El mié, 23-08-2017 a las 09:13 -0700, Stewart Samuels escribió: > Hi Dennis, > > I have been doing the same process as you with the exception that I > change the UUIDs in extlinux.conf and /etc/fstab. The other thing I > do, because I change update the UUIDs, is create a new initramfs. I > will try again later without creating a new initramfs to see if I can > get to where you are. BTW, I also am trying to load the Mate spin, > not the server release. > > Can you try an experiment for me? Can you try to upgrade your system > doing a "dnf -y update" command. The reboot to ensure it reboots > with the new kernel? By doing the dnf upgrade, you will force the > system to use dracut to create a new initramfs image. Let's see if > this now works. This is essentially where the system began failing > after f24. We need some confidence that the upgrade process is not > going to kill our path forward. I plugged in a usb2 ethernet adapter and updated the system and it came back fine, however I had to use a usb2 ethernet adapater in the usb2 port as it seems the usb3 port is not working, the ethernet onboard is wired up via usb3. 4.12.5-300.fc26.armv7hl is the new kernel. Dennis > Thanks. > > Stewart > > On 08/23/2017 08:43 AM, Dennis Gilmore wrote: > > El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió: > > > Am 23.08.2017 um 16:20 schrieb Dennis Gilmore: > > > -- > > > > > > Hello Dennis, > > > > > > that looks beautiful. You have a running Odroid-XU4 with actual > > > Kernel > > > with Fedora 26 !! > > > > > > How did you manage it? I haven't so much luck with the > > > installation. > > > > > > Thanks > > > Andreas > > > > I ran > > > > xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB > > cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin > > cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin > > I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4- > > v201 > > 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot > > tzsw.bin.hardkernel and sd_fusing.sh > > then ran > > sh sd_fusing.sh /dev/sdb > > I used parted to resize partition 4 mounted it and ran xfs_growfs > > so it > > filled the sd card > > > > I mounted partition 2 and edited extlinux/extlinux.conf adding > > cpuidle.off=1 to the append line. I did have to edit etc/passwd and > > unlock the root account as initial-setup is not running. > > > > of couse /dev/sdb was my sdcard, make sure you have the right > > device > > for yours. It does seem that the nic is not detected however. > > > > Dennis > > > > > > _______________________________________________ > > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx > > _______________________________________________ > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
Attachment:
signature.asc
Description: This is a digitally signed message part
_______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
