OK, first result onhttp://www.google.hr/search?hl=hr&q=alsa+default+device+in+asound.conf&btnG=Google+pretra%C5%BEivanje&meta=gives me http://alsa.opensrc.org/index.php?title=FAQ026 - you triedthat? 2008/9/12 Eric T. Barnett <ebarnett@xxxxxxxxxx>:> As stated in my first post, the hardware works on stuff I can direct to that port. I need a working asound.conf so programs that I can't do that with and only use the default port will work. So far 3 forums and Google hasn't gotten me there yet which is frustrating to no end as I would have figured that SOMEONE out in Linux-land would have an answer for this. This card was recommended on a couple of forums and sounds GREAT when it works but for the life of me I can't get the default to work properly.>> Thanks,> Eric>> -----Original Message-----> From: Vedran Miletić [mailto:rivanvx@xxxxxxxxx]> Sent: Friday, September 12, 2008 12:54 PM> To: Eric T. Barnett> Cc: alsa-user@xxxxxxxxxxxxxxxxxxxxx> Subject: Re: Need SPDIF out asound.conf for CMI8768>> I have no idea how to do it within the config file. You can google for> that. But first check that it works when you use mplayer:> mplayer -ao alsa:device=hw=0.2 blah.mp3> You might need to resample to 48K, not sure about it:> mplayer -srate 48000 -ao alsa:device=hw=0.2 blah.mp3> If this still doesn't work, try plughw (wiht or without resampling):> mplayer -srate 48000 -ao alsa:device=plughw=0.2 blah.mp3>> 2008/9/12 Eric T. Barnett <ebarnett@xxxxxxxxxx>:>> Ok I'm going to sound stupid here, but how?>>>> The software I'm using doesn't have an option to choose the alsa device. How do you do this in the asound.conf?>>>> Thanks for the help so far, this list is pretty much my last hope.>>>> --Eric>>>> -----Original Message----->> From: Vedran Miletić [mailto:rivanvx@xxxxxxxxx]>> Sent: Friday, September 12, 2008 10:36 AM>> To: Eric T. Barnett>> Cc: alsa-user@xxxxxxxxxxxxxxxxxxxxx>> Subject: Re: [Alsa-user] Need SPDIF out asound.conf for CMI8768>>>> Try setting alsa device to plughw:0,2 or hw:0,2 when playing. Did it work?>>>> 2008/9/12 Eric T. Barnett <ebarnett@xxxxxxxxxx>:>>> Sure!>>>>>> Here's my aplay -l>>>>>> card 0: CMI8768 [C-Media CMI8768], device 0: CMI8738-MC8 [C-Media PCI DAC/ADC]>>> Subdevices: 1/1>>> Subdevice #0: subdevice #0>>> card 0: CMI8768 [C-Media CMI8768], device 1: CMI8738-MC8 [C-Media PCI 2nd DAC]>>> Subdevices: 1/1>>> Subdevice #0: subdevice #0>>> card 0: CMI8768 [C-Media CMI8768], device 2: CMI8738-MC8 [C-Media PCI IEC958]>>> Subdevices: 1/1>>> Subdevice #0: subdevice #0>>>>>> -----Original Message----->>> From: Vedran Miletić [mailto:rivanvx@xxxxxxxxx]>>> Sent: Friday, September 12, 2008 10:06 AM>>> To: Eric T. Barnett>>> Cc: alsa-user@xxxxxxxxxxxxxxxxxxxxx>>> Subject: Re: [Alsa-user] Need SPDIF out asound.conf for CMI8768>>>>>> Can you post output of "aplay -l"?>>>>>> 2008/9/12 Eric T. Barnett <ebarnett@xxxxxxxxxx>:>>>> Nope. Didn't work. Even tried pcm.!default iec958>>>>>>>>>>>>>>>> Does anyone on the list have a Diamond xtreme 7.1? or this chipset?>>>>>>>>>>>>>>>> Thanks,>>>>>>>> Eric>>>>>>>>>>>>>>>> -----Original Message----->>>>>>>> From: alsa-user-bounces@xxxxxxxxxxxxxxxxxxxxx on behalf of Floris>>>>>>>> Sent: Wed 9/10/2008 7:48 AM>>>>>>>> To: alsa-user@xxxxxxxxxxxxxxxxxxxxx>>>>>>>> Subject: Re: [Alsa-user] Need SPDIF out asound.conf for CMI8768>>>>>>>>>>>>>>>> Hey Eric,>>>>>>>>>>>>>>>> here is the solution I use with the Audigy 2 ZS sound card:>>>>>>>> In ~/.asoundrc or asound.conf write only this line>>>>>>>>>>>>>>>> pcm.!default spdif>>>>>>>>>>>>>>>> restart Alsa>>>>>>>> Now all the "default sounds" will go to the spdif output.>>>>>>>> hope this will fix your problem>>>>>>>>>>>>>>>> Floris>>>>>>>>>>>>>>>>>>>>>>>> Eric T. Barnett schreef:>>>>>>>>>>>>>>>>>> Hi folks,>>>>>>>>>>>>>>>>>> I'm new to the list and relatively new to Linux. I've been everywhere>>>>>>>>> and I can't get a straight (or working) answer for something that is>>>>>>>>> about to drive me nuts!>>>>>>>>>>>>>>>>>> I'm running the newest version of Knoppmyth. I'm using a Diamond>>>>>>>>> XtremeSound 7.1 card that has the CMI8768 chipset. I can get the SPDIF>>>>>>>>> out working for any program that will allow me to specifically direct>>>>>>>>> the sound to the IEC port. However, I cannot get the sound to work on>>>>>>>>> programs that do not have this capability and run off of the DEFAULT.>>>>>>>>> Obviously, I've got something hosed with my asound.conf. I just can't>>>>>>>>> figure out what!! HELP!! I've been working on this for weeks.>>>>>>>>>>>>>>>>>> The aplay -l command gives me that the IEC958 port is on card 0 device>>>>>>>>> 2. Can someone give me a config that they have working on their>>>>>>>>> machine? I've got this question floating around in about 3 forums now,>>>>>>>>> so I thought I'd go straight to the source.>>>>>>>>>>>>>>>>>> Many thanks in advance,>>>>>>>>>>>>>>>>>> Eric>>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------->>>>>>>>> -->>>>>>>>>>>>>>>>>> ---------------------------------------------------------------------->>>>>>>>> --- This SF.Net email is sponsored by the Moblin Your Move Developer's>>>>>>>>> challenge Build the coolest Linux based applications with Moblin SDK &>>>>>>>>> win great prizes Grand prize is a trip for two to an Open Source event>>>>>>>>> anywhere in the world>>>>>>>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/>>>>>>>>> ---------------------------------------------------------------------->>>>>>>>> -->>>>>>>>>>>>>>>>>> _______________________________________________>>>>>>>>> Alsa-user mailing list>>>>>>>>> Alsa-user@xxxxxxxxxxxxxxxxxxxxx>>>>>>>>> https://lists.sourceforge.net/lists/listinfo/alsa-user>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------->>>>>>>> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge>>>> Build the coolest Linux based applications with Moblin SDK & win great>>>> prizes Grand prize is a trip for two to an Open Source event anywhere in the>>>> world http://moblin-contest.org/redirect.php?banner_id=100&url=/>>>>>>>> _______________________________________________>>>>>>>> Alsa-user mailing list>>>>>>>> Alsa-user@xxxxxxxxxxxxxxxxxxxxx>>>>>>>> https://lists.sourceforge.net/lists/listinfo/alsa-user>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------->>>> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge>>>> Build the coolest Linux based applications with Moblin SDK & win great>>>> prizes>>>> Grand prize is a trip for two to an Open Source event anywhere in the world>>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/>>>> _______________________________________________>>>> Alsa-user mailing list>>>> Alsa-user@xxxxxxxxxxxxxxxxxxxxx>>>> https://lists.sourceforge.net/lists/listinfo/alsa-user>>>>>>>>>>>>>>>>>>>> -->>> Vedran Miletić>>> ------------------------------------------------------------------------->>> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge>>> Build the coolest Linux based applications with Moblin SDK & win great prizes>>> Grand prize is a trip for two to an Open Source event anywhere in the world>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/>>> _______________________________________________>>> Alsa-user mailing list>>> Alsa-user@xxxxxxxxxxxxxxxxxxxxx>>> https://lists.sourceforge.net/lists/listinfo/alsa-user>>>>>>>>>>> -->> Vedran Miletić>>>>>> --> Vedran Miletić> -- Vedran Miletić-------------------------------------------------------------------------This SF.Net email is sponsored by the Moblin Your Move Developer's challengeBuild the coolest Linux based applications with Moblin SDK & win great prizesGrand prize is a trip for two to an Open Source event anywhere in the worldhttp://moblin-contest.org/redirect.php?banner_id=100&url=/_______________________________________________Alsa-user mailing listAlsa-user@xxxxxxxxxxxxxxxxxxxxxxxxxx://lists.sourceforge.net/lists/listinfo/alsa-user
