Hi, On 29-01-15 11:34, Frans Meulenbroeks wrote:
Hi Hans, all Took a bit of time, but managed to do a test with Fedora-Xfce-armhfp-rawhide-20150128-sda.raw.xz <https://kojipkgs.fedoraproject.org//work/tasks/6681/8756681/Fedora-Xfce-armhfp-rawhide-20150128-sda.raw.xz> I also took the u-boot from that one. Md5sum: 0829a585ac67b135e2a9f0b1a9279c0d u-boot-sunxi-with-spl.bin I did check both VGA and HDMI but got no output on either ports. I could ssh into the board with some effort: The information here: https://fedoraproject.org/wiki/Architectures/ARM/F21/Installation#FAQ is incomplete. I also had to disable selinux (the keys I had did not have an selinux context) http://docs.fedoraproject.org/nl-NL/Fedora/11/html/Security-Enhanced_Linux/sect-Security-Enhanced_Linux-Enabling_and_Disabling_SELinux-Disabling_SELinux.html I also tried startx but it complained that no screens were found. fpaste of dmesg: http://paste.fedoraproject.org/177436/42252728 fpaste of /proc/devices: http://paste.fedoraproject.org/177437/27367142 If there is any other info you want me to share or additional tests you want me to do, let me know (might take a day or so before I get to it though)
To get HDMI out you need to have a hdmi cable plugged in (on both ends) before booting the device, if no cable is detected u-boot will continue without initializing hdmi. Note that the current rawhide u-boot only does 1024x768. Upstream u-boot git master does DDC + EDID and then uses the monitor / tv's native resolution. Regards, Hans _______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
