Dennis
On 28 August 2017 6:22:12 pm GMT-05:00, Stewart Samuels <searider74@xxxxxxxxx> wrote:
HI Dennis,
I've now got the system booting from the eMMC card.
Thanks again for the tip. I noticed earlier as well that the mmc_block
module was not being loaded. I tried adding the mmc_block and
pwrseq_emmc modules as kernel parameters on the append line of the
extlinux.conf file but that failed. Rebuilding them into the initramfs
image was the key and works but only if one updates the UUID information
for the devices in both extlinux.conf and /etc/fstab.
I am currently in process of performing a "dnf update", to update to the
latest release information.
BTW, any new thoughts on getting the USB 3 Hub to recognize devices?
Kind regards,
Stewart
On 08/28/2017 11:03 AM, Dennis Gilmore wrote:El jue, 24-08-2017 a las 16:47 -0700, Stewart Samuels escribió:All,you will need to rebuild the initrd pwrseq_emmc driver is missing from
I have been working toward getting the Odroid-Xu4 to boot from the
eMMC card but the system continues to fail in the same place no
matter what I try. It dumps me into the dracut shell when it cannot
find the root partition. I suspect one or more modules are not being
loaded when booting from the eMMC. Following is my serial console
output along with some output from the dracut shell. Does anyone
have any ideas of what to try next?
the initrd for it to boot
simplest would be in a odroid-xu4 running from microsd
mount /dev/mmcblk1p4 /mnt/
[ 192.561457] EXT4-fs (mmcblk1p4): mounted filesystem with ordered
data mode. Opts: (null)
[root@localhost ~]# mount /dev/mmcblk1p2 /mnt/boot/
[ 199.515666] EXT4-fs (mmcblk1p2): mounted filesystem with ordered
data mode. Opts: (null)
[root@localhost ~]# mount -o bind /proc/ /mnt/proc/
[root@localhost ~]# mount -o bind /dev /mnt/dev/
[root@localhost ~]# mount -o bind /sys /mnt/sys/
[root@localhost ~]# chroot /mnt/
[root@localhost /]# ls /boot/initramfs-4.11.8-300.fc26.armv7hl.img
/boot/initramfs-4.11.8-300.fc26.armv7hl.img
[root@localhost /]# dracut -f /boot/initramfs-4.11.8-
300.fc26.armv7hl.img 4.11.8-300.fc26.armv7hl --add-drivers=pwrseq_emmc
dracut: No '/dev/log' or 'logger' included for syslog logging
[ 266.023281] dracut[1123] No '/dev/log' or 'logger' included for
syslog logging
[ 266.525885] dracut[1123] Executing: /usr/bin/dracut -f
/boot/initramfs-4.11.8-300.fc26.armv7hl.img 4.11.8-300.fc26.armv7hl --
add-drivers=pwrseq_emmc
[ 268.332160] dracut[1123] dracut module 'busybox' will not be
installed, because command 'busybox' could not be found!
[ 271.270476] dracut[1123] dracut module 'biosdevname' will not be
installed, because command 'biosdevname' could not be found!
[ 272.332576] dracut[1123] dracut module 'busybox' will not be
installed, because command 'busybox' could not be found!
[ 275.163080] dracut[1123] *** Including module: bash ***
[ 275.271157] dracut[1123] *** Including module: systemd ***
[ 277.999389] dracut[1123] *** Including module: systemd-initrd ***
[ 278.258202] dracut[1123] *** Including module: nss-softokn ***
[ 278.391379] dracut[1123] *** Including module: i18n ***
[ 279.961126] dracut[1123] *** Including module: network ***
[ 280.840479] dracut[1123] *** Including module: ifcfg ***
[ 280.944682] dracut[1123] *** Including module: drm ***
[ 281.289211] dracut[1123] *** Including module: plymouth ***
[ 287.496441] dracut[1123] *** Including module: kernel-modules ***
[ 292.246621] dracut[1123] *** Including module: kernel-network-
modules ***
[ 292.708417] dracut[1123] *** Including module: rootfs-block ***
[ 292.848379] dracut[1123] *** Including module: terminfo ***
[ 293.002630] dracut[1123] *** Including module: udev-rules ***
[ 293.119264] dracut[1123] Skipping udev rule: 40-redhat.rules
[ 293.141983] dracut[1123] Skipping udev rule: 50-firmware.rules
[ 293.164948] dracut[1123] Skipping udev rule: 50-udev.rules
[ 295.151142] dracut[1123] Skipping udev rule: 91-permissions.rules
[ 295.175105] dracut[1123] Skipping udev rule: 80-drivers-
modprobe.rules
[ 295.413595] dracut[1123] *** Including module: dracut-systemd ***
[ 296.271524] dracut[1123] *** Including module: usrmount ***
[ 296.333878] dracut[1123] *** Including module: base ***
[ 296.920925] dracut[1123] *** Including module: fs-lib ***
[ 297.128453] dracut[1123] *** Including module: shutdown ***
[ 297.775668] dracut[1123] *** Including modules done ***
[ 297.894924] dracut[1123] *** Installing kernel module dependencies
***
[ 298.210530] dracut[1123] *** Installing kernel module dependencies
done ***
[ 298.345975] dracut[1123] *** Resolving executable dependencies ***
[ 307.763333] dracut[1123] *** Resolving executable dependencies
done***
[ 307.935750] dracut[1123] *** Hardlinking files ***
[ 308.148979] dracut[1123] *** Hardlinking files done ***
[ 308.177952] dracut[1123] *** Stripping files ***
[ 311.695060] dracut[1123] *** Stripping files done ***
[ 311.720850] dracut[1123] *** Generating early-microcode cpio image
***
[ 311.816458] dracut[1123] *** Constructing AuthenticAMD.bin ****
[ 311.986099] dracut[1123] *** Store current command line parameters
***
[ 312.021042] dracut[1123] Stored kernel commandline:
[ 312.045569] dracut[1123] No dracut internal kernel commandline
stored in the initramfs
[ 312.072734] dracut[1123] *** Creating image file '/boot/initramfs-
4.11.8-300.fc26.armv7hl.img' ***
[ 375.498351] dracut[1123] *** Creating initramfs image file
'/boot/initramfs-4.11.8-300.fc26.armv7hl.img' done ***
[root@localhost /]# exit
exit
[root@localhost ~]# reboot
it should then boot. I plugged in the emmc from my pinebook to see if
it worked. u-boot is not loading from it but its otherwise working okay
Dennis
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
_______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx