El mié, 23-08-2017 a las 14:43 -0700, Stewart Samuels escribió: > HI Dennis > > Examining your process stated below, did you really append the u- > boot.dtb to the u-boot.bin file in the u-boot-dtb.bin file? Why did > you concatenate them? That seems out of the norm. Why not just > flash the u-boot.bin file provided by Fedora? > > Regards, > Stewart I did concatnate them. From experience u-boot will load the dtb from the end of the u-boot binary. and u-boot needs the dtb in modern u- boots to define the hardware. u-boot build process for some boards does the concatnation, not sure if the xu3 u-boot makes a u-boot-dtb.bin file and we do not ship it, or its just not making it. Dennis > > On 08/23/2017 08:43 AM, Dennis Gilmore wrote: > > El mié, 23-08-2017 a las 16:56 +0200, Andreas Reschke escribió: > > > Am 23.08.2017 um 16:20 schrieb Dennis Gilmore: > > > -- > > > > > > Hello Dennis, > > > > > > that looks beautiful. You have a running Odroid-XU4 with actual > > > Kernel > > > with Fedora 26 !! > > > > > > How did you manage it? I haven't so much luck with the > > > installation. > > > > > > Thanks > > > Andreas > > > > I ran > > > > xzcat Fedora-Server-armhfp-26-1.5-sda.raw.xz|dd of=/dev/sdb bs=4MiB > > cat /usr/share/uboot/odroid-xu3/u-boot.bin > u-boot-dtb.bin > > cat /usr/share/uboot/odroid-xu3/u-boot.dtb >> u-boot-dtb.bin > > I grabbed from https://github.com/hardkernel/u-boot/tree/odroidxu4- > > v201 > > 7.05/sd_fuse bl1.bin.hardkernel bl2.bin.hardkernel.720k_uboot > > tzsw.bin.hardkernel and sd_fusing.sh > > then ran > > sh sd_fusing.sh /dev/sdb > > I used parted to resize partition 4 mounted it and ran xfs_growfs > > so it > > filled the sd card > > > > I mounted partition 2 and edited extlinux/extlinux.conf adding > > cpuidle.off=1 to the append line. I did have to edit etc/passwd and > > unlock the root account as initial-setup is not running. > > > > of couse /dev/sdb was my sdcard, make sure you have the right > > device > > for yours. It does seem that the nic is not detected however. > > > > Dennis > > > > > > _______________________________________________ > > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx > > _______________________________________________ > arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx > To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx _______________________________________________ arm mailing list -- arm@xxxxxxxxxxxxxxxxxxxxxxx To unsubscribe send an email to arm-leave@xxxxxxxxxxxxxxxxxxxxxxx
