Hi Hans, all
Took a bit of time, but managed to do a test with I also took the u-boot from that one. Md5sum:0829a585ac67b135e2a9f0b1a9279c0d u-boot-sunxi-with-spl.bin
is incomplete.
I also had to disable selinux (the keys I had did not have an selinux context)
http://docs.fedoraproject.org/nl-NL/Fedora/11/html/Security-Enhanced_Linux/sect-Security-Enhanced_Linux-Enabling_and_Disabling_SELinux-Disabling_SELinux.html
I also had to disable selinux (the keys I had did not have an selinux context)
http://docs.fedoraproject.org/nl-NL/Fedora/11/html/Security-Enhanced_Linux/sect-Security-Enhanced_Linux-Enabling_and_Disabling_SELinux-Disabling_SELinux.html
I also tried startx but it complained that no screens were found.
If there is any other info you want me to share or additional tests you want me to do, let me know (might take a day or so before I get to it though)
Best regards, Frans
2015-01-26 8:33 GMT+01:00 Hans de Goede <hdegoede@xxxxxxxxxx>:
Hi,u-boot & the kernel in F-21 do not support hdmi out on A10 devices, however
On 26-01-15 08:31, Frans Meulenbroeks wrote:
Apparently this did not make it to the list. Guess this is because my list
membership was not approved yet then.
2015-01-25 11:30 GMT+01:00 Frans Meulenbroeks <fransmeulenbroeks@xxxxxxxxx>:
Hi,
I was trying to see which of the ARM boards I had lying around would boot
FC21.
I followed these instructions:
http://fedoraproject.org/wiki/Architectures/ARM/F21/Installation
With these I managed to boot FC21 successfully on
- orange pi (A20, similar to banana pi)
- pandaboard
- beaglebone white
However, although according to the instructions the same MLO and u-boot
are to be used for beaglebone black, it does not boot there, although the
very same card works with beaglebone white.
I have added a serial port to the BBB and captured the boot log. See at
the end of this message.
Anyone an idea what is wrong?
While at it:
According to
http://fedoraproject.org/wiki/Architectures/ARM/F21/Installation/Hardware_Status
beagleboard XM also works but there is no u-boot data in the image for XM.
Suggestions for this?
And I noticed the u-boot dir also contains a u-boot for the Mele A1000. I
wanted to try that one the A2000 which is identical hw, but it did not work
(and I do not have serial for the A2000)
Anyone a suggestion.
rawhide does, so give rawhide a try with the A1000 u-boot (from rawhide)
that should give you video output and hopefully will tell you more.
Regards,
Hans
_______________________________________________ arm mailing list arm@xxxxxxxxxxxxxxxxxxxxxxx https://admin.fedoraproject.org/mailman/listinfo/arm
