It's working great in "Vender" mode now. Thanks again for all your help. Yes, I'm fine with being credited if you think I've done enough to deserve it. :-) You can use this email address, alsa-user@xxxxxxxxxxxxxx On Fri, Apr 30, 2010 at 01:03, Clemens Ladisch <clemens@xxxxxxxxxx> wrote: > I wrote: >> This cannot be fixed with a simple entry in the quirks header; I'll >> write a new patch for the driver. > > Please apply the patch below (in addition to the quirks-table.h patch), > or get the new file from <http://www.alsa-project.org/~clemens/format.c>. > > If you are OK with being credited, what e-mail address should be used? > Reported-any-tested-by: Jim Grusendorf <???> > > > --- a/sound/usb/format.c > +++ b/sound/usb/format.c > @@ -77,8 +77,11 @@ > format = 1 << UAC_FORMAT_TYPE_I_PCM; > } > if (format & (1 << UAC_FORMAT_TYPE_I_PCM)) { > - if (sample_width > sample_bytes * 8) { > - snd_printk(KERN_INFO "%d:%u:%d : sample bitwidth %d in over sample bytes %d\n", > + if (chip->usb_id == USB_ID(0x0582, 0x0016) /* Edirol SD-90 */ && > + sample_width == 24 && sample_bytes == 2) { > + sample_bytes = 3; > + } else if (sample_width > sample_bytes * 8) { > + snd_printk(KERN_ERR "%d:%u:%d : sample bitwidth %d is over sample bytes %d\n", > chip->dev->devnum, fp->iface, fp->altsetting, > sample_width, sample_bytes); > } > ------------------------------------------------------------------------------ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
