----- Original Message ----- > Forgot to ask: will Rawhide also give me gfx on A20 ? (banana pi) I was able to boot the Xfce image from the 29th, initial-setup is displayed on the serial console (text), but once completed I was able to log in and use the GUI on the Banana Pi. Paul > > Thanks, Frans > > 2015-01-29 22:54 GMT+01:00 Frans Meulenbroeks < fransmeulenbroeks@xxxxxxxxx > > : > > > > Hi Hans, > > Thanks for your info.That helped big time. > I had the hdmi connected to an alternate input of my monitor and switched > monitor input after booting.... > I did a quick test booting the board with the monitor input to HDMI and it > worked like a charm! > > Thanks again, Frans. > > PS: looking forward to your talk @ Fosdem. > > 2015-01-29 12:24 GMT+01:00 Hans de Goede < hdegoede@xxxxxxxxxx > : > > > Hi, > > On 29-01-15 11:34, Frans Meulenbroeks wrote: > > > Hi Hans, all > > Took a bit of time, but managed to do a test with > Fedora-Xfce-armhfp-rawhide- 20150128-sda.raw.xz > < https://kojipkgs. fedoraproject.org//work/tasks/ 6681/8756681/Fedora-Xfce- > armhfp-rawhide-20150128-sda. raw.xz > > > I also took the u-boot from that one. Md5sum: > 0829a585ac67b135e2a9f0b1a9279c 0d u-boot-sunxi-with-spl.bin > > I did check both VGA and HDMI but got no output on either ports. > > I could ssh into the board with some effort: > The information here: > https://fedoraproject.org/ wiki/Architectures/ARM/F21/ Installation#FAQ > is incomplete. > I also had to disable selinux (the keys I had did not have an selinux > context) > http://docs.fedoraproject.org/ nl-NL/Fedora/11/html/Security- > Enhanced_Linux/sect-Security- Enhanced_Linux-Enabling_and_ > Disabling_SELinux-Disabling_ SELinux.html > > I also tried startx but it complained that no screens were found. > > fpaste of dmesg: > http://paste.fedoraproject. org/177436/42252728 > > fpaste of /proc/devices: > http://paste.fedoraproject. org/177437/27367142 > > If there is any other info you want me to share or additional tests you > want me to do, let me know (might take a day or so before I get to it > though) > > To get HDMI out you need to have a hdmi cable plugged in (on both ends) > before booting the device, if no cable is detected u-boot will continue > without initializing hdmi. Note that the current rawhide u-boot only > does 1024x768. Upstream u-boot git master does DDC + EDID and then uses > the monitor / tv's native resolution. > > Regards, > > Hans > > > > _______________________________________________ > arm mailing list > arm@xxxxxxxxxxxxxxxxxxxxxxx > https://admin.fedoraproject.org/mailman/listinfo/arm _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
