On Thu, Aug 24, 2017 at 1:34 AM, Stewart Samuels <searider74@xxxxxxxxx> wrote: > Okay. I can confirm I can now boot the USB device to completion. I was > also successfully able to upgrade the system using the "dnf -y update" > command and reboot successfully using the newer kernel. The key was NOT to > create a new initramfs image after changing the UUIDs for the root > partition. As well, the cpuidle.off=1 kernel boot parameter was required in > the extlinux.conf file. > > I did NOT concatenate the u-boot.bin and u-boot.dtb files. I just flashed > the u-boot.bin with the other files from Hardkernel that Dennis specifies > below. > > There are two problems I see right off the bat. First, as Dennis mentions, > the USB3 ports do not work. Second, only 4 of the 8 cpus seem to be working > based on a top command. Even so, the system actually seems pretty > responsive and usable. What does lscpu show? I suspect being a big.little platform you'll find that all the CPUs work but it might only run one cluster at a time, or only power up the second cluster under load. I'm not sure what the algorithms the cpu frequency drivers use for the exynos platforms, I suspect it depends on other factors as well such as thermal temp (the tmon util in kernel-tools might give you insight there). > I will now attempt to get the system installed on the eMMC card. I will > report on that progress later. > > Stewart > > > On 08/23/2017 04:39 PM, Dennis Gilmore wrote: >> >> El mié, 23-08-2017 a las 14:43 -0700, Stewart Samuels escribió: >>> >>> HI Dennis >>> >>> Examining your process stated below, did you really append the u- >>> boot.dtb to the u-boot.bin file in the u-boot-dtb.bin file? Why did >>> you concatenate them? That seems out of the norm. Why not just >>> flash the u-boot.bin file provided by Fedora? >>> >>> Regards, >>> Stewart >> >> I did concatnate them. From experience u-boot will load the dtb from >> the end of the u-boot binary. and u-boot needs the dtb in modern u- >> boots to define the hardware. u-boot build process for some boards does >> the concatnation, not sure if the xu3 u-boot makes a u-boot-dtb.bin >> file and we do not ship it, or its just not making it. >> >> Dennis >>> >>> On 08/23/2017 08:43 AM, Dennis Gilmore wrote: >>>> >>>> El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió: >>>>> >>>>> Am 23.08.2017 um 16:20 schrieb Dennis Gilmore: >>>>> -- >>>>> >>>>> Hello Dennis, >>>>> >>>>> that looks beautiful. You have a running Odroid-XU4 with actual >>>>> Kernel >>>>> with Fedora 26 !! >>>>> >>>>> How did you manage it? I haven't so much luck with the >>>>> installation. >>>>> >>>>> Thanks >>>>> Andreas >>>> >>>> I ran >>>> >>>> xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB >>>> cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin >>>> cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin >>>> I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4- >>>> v201 >>>> 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot >>>> tzsw.bin.hardkernel and sd_fusing.sh >>>> then ran >>>> sh sd_fusing.sh /dev/sdb >>>> I used parted to resize partition 4 mounted it and ran xfs_growfs >>>> so it >>>> filled the sd card >>>> >>>> I mounted partition 2 and edited extlinux/extlinux.conf adding >>>> cpuidle.off=1 to the append line. I did have to edit etc/passwd and >>>> unlock the root account as initial-setup is not running. >>>> >>>> of couse /dev/sdb was my sdcard, make sure you have the right >>>> device >>>> for yours. It does seem that the nic is not detected however. >>>> >>>> Dennis >>>> >>>> >>>> _______________________________________________ >>>> arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx >>>> To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx >>> >>> _______________________________________________ >>> arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx >>> To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx >> >> _______________________________________________ >> arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx >> To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx > > _______________________________________________ > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
