Oh, Im using chan_ss7 now. Those channels are up on my side though.(says idle) Kind regards On Mon, Dec 13, 2010 at 10:40 AM, Edrich de Lange <edd at edd.za.net> wrote: > Ok, its working fine. > > One problem, for some reason the last 8 cics dont come up on the > remote side, and after a while Im getting these errors > > [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received > CIC=59 for unequipped circuit (typ=RSC), link 'l1'. > [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received > CIC=56 for unequipped circuit (typ=RSC), link 'l1'. > [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received > CIC=60 for unequipped circuit (typ=RSC), link 'l1'. > [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received > CIC=62 for unequipped circuit (typ=RSC), link 'l1'. > [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received > CIC=63 for unequipped circuit (typ=RSC), link 'l1'. > [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received > CIC=61 for unequipped circuit (typ=RSC), link 'l1'. > [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received > CIC=58 for unequipped circuit (typ=RSC), link 'l1'. > [Dec 13 10:38:54] WARNING[4051]: l4isup.c:4803 l4isup_event: Received > CIC=57 for unequipped circuit (typ=RSC), link 'l1'. > > > Kind regards > > On Sat, Dec 11, 2010 at 8:01 AM, bipin singh <bipinraghuvanshi at gmail.com> wrote: >> Hi >> ? ? ? ?? Try it >> >> adjpointcode=1368 >> ??? defaultdpc=1368 >> >> and also not set same acp dcp for two links . >> >> On Fri, Dec 10, 2010 at 11:11 PM, Edrich de Lange <edd at edd.za.net> wrote: >>> >>> Good day >>> >>> I have a setup using a 4 port Digium Card,Asterisk >>> 1.6.2.15,libss7-1.0.2,dahdi-linux-complete-2.4.0 >>> >>> My dahdi config looks like so : >>> >>> # Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" HDB3/CCS/CRC4 >>> span=2,2,0,ccs,hdb3 >>> # termtype: te >>> bchan=32-46,48-62 >>> mtp2=47 >>> #echocanceller=mg2,32-46,48-62 >>> >>> (the other spans are disabled) >>> >>> [channels] >>> signaling=ss7 ? ? ? ? ? ? ? ? ? ?;this is ss7 signaling >>> ss7type=itu ? ? ? ? ? ? ? ? ? ? ? ;using the ITU variant >>> ;ss7_called_nai=dynamic ? ? ? ? ? ;NAI for outgoing calls >>> ;ss7_calling_nai=dynamic ? ? ? ? ?;NAI for incoming calls >>> ss7_internationalprefix= ;international prefix value for incoming calls >>> ss7_nationalprefix= ? ? ? ? ? ?;national prefix value for incoming calls >>> ss7_subscriberprefix= ? ? ? ? ? ?;subscriber prefix value for incoming >>> calls >>> ss7_unknownprefix= ? ? ? ? ? ? ?;unknown prefix value for incoming calls >>> ss7_explicitacm=yes >>> ss7_explictacm=yes >>> >>> group=1 >>> context=ss7 >>> linkset=1 >>> pointcode=720 ? ? ? ? ? ? ? ? ? ? ?;the point code for this system...aka >>> SPC >>> adjpointcode=1832 ? ? ? ? ? ? ? ? ? ;the point code for the system >>> that we are signaling to... aka APC >>> defaultdpc=1368 ? ? ? ? ? ? ? ? ? ? ;the point code for the system >>> that the CICs will be negotiated with...aka DPC >>> networkindicator=national_spare ?;NI value for MTP3 >>> cicbeginswith=32 ? ? ? ? ? ? ? ? ?;the starting value of the CICs >>> channel=32-46 >>> cicbeginswith=48 >>> channel=48-62 ? ? ? ? ? ? ? ? ? ?;the channels that are CICs >>> sigchan=47 ? ? ? ? ? ? ? ? ? ? ?;the signaling channel >>> >>> The Links come up. It seems fine. >>> When I make a call to the link I get the following on the asterisk CLI >>> Unhandled optional parameter 0x8 'Optional forward call indicator' >>> [0x0 ] >>> Unhandled optional parameter 0x31 'Propagation Delay Counter' >>> [0x0 0x5a ] >>> Unhandled optional parameter 0x3f 'Location Number' >>> [0x84 0x93 0x72 0x38 0x0 0x10 0x7 0x0 0x0 0x0 ] >>> Unhandled optional parameter 0x39 'Parameter Compatibility Information' >>> [0x31 0xd0 0x3f 0xc0 ] >>> [Dec 10 19:36:12] WARNING[3627]: chan_dahdi.c:11850 ss7_linkset: IAM >>> on unconfigured CIC 6 >>> [Dec 10 19:36:13] WARNING[3627]: chan_dahdi.c:12142 ss7_linkset: RLC >>> on unconfigured CIC 6 >>> >>> It doesnt seem to trigger even the extentions. >>> >>> I cant get the Chan_ss7 to work, as My DPC and APC are different(if im >>> mistaken please assist, I would gladly try chan_ss7) >>> >>> I just need to get the incoming calls working urgently. >>> >>> Any assistance will be greatly appreciated. >>> >>> Kind regards >>> >>> Edrich de Lange >>> >>> -- >>> _____________________________________________________________________ >>> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >>> >>> asterisk-ss7 mailing list >>> To UNSUBSCRIBE or update options visit: >>> ? http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> >> >> >> -- >> BIPIN RAGHUVANSHI >> OPERATION HEAD >> ASTERISK (DEVELOPMENT AND RESEARCH) >> WWW.EHORIZONS.IN >> 011-32323262 >> 011-46334633 >> >> -- >> _____________________________________________________________________ >> -- Bandwidth and Colocation Provided by http://www.api-digital.com -- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> ? http://lists.digium.com/mailman/listinfo/asterisk-ss7 >> >
|