circuit (typ=RSC), link 'l1'. >>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>> CIC=62 for unequipped circuit (typ=RSC), link 'l1'. >>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>> CIC=63 for unequipped circuit (typ=RSC), link 'l1'. >>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>> CIC=61 for unequipped circuit (typ=RSC), link 'l1'. >>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>> CIC=58 for unequipped circuit (typ=RSC), link 'l1'. >>>> [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received >>>> CIC=57 for unequipped circuit (typ=RSC), link 'l1'. >>>> >>>> >>>> Kind regards >>>> >>>> On Sat, Dec 11, 2010 at 8:01 AM, bipin singh<bipinraghuvanshi at gmail.com> >>>> ?wrote: >>>>> >>>>> Hi >>>>> ? ? ? ? ?Try it >>>>> >>>>> adjpointcode=1368 >>>>> ? ? defaultdpc=1368 >>>>> >>>>> and also not set same acp dcp for two links . >>>>> >>>>> On Fri, Dec 10, 2010 at 11:11 PM, Edrich de Lange<edd at edd.za.net> >>>>> ?wrote: >>>>>> >>>>>> Good day >>>>>> >>>>>> I have a setup using a 4 port Digium Card,Asterisk >>>>>> 1.6.2.15,libss7-1.0.2,dahdi-linux-complete-2.4.0 >>>>>> >>>>>> My dahdi config looks like so : >>>>>> >>>>>> # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS/CRC4 >>>>>> span=2,2,0,ccs,hdb3 >>>>>> # termtype: te >>>>>> bchan=32-46,48-62 >>>>>> mtp2=47 >>>>>> #echocanceller=mg2,32-46,48-62 >>>>>> >>>>>> (the other spans are disabled) >>>>>> >>>>>> [channels] >>>>>> signaling=ss7 ? ? ? ? ? ? ? ? ? ?;this is ss7 signaling >>>>>> ss7type=itu ? ? ? ? ? ? ? ? ? ? ? ;using the ITU variant >>>>>> ;ss7_called_nai=dynamic ? ? ? ? ? ;NAI for outgoing calls >>>>>> ;ss7_calling_nai=dynamic ? ? ? ? ?;NAI for incoming calls >>>>>> ss7_internationalprefix= ;international prefix value for incoming >>>>>> calls >>>>>> ss7_nationalprefix= ? ? ? ? ? ?;national prefix value for incoming >>>>>> calls >>>>>> ss7_subscriberprefix= ? ? ? ? ? ?;subscriber prefix value for incoming >>>>>> calls >>>>>> ss7_unknownprefix= ? ? ? ? ? ? ?;unknown prefix value for incoming >>>>>> calls >>>>>> ss7_explicitacm=yes >>>>>> ss7_explictacm=yes >>>>>> >>>>>> group=1 >>>>>> context=ss7 >>>>>> linkset=1 >>>>>> pointcode=720 ? ? ? ? ? ? ? ? ? ? ?;the point code for this >>>>>> system...aka >>>>>> SPC >>>>>> adjpointcode=1832 ? ? ? ? ? ? ? ? ? ;the point code for the system >>>>>> that we are signaling to... aka APC >>>>>> defaultdpc=1368 ? ? ? ? ? ? ? ? ? ? ;the point code for the system >>>>>> that the CICs will be negotiated with...aka DPC >>>>>> networkindicator=national_spare ?;NI value for MTP3 >>>>>> cicbeginswith=32 ? ? ? ? ? ? ? ? ?;the starting value of the CICs >>>>>> channel=32-46 >>>>>> cicbeginswith=48 >>>>>> channel=48-62 ? ? ? ? ? ? ? ? ? ?;the channels that are CICs >>>>>> sigchan=47 ? ? ? ? ? ? ? ? ? ? ?;the signaling channel >>>>>> >>>>>> The Links come up. It seems fine. >>>>>> When I make a call to the link I get the following on the asterisk CLI >>>>>> Unhandled optional parameter 0x8 'Optional forward call indicator' >>>>>> [0x0 ] >>>>>> Unhandled optional parameter 0x31 'Propagation Delay Counter' >>>>>> [0x0 0x5a ] >>>>>> Unhandled optional parameter 0x3f 'Location Number' >>>>>> [0x84 0x93 0x72 0x38 0x0 0x10 0x7 0x0 0x0 0x0 ] >>>>>> Unhandled optional parameter 0x39 'Parameter Compatibility >>>>>> Information' >>>>>> [0x31 0xd0 0x3f 0xc0 ] >>>>>> [Dec 10 19:36:12] WARNING[3627]: chan_dahdi.c:11850 ss7_linkset: IAM >>>>>> on unconfigured CIC 6 >>>>>> [Dec 10 19:36:13] WARNING[3627]: chan_dahdi.c:12142 ss7_linkset: RLC >>>>>> on unconfigured CIC 6 >>>>>> >>>>>> It doesnt seem to trigger even the extentions. >>>>>> >>>>>> I cant get the Chan_ss7 to work, as My DPC and APC are different(if im >>>>>> mistaken please assist, I would gladly try chan_ss7) >>>>>> >>>>>> I just need to get the incoming calls working urgently. >>>>>> >>>>>> Any assistance will be greatly appreciated. >>>>>> >>>>>> Kind regards >>>>>> >>>>>> Edrich de Lange >>>>>> >>>>>> -- >>>>>> _____________________________________________________________________ >>>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>>>> >>>>>> asterisk-ss7 mailing list >>>>>> To UNSUBSCRIBE or update options visit: >>>>>> ? http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>>> >>>>> >>>>> -- >>>>> BIPIN RAGHUVANSHI >>>>> OPERATION HEAD >>>>> ASTERISK (DEVELOPMENT AND RESEARCH) >>>>> WWW.EHORIZONS.IN >>>>> 011-32323262 >>>>> 011-46334633 >>>>> >>>>> -- >>>>> _____________________________________________________________________ >>>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>>>> >>>>> asterisk-ss7 mailing list >>>>> To UNSUBSCRIBE or update options visit: >>>>> ? http://lists.digium.com/mailman/listinfo/asterisk-ss7 >>>>> > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-ss7 mailing list > To UNSUBSCRIBE or update options visit: > ?http://lists.digium.com/mailman/listinfo/asterisk-ss7 >
|