We're using a XFree86 Version 4.2.0 on a new board using a LynxEM+ 712 chip and a 640X480 DSTN LCD. I'm using the silicon motion driver II) Silicon Motion: driver (version 1.3.1) for Silicon Motion Lynx chipsets: Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM It correctly loads, identifies the chip and starts X with the following options. (==) Silicon Motion(0): Depth 8, (==) framebuffer bpp 8 (==) Silicon Motion(0): Default visual is PseudoColor (**) Silicon Motion(0): Option "NoAccel" "true" (**) Silicon Motion(0): Option "UseBIOS" "true" (**) Silicon Motion(0): Option "ZoomOnLCD" (**) Silicon Motion(0): Option: NoAccel - Acceleration disabled (==) Silicon Motion(0): Using Hardware Cursor (**) Silicon Motion(0): Option: UseBIOS enabled. (**) Silicon Motion(0): Option: ZoomOnLCD enabled. With these options X starts, but probing through the log I found this Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) Silicon Motion(0): initializing int10 (WW) Silicon Motion(0): Bad V_BIOS checksum (II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000 (II) Silicon Motion(0): VESA BIOS detected (II) Silicon Motion(0): VESA VBE Version 2.0 (II) Silicon Motion(0): VESA VBE Total Mem: 1920 kB (II) Silicon Motion(0): VESA VBE OEM: Silicon Motion SM712 VGA BIOS (II) Silicon Motion(0): VESA VBE OEM Software Rev: 2.0 (II) Silicon Motion(0): VESA VBE OEM Vendor: SM712 (II) Silicon Motion(0): VESA VBE OEM Product: SM712 (II) Silicon Motion(0): VESA VBE OEM Product Rev: SM712 (II) Silicon Motion(0): Setting mode 0x50 (EE) Silicon Motion(0): unknown reason for exception (II) Silicon Motion(0): EAX=0x00007f14, EBX=0x00000000, ECX=0x00000000, EDX=0x000003d4 (II) Silicon Motion(0): ESP=0x00000f96, EBP=0x00000fd0, ESI=0x000013d7, EDI=0x00000110 (II) Silicon Motion(0): CS=0x97a6, SS=0x0100, DS=0x0044, ES=0x0044, FS=0x0000, GS=0x0000 (II) Silicon Motion(0): EIP=0x0000ffff, EFLAGS=0x00033282 (II) stack at 0x00001f96: 9e 04 00 c0 06 32 d4 03 00 00 33 00 b1 6a d7 13 9c 0f 7e 0e c4 03 21 20 10 01 ae 0d d0 0f be 0f 03 00 c4 03 00 00 31 03 3f 88 c9 12 e0 23 46 32 00 08 44 00 08 50 01 03 d4 03 d2 0f 00 20 00 00 00 00 e2 0f 00 00 00 00 00 00 d0 00 00 00 40 00 f7 0c 00 00 00 00 00 00 f8 0f 00 00 00 00 00 00 00 00 16 00 00 06 00 00 00 32 (II) Silicon Motion(0): code at 0x000a7a5f: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (EE) Silicon Motion(0): cannot continue I'm thinking this has to do with the BIOS, but I'm not sure. The LCD comes up displaying X, but looks grainy, and many of it's pixels appear to be "floating" like they're liquid. When the "BlankTime" option expires, the screen turns black. When I hit a key to return it does and LCD looks fine, it no longer has any problems after that. What could cause that? I have tried changing the "UseBIOS" option to "false", but then the LCD comes up foggy, like it's contrast is way off. Neither the board, BIOS, or the kernel are configured for power management. Any ideas are appreciated. Also if someone could tell me an easy way to change the verbosity of X it would help. Plus can anyone point me towards a tutorial of how to compile the XFree project? I would like to monkey with the drivers but can't figure out the make scheme. The entire XFree log is pasted below. thx, NZG. XFree86 Version 4.2.0 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 18 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.18-rubberducky i686 [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/XFree86.0.log", Time: Sat Jan 26 10:35:30 1980 (==) Using config file: "/usr/X11R6/lib/X11/XF86Config-4" (==) ServerLayout "XFree86 Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "Card0" (**) |-->Input Device "Mouse0" (**) |-->Input Device "touch0" (**) |-->Input Device "Keyboard0" (==) Keyboard: CustomKeycode disabled (WW) The directory "/usr/X11R6/lib/X11/fonts/Speedo/" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/Type1/" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/CID/" does not exist. Entry deleted from font path. (WW) The directory "/usr/X11R6/lib/X11/fonts/100dpi/" does not exist. Entry deleted from font path. (**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (**) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "BlankTime" "1" (**) Option "StandbyTime" "2" (**) Option "SuspendTime" "3" (**) Option "OffTime" "4" (--) using VT number 4 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 1022,3000 card 0000,0000 rev 00 class 06,00,00 hdr 00 (II) PCI: 00:10:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00 (II) PCI: 00:13:0: chip 126f,0712 card 126f,0712 rev a0 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (--) PCI:*(0:19:0) Silicon Motion Inc. LynxEM+ rev 160, Mem @ 0xc1000000/24 (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0xc0000000 - 0xc00000ff (0x100) MX[B] [1] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [2] -1 0x0000fc00 - 0x0000fcff (0x100) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0xc0000000 - 0xc00000ff (0x100) MX[B] [1] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [2] -1 0x0000fc00 - 0x0000fcff (0x100) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xc0000000 - 0xc00000ff (0x100) MX[B] [6] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0x00000000 - 0x000000ff (0x100) IX[B] [9] -1 0x0000fc00 - 0x0000fcff (0x100) IX[B] (II) LoadModule: "siliconmotion" (II) Loading /usr/X11R6/lib/modules/drivers/siliconmotion_drv.o (II) Module siliconmotion: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.3.1 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.5 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.3 (II) LoadModule: "tsharc" (II) Loading /usr/X11R6/lib/modules/input/tsharc_drv.o (II) Module tsharc: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.2 (II) Silicon Motion: driver (version 1.3.1) for Silicon Motion Lynx chipsets: Lynx, LynxE, Lynx3D, LynxEM, LynxEM+, Lynx3DM (II) Primary Device is: PCI 00:13:0 (--) Assigning device section with no busID to primary device (--) Chipset LynxEM+ found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xc0000000 - 0xc00000ff (0x100) MX[B] [6] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [7] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [8] -1 0x00000000 - 0x000000ff (0x100) IX[B] [9] -1 0x0000fc00 - 0x0000fcff (0x100) IX[B] (II) resource ranges after probing: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xc0000000 - 0xc00000ff (0x100) MX[B] [6] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [7] 0 0x000a0000 - 0x000affff (0x10000) MS[B] [8] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [9] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0x0000fc00 - 0x0000fcff (0x100) IX[B] [13] 0 0x000003b0 - 0x000003bb (0xc) IS[B] [14] 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (==) Silicon Motion(0): Depth 8, (==) framebuffer bpp 8 (==) Silicon Motion(0): Default visual is PseudoColor (**) Silicon Motion(0): Option "NoAccel" "true" (**) Silicon Motion(0): Option "UseBIOS" "true" (**) Silicon Motion(0): Option "ZoomOnLCD" (**) Silicon Motion(0): Option: NoAccel - Acceleration disabled (==) Silicon Motion(0): Using Hardware Cursor (**) Silicon Motion(0): Option: UseBIOS enabled. (**) Silicon Motion(0): Option: ZoomOnLCD enabled. (II) Loading sub module "vbe" (II) LoadModule: "vbe" (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) Silicon Motion(0): initializing int10 (WW) Silicon Motion(0): Bad V_BIOS checksum (II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000 (II) Silicon Motion(0): VESA BIOS detected (II) Silicon Motion(0): VESA VBE Version 2.0 (II) Silicon Motion(0): VESA VBE Total Mem: 1920 kB (II) Silicon Motion(0): VESA VBE OEM: Silicon Motion SM712 VGA BIOS (II) Silicon Motion(0): VESA VBE OEM Software Rev: 2.0 (II) Silicon Motion(0): VESA VBE OEM Vendor: SM712 (II) Silicon Motion(0): VESA VBE OEM Product: SM712 (II) Silicon Motion(0): VESA VBE OEM Product Rev: SM712 (--) Silicon Motion(0): Chipset: "LynxEM+" (WW) System lacks support for changing MTRRs (II) Silicon Motion(0): Cursor Offset: FFFFFC00 Reserved: 001E0000 (II) Silicon Motion(0): DSTN Panel Size = 640x480 (II) Silicon Motion(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.5 (II) Silicon Motion(0): I2C bus "I2C bus" initialized. (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Reloading /usr/X11R6/lib/modules/libddc.a (II) Silicon Motion(0): VESA VBE DDC supported (II) Silicon Motion(0): VESA VBE DDC Level 2 (II) Silicon Motion(0): VESA VBE DDC transfer in appr. 10 sec. (II) Silicon Motion(0): VESA VBE DDC read successfully (II) Silicon Motion(0): Manufacturer: DEL Model: 2430 Serial#: 810235470 (II) Silicon Motion(0): Year: 1995 Week: 39 (II) Silicon Motion(0): EDID Version: 1.0 (II) Silicon Motion(0): Analog Display Input, Input Voltage Level: 0.714/0.286 V (II) Silicon Motion(0): Sync: Separate Composite SyncOnGreen (II) Silicon Motion(0): Max H-Image Size [cm]: horiz.: 31 vert.: 23 (II) Silicon Motion(0): Gamma: 2.13 (II) Silicon Motion(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) Silicon Motion(0): redX: 0.625 redY: 0.340 greenX: 0.274 greenY: 0.604 (II) Silicon Motion(0): blueX: 0.149 blueY: 0.064 whiteX: 0.282 whiteY: 0.298 (II) Silicon Motion(0): Supported VESA Video Modes: (II) Silicon Motion(0): 720x400@70Hz (II) Silicon Motion(0): 720x400@88Hz (II) Silicon Motion(0): 640x480@60Hz (II) Silicon Motion(0): 640x480@67Hz (II) Silicon Motion(0): 640x480@72Hz (II) Silicon Motion(0): 640x480@75Hz (II) Silicon Motion(0): 800x600@56Hz (II) Silicon Motion(0): 800x600@60Hz (II) Silicon Motion(0): 800x600@72Hz (II) Silicon Motion(0): 800x600@75Hz (II) Silicon Motion(0): 832x624@75Hz (II) Silicon Motion(0): 1024x768@87Hz (interlaced) (II) Silicon Motion(0): 1024x768@60Hz (II) Silicon Motion(0): 1024x768@70Hz (II) Silicon Motion(0): 1024x768@75Hz (II) Silicon Motion(0): Manufacturer's mask: 0 (==) Silicon Motion(0): Using gamma correction (1.0, 1.0, 1.0) (--) Silicon Motion(0): videoram: 2048kB (--) Silicon Motion(0): Detected current MCLK value of 128.864 MHz (WW) Silicon Motion(0): Monitor0: Using default hsync range of 28.00-33.00kHz (WW) Silicon Motion(0): Monitor0: using default vrefresh range of 43.00-72.00Hz (II) Silicon Motion(0): Clock range: 20.00 to 135.00 MHz (II) Silicon Motion(0): Mode: 640x350 8-bpp, 85.079948Hz (II) Silicon Motion(0): Not using default mode "640x350" (hsync out of range) (II) Silicon Motion(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 640x400 8-bpp, 85.079948Hz (II) Silicon Motion(0): Not using default mode "640x400" (hsync out of range) (II) Silicon Motion(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 720x400 8-bpp, 85.038902Hz (II) Silicon Motion(0): Not using default mode "720x400" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 640x480 8-bpp, 60.000000Hz (II) Silicon Motion(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 640x480 8-bpp, 72.808800Hz (II) Silicon Motion(0): Not using default mode "640x480" (hsync out of range) (II) Silicon Motion(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 640x480 8-bpp, 75.000000Hz (II) Silicon Motion(0): Not using default mode "640x480" (hsync out of range) (II) Silicon Motion(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 640x480 8-bpp, 85.008308Hz (II) Silicon Motion(0): Not using default mode "640x480" (hsync out of range) (II) Silicon Motion(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 800x600 8-bpp, 56.250000Hz (II) Silicon Motion(0): Not using default mode "800x600" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 800x600 8-bpp, 60.316540Hz (II) Silicon Motion(0): Not using default mode "800x600" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 800x600 8-bpp, 72.187569Hz (II) Silicon Motion(0): Not using default mode "800x600" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 800x600 8-bpp, 75.000000Hz (II) Silicon Motion(0): Not using default mode "800x600" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 800x600 8-bpp, 85.136887Hz (II) Silicon Motion(0): Not using default mode "800x600" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1024x768 8-bpp, 60.003841Hz (II) Silicon Motion(0): Not using default mode "1024x768" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1024x768 8-bpp, 70.069359Hz (II) Silicon Motion(0): Not using default mode "1024x768" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1024x768 8-bpp, 75.076218Hz (II) Silicon Motion(0): Not using default mode "1024x768" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1024x768 8-bpp, 84.996689Hz (II) Silicon Motion(0): Not using default mode "1024x768" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1152x864 8-bpp, 75.000000Hz (II) Silicon Motion(0): Not using default mode "1152x864" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1280x960 8-bpp, 60.000000Hz (II) Silicon Motion(0): Not using default mode "1280x960" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1280x1024 8-bpp, 60.019741Hz (II) Silicon Motion(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1280x1024 8-bpp, 75.024673Hz (II) Silicon Motion(0): Not using default mode "1280x1024" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1792x1344" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1856x1392" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1920x1440" (insufficient memory for mode) (II) Silicon Motion(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 832x624 8-bpp, 74.551270Hz (II) Silicon Motion(0): Not using default mode "832x624" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1400x1050 8-bpp, 59.975616Hz (II) Silicon Motion(0): Not using default mode "1400x1050" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 1600x1024 8-bpp, 59.998093Hz (II) Silicon Motion(0): Not using default mode "1600x1024" (exceeds panel dimensions) (II) Silicon Motion(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan) (II) Silicon Motion(0): Mode: 640x480 8-bpp, 60.000000Hz (--) Silicon Motion(0): Virtual size is 640x480 (pitch 640) (**) Silicon Motion(0): Default mode "640x480": 25.2 MHz (scaled from 75.6 MHz), 31.5 kHz, 60.0 Hz (II) Silicon Motion(0): Modeline "640x480" 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (--) Silicon Motion(0): Display dimensions: (310, 230) mm (--) Silicon Motion(0): DPI set to (52, 53) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.1 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.2.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.5 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0xc1000000 - 0xc1ffffff (0x1000000) MX[B] [1] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [2] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [3] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [4] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [5] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [6] -1 0xc0000000 - 0xc00000ff (0x100) MX[B] [7] -1 0xc1000000 - 0xc1ffffff (0x1000000) MX[B](B) [8] 0 0x000a0000 - 0x000affff (0x10000) MS[B] [9] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [10] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [11] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [12] -1 0x00000000 - 0x000000ff (0x100) IX[B] [13] -1 0x0000fc00 - 0x0000fcff (0x100) IX[B] [14] 0 0x000003b0 - 0x000003bb (0xc) IS[B] [15] 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Silicon Motion(0): Cursor Offset: 001FFC00 Reserved: 001E0000 (II) Silicon Motion(0): DSTN Panel Size = 640x480 (II) Silicon Motion(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000 (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a (II) Silicon Motion(0): initializing int10 (WW) Silicon Motion(0): Bad V_BIOS checksum (II) Silicon Motion(0): Primary V_BIOS segment is: 0xc000 (II) Silicon Motion(0): VESA BIOS detected (II) Silicon Motion(0): VESA VBE Version 2.0 (II) Silicon Motion(0): VESA VBE Total Mem: 1920 kB (II) Silicon Motion(0): VESA VBE OEM: Silicon Motion SM712 VGA BIOS (II) Silicon Motion(0): VESA VBE OEM Software Rev: 2.0 (II) Silicon Motion(0): VESA VBE OEM Vendor: SM712 (II) Silicon Motion(0): VESA VBE OEM Product: SM712 (II) Silicon Motion(0): VESA VBE OEM Product Rev: SM712 (II) Silicon Motion(0): Setting mode 0x50 (EE) Silicon Motion(0): unknown reason for exception (II) Silicon Motion(0): EAX=0x00007f14, EBX=0x00000000, ECX=0x00000000, EDX=0x000003d4 (II) Silicon Motion(0): ESP=0x00000f96, EBP=0x00000fd0, ESI=0x000013d7, EDI=0x00000110 (II) Silicon Motion(0): CS=0x97a6, SS=0x0100, DS=0x0044, ES=0x0044, FS=0x0000, GS=0x0000 (II) Silicon Motion(0): EIP=0x0000ffff, EFLAGS=0x00033282 (II) stack at 0x00001f96: 9e 04 00 c0 06 32 d4 03 00 00 33 00 b1 6a d7 13 9c 0f 7e 0e c4 03 21 20 10 01 ae 0d d0 0f be 0f 03 00 c4 03 00 00 31 03 3f 88 c9 12 e0 23 46 32 00 08 44 00 08 50 01 03 d4 03 d2 0f 00 20 00 00 00 00 e2 0f 00 00 00 00 00 00 d0 00 00 00 40 00 f7 0c 00 00 00 00 00 00 f8 0f 00 00 00 00 00 00 00 00 16 00 00 06 00 00 00 32 (II) Silicon Motion(0): code at 0x000a7a5f: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 (EE) Silicon Motion(0): cannot continue (II) Silicon Motion(0): FrameBuffer Box: 0,0 - 640,3072 (**) Option "dpms" (**) Silicon Motion(0): DPMS enabled (II) Silicon Motion(0): I2C device "I2C bus:SAA 7111A" registered. (II) Setting vga for screen 0. (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (**) Option "Protocol" "PS/2" (**) Mouse0: Protocol: "PS/2" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/psaux" (==) Mouse0: Buttons: 3 (**) Option "Device" "/dev/ttyS3" (**) Option "BaudRate" "9600" (**) Option "StopBits" "1" (**) Option "DataBits" "8" (**) Option "Parity" "None" (**) Option "Vmin" "1" (**) Option "Vtime" "0" (**) Option "FlowControl" "None" (**) Option "TSHARCType" "12" (**) Option "TSHARCBaud" "9600" (**) Option "TSHARCPS2" "0" (**) Option "TSHARCBUS" "0" (**) Option "ScreenNumber" "0" (**) Option "ButtonNumber" "1" (**) Option "AlwaysCore" (**) TSHARC: always reports core events (II) Keyboard "Keyboard0" handled by legacy driver (II) XINPUT: Adding extended input device "TSHARC" (type: TOUCHSCREEN) (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) Couldn't load XKB keymap, falling back to pre-XKB keymap AUDIT: Sat Jan 26 10:35:55 1980: 450 X: client 6 rejected from local host (II) Silicon Motion(0): I2C device "I2C bus:SAA 7111A" removed. (II) Silicon Motion(0): I2C bus "I2C bus" removed. _______________________________________________ XFree86 mailing list XFree86@xxxxxxxxxxx http://XFree86.Org/mailman/listinfo/xfree86
