El mié, 23-08-2017 a las 11:46 -0700, Stewart Samuels escribió: > Dennis, > > Have you tried building the system on an eMMC card and booting that? > Just curious. > > Thanks, > > Stewart I have not, I do not have a emmc card Dennis > On 08/23/2017 10:41 AM, Dennis Gilmore wrote: > > El mié, 23-08-2017 a las 09:13 -0700, Stewart Samuels escribió: > > > Hi Dennis, > > > > > > I have been doing the same process as you with the exception that > > > I > > > change the UUIDs in extlinux.conf and /etc/fstab. The other > > > thing I > > > do, because I change update the UUIDs, is create a new > > > initramfs. I > > > will try again later without creating a new initramfs to see if I > > > can > > > get to where you are. BTW, I also am trying to load the Mate > > > spin, > > > not the server release. > > > > > > Can you try an experiment for me? Can you try to upgrade your > > > system > > > doing a "dnf -y update" command. The reboot to ensure it reboots > > > with the new kernel? By doing the dnf upgrade, you will force > > > the > > > system to use dracut to create a new initramfs image. Let's see > > > if > > > this now works. This is essentially where the system began > > > failing > > > after f24. We need some confidence that the upgrade process is > > > not > > > going to kill our path forward. > > > > I plugged in a usb2 ethernet adapter and updated the system and it > > came > > back fine, however I had to use a usb2 ethernet adapater in the > > usb2 > > port as it seems the usb3 port is not working, the ethernet onboard > > is > > wired up via usb3. 4.12.5-300.fc26.armv7hl is the new kernel. > > > > > > Dennis > > > > > Thanks. > > > > > > Stewart > > > > > > On 08/23/2017 08:43 AM, Dennis Gilmore wrote: > > > > El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió: > > > > > Am 23.08.2017 um 16:20 schrieb Dennis Gilmore: > > > > > -- > > > > > > > > > > Hello Dennis, > > > > > > > > > > that looks beautiful. You have a running Odroid-XU4 with > > > > > actual > > > > > Kernel > > > > > with Fedora 26 !! > > > > > > > > > > How did you manage it? I haven't so much luck with the > > > > > installation. > > > > > > > > > > Thanks > > > > > Andreas > > > > > > > > I ran > > > > > > > > xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb > > > > bs=4MiB > > > > cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin > > > > cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin > > > > I grabbed from https://github.com/hardkernel/u-boot/tree/odroid > > > > xu4- > > > > v201 > > > > 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot > > > > tzsw.bin.hardkernel and sd_fusing.sh > > > > then ran > > > > sh sd_fusing.sh /dev/sdb > > > > I used parted to resize partition 4 mounted it and ran > > > > xfs_growfs > > > > so it > > > > filled the sd card > > > > > > > > I mounted partition 2 and edited extlinux/extlinux.conf adding > > > > cpuidle.off=1 to the append line. I did have to edit etc/passwd > > > > and > > > > unlock the root account as initial-setup is not running. > > > > > > > > of couse /dev/sdb was my sdcard, make sure you have the right > > > > device > > > > for yours. It does seem that the nic is not detected however. > > > > > > > > Dennis > > > > > > > > > > > > _______________________________________________ > > > > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > > > > To unsubscribe send an email to arm-leave@lists.fedoraproject.o > > > > rg > > > > > > > > > _______________________________________________ > > > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > > > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx > > > > > > > > > _______________________________________________ > > > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > > > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx > > _______________________________________________ > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
Attachment:
signature.asc
Description: This is a digitally signed message part
_______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
