I wrote: > This cannot be fixed with a simple entry in the quirks header; I'll > write a new patch for the driver. Please apply the patch below (in addition to the quirks-table.h patch), or get the new file from <http://www.alsa-project.org/~clemens/format.c>. If you are OK with being credited, what e-mail address should be used? Reported-any-tested-by: Jim Grusendorf <???> --- a/sound/usb/format.c +++ b/sound/usb/format.c @@ -77,8 +77,11 @@ format = 1 << UAC_FORMAT_TYPE_I_PCM; } if (format & (1 << UAC_FORMAT_TYPE_I_PCM)) { - if (sample_width > sample_bytes * 8) { - snd_printk(KERN_INFO "%d:%u:%d : sample bitwidth %d in over sample bytes %d\n", + if (chip->usb_id == USB_ID(0x0582, 0x0016) /* Edirol SD-90 */ && + sample_width == 24 && sample_bytes == 2) { + sample_bytes = 3; + } else if (sample_width > sample_bytes * 8) { + snd_printk(KERN_ERR "%d:%u:%d : sample bitwidth %d is over sample bytes %d\n", chip->dev->devnum, fp->iface, fp->altsetting, sample_width, sample_bytes); } ------------------------------------------------------------------------------ _______________________________________________ Alsa-user mailing list Alsa-user@xxxxxxxxxxxxxxxxxxxxx https://lists.sourceforge.net/lists/listinfo/alsa-user
