Try setting alsa device to plughw:0,2 or hw:0,2 when playing. Did it work? 2008/9/12 Eric T. Barnett <ebarnett@xxxxxxxxxx>:> Sure!>> Here's my aplay -l>> card 0: CMI8768 [C-Media CMI8768], device 0: CMI8738-MC8 [C-Media PCI DAC/ADC]> Subdevices: 1/1> Subdevice #0: subdevice #0> card 0: CMI8768 [C-Media CMI8768], device 1: CMI8738-MC8 [C-Media PCI 2nd DAC]> Subdevices: 1/1> Subdevice #0: subdevice #0> card 0: CMI8768 [C-Media CMI8768], device 2: CMI8738-MC8 [C-Media PCI IEC958]> Subdevices: 1/1> Subdevice #0: subdevice #0>> -----Original Message-----> From: Vedran Miletić [mailto:rivanvx@xxxxxxxxx]> Sent: Friday, September 12, 2008 10:06 AM> To: Eric T. Barnett> Cc: alsa-user@xxxxxxxxxxxxxxxxxxxxx> Subject: Re: Need SPDIF out asound.conf for CMI8768>> Can you post output of "aplay -l"?>> 2008/9/12 Eric T. Barnett <ebarnett@xxxxxxxxxx>:>> Nope. Didn't work. Even tried pcm.!default iec958>>>>>>>> Does anyone on the list have a Diamond xtreme 7.1? or this chipset?>>>>>>>> Thanks,>>>> Eric>>>>>>>> -----Original Message----->>>> From: alsa-user-bounces@xxxxxxxxxxxxxxxxxxxxx on behalf of Floris>>>> Sent: Wed 9/10/2008 7:48 AM>>>> To: alsa-user@xxxxxxxxxxxxxxxxxxxxx>>>> Subject: Re: [Alsa-user] Need SPDIF out asound.conf for CMI8768>>>>>>>> Hey Eric,>>>>>>>> here is the solution I use with the Audigy 2 ZS sound card:>>>> In ~/.asoundrc or asound.conf write only this line>>>>>>>> pcm.!default spdif>>>>>>>> restart Alsa>>>> Now all the "default sounds" will go to the spdif output.>>>> hope this will fix your problem>>>>>>>> Floris>>>>>>>>>>>> Eric T. Barnett schreef:>>>>>>>>>> Hi folks,>>>>>>>>>> I'm new to the list and relatively new to Linux. I've been everywhere>>>>> and I can't get a straight (or working) answer for something that is>>>>> about to drive me nuts!>>>>>>>>>> I'm running the newest version of Knoppmyth. I'm using a Diamond>>>>> XtremeSound 7.1 card that has the CMI8768 chipset. I can get the SPDIF>>>>> out working for any program that will allow me to specifically direct>>>>> the sound to the IEC port. However, I cannot get the sound to work on>>>>> programs that do not have this capability and run off of the DEFAULT.>>>>> Obviously, I've got something hosed with my asound.conf. I just can't>>>>> figure out what!! HELP!! I've been working on this for weeks.>>>>>>>>>> The aplay -l command gives me that the IEC958 port is on card 0 device>>>>> 2. Can someone give me a config that they have working on their>>>>> machine? I've got this question floating around in about 3 forums now,>>>>> so I thought I'd go straight to the source.>>>>>>>>>> Many thanks in advance,>>>>>>>>>> Eric>>>>>>>>>> ---------------------------------------------------------------------->>>>> -->>>>>>>>>> ---------------------------------------------------------------------->>>>> --- This SF.Net email is sponsored by the Moblin Your Move Developer's>>>>> challenge Build the coolest Linux based applications with Moblin SDK &>>>>> win great prizes Grand prize is a trip for two to an Open Source event>>>>> anywhere in the world>>>>> http://moblin-contest.org/redirect.php?banner_id=100&url=/>>>>> ---------------------------------------------------------------------->>>>> -->>>>>>>>>> _______________________________________________>>>>> Alsa-user mailing list>>>>> Alsa-user@xxxxxxxxxxxxxxxxxxxxx>>>>> https://lists.sourceforge.net/lists/listinfo/alsa-user>>>>>>>>>>>>>>>>> ------------------------------------------------------------------------->>>> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge>> Build the coolest Linux based applications with Moblin SDK & win great>> prizes Grand prize is a trip for two to an Open Source event anywhere in the>> world http://moblin-contest.org/redirect.php?banner_id=100&url=/>>>> _______________________________________________>>>> Alsa-user mailing list>>>> Alsa-user@xxxxxxxxxxxxxxxxxxxxx>>>> https://lists.sourceforge.net/lists/listinfo/alsa-user>>>>>>>>>>>>>>>> ------------------------------------------------------------------------->> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge>> Build the coolest Linux based applications with Moblin SDK & win great>> prizes>> Grand prize is a trip for two to an Open Source event anywhere in the world>> http://moblin-contest.org/redirect.php?banner_id=100&url=/>> _______________________________________________>> Alsa-user mailing list>> Alsa-user@xxxxxxxxxxxxxxxxxxxxx>> https://lists.sourceforge.net/lists/listinfo/alsa-user>>>>>>>> --> Vedran Miletić> -------------------------------------------------------------------------> This SF.Net email is sponsored by the Moblin Your Move Developer's challenge> Build the coolest Linux based applications with Moblin SDK & win great prizes> Grand prize is a trip for two to an Open Source event anywhere in the world> http://moblin-contest.org/redirect.php?banner_id=100&url=/> _______________________________________________> Alsa-user mailing list> Alsa-user@xxxxxxxxxxxxxxxxxxxxx> https://lists.sourceforge.net/lists/listinfo/alsa-user> -- Vedran Miletić-------------------------------------------------------------------------This SF.Net email is sponsored by the Moblin Your Move Developer's challengeBuild the coolest Linux based applications with Moblin SDK & win great prizesGrand prize is a trip for two to an Open Source event anywhere in the worldhttp://moblin-contest.org/redirect.php?banner_id=100&url=/_______________________________________________Alsa-user mailing listAlsa-user@xxxxxxxxxxxxxxxxxxxxxxxxxx://lists.sourceforge.net/lists/listinfo/alsa-user
