Sure! Here's my aplay -l card 0: CMI8768 [C-Media CMI8768], device 0: CMI8738-MC8 [C-Media PCI DAC/ADC] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: CMI8768 [C-Media CMI8768], device 1: CMI8738-MC8 [C-Media PCI 2nd DAC] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: CMI8768 [C-Media CMI8768], device 2: CMI8738-MC8 [C-Media PCI IEC958] Subdevices: 1/1 Subdevice #0: subdevice #0 -----Original Message----- From: Vedran Miletić [mailto:rivanvx@xxxxxxxxx] Sent: Friday, September 12, 2008 10:06 AM To: Eric T. Barnett Cc: alsa-user@xxxxxxxxxxxxxxxxxxxxx Subject: Re: Need SPDIF out asound.conf for CMI8768 Can you post output of "aplay -l"? 2008/9/12 Eric T. Barnett <ebarnett@xxxxxxxxxx>: > Nope. Didn't work. Even tried pcm.!default iec958 > > > > Does anyone on the list have a Diamond xtreme 7.1? or this chipset? > > > > Thanks, > > Eric > > > > -----Original Message----- > > From: alsa-user-bounces@xxxxxxxxxxxxxxxxxxxxx on behalf of Floris > > Sent: Wed 9/10/2008 7:48 AM > > To: alsa-user@xxxxxxxxxxxxxxxxxxxxx > > Subject: Re: Need SPDIF out asound.conf for CMI8768 > > > > Hey Eric, > > > > here is the solution I use with the Audigy 2 ZS sound card: > > In ~/.asoundrc or asound.conf write only this line > > > > pcm.!default spdif > > > > restart Alsa > > Now all the "default sounds" will go to the spdif output. > > hope this will fix your problem > > > > Floris > > > > > > Eric T. Barnett schreef: > >> > >> Hi folks, > >> > >> I'm new to the list and relatively new to Linux. I've been everywhere > >> and I can't get a straight (or working) answer for something that is > >> about to drive me nuts! > >> > >> I'm running the newest version of Knoppmyth. I'm using a Diamond > >> XtremeSound 7.1 card that has the CMI8768 chipset. I can get the SPDIF > >> out working for any program that will allow me to specifically direct > >> the sound to the IEC port. However, I cannot get the sound to work on > >> programs that do not have this capability and run off of the DEFAULT. > >> Obviously, I've got something hosed with my asound.conf. I just can't > >> figure out what!! HELP!! I've been working on this for weeks. > >> > >> The aplay -l command gives me that the IEC958 port is on card 0 device > >> 2. Can someone give me a config that they have working on their > >> machine? I've got this question floating around in about 3 forums now, > >> so I thought I'd go straight to the source. > >> > >> Many thanks in advance, > >> > >> Eric > >> > >> ---------------------------------------------------------------------- > >> -- > >> > >> ---------------------------------------------------------------------- > >> --- This SF.Net email is sponsored by the Moblin Your Move Developer's > >> challenge Build the coolest Linux based applications with Moblin SDK & > >> win great prizes Grand prize is a trip for two to an Open Source event > >> anywhere in the world > >> http://moblin-contest.org/redirect.php?banner_id=100&url=/ > >> ---------------------------------------------------------------------- > >> -- > >> > >> _______________________________________________ > >> Alsa-user mailing list > >> Alsa-user@xxxxxxxxxxxxxxxxxxxxx > >> https://lists.sourceforge.net/lists/listinfo/alsa-user > >> > > > > > > ------------------------------------------------------------------------- > > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great > prizes Grand prize is a trip for two to an Open Source event anywhere in the > world http://moblin-contest.org/redirect.php?banner_id=100&url=/ > > _______________________________________________ > > Alsa-user mailing list > > Alsa-user@xxxxxxxxxxxxxxxxxxxxx > > https://lists.sourceforge.net/lists/listinfo/alsa-user > > > > > > > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great > prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Alsa-user mailing list > Alsa-user@xxxxxxxxxxxxxxxxxxxxx > https://lists.sourceforge.net/lists/listinfo/alsa-user > > -- Vedran Miletić -------------------------------------------------------------------------This SF.Net email is sponsored by the Moblin Your Move Developer's challengeBuild the coolest Linux based applications with Moblin SDK & win great prizesGrand prize is a trip for two to an Open Source event anywhere in the worldhttp://moblin-contest.org/redirect.php?banner_id=100&url=/_______________________________________________Alsa-user mailing listAlsa-user@xxxxxxxxxxxxxxxxxxxxxxxxxx://lists.sourceforge.net/lists/listinfo/alsa-user
