thank you for your help...
But I believe that problem isn't the file configuration
I was looking for info in the web and appear that my touchscreen
has an old controler and because of this doesn't work...
I proved in a PC with windows 98 SE and doesn't work either.
I proved under MS-dos somethings that I found in the web page Elo
to know if controler is new or old.. and the result say me that
my controler of touchscreen is OLD... and because of this doesn't work...
thank you for the attention lent....
_____________________________________________________________
preHackers.com
(Seguridad Informática e Internet)
http://www.prehackers.com
_____________________________________________________________
Select your own custom email address for FREE! Get you@yourchoice.com w/No Ads, 6MB, POP & more! http://www.everyone.net/selectmail?campaign=tag
--- Begin Message ---
Hi Edwin,
I have attached a copy of my XF86Config-4 that works for me. I am using
/dev/ttyS0 for the touchscreen input.
Hope this helps
rahul
Edwin Valencia wrote:
Hi...
I have a Elographics touchscreen Monitor (CRT)...
I follow the steps describe in his (www.elotouch.com/support/linux.asp) web page but I can't get that it works...
Anyone did configure a touchscreen monitor under Redhat 7.3...
Please help me....
thank you for the attention lent..
_____________________________________________________________
preHackers.com
(Seguridad Informática e Internet)
http://www.prehackers.com
_____________________________________________________________
Select your own custom email address for FREE! Get you@yourchoice.com w/No Ads, 6MB, POP & more! http://www.everyone.net/selectmail?campaign=tag
_______________________________________________
Newbie@XFree86.Org
*** To unsubscribe , or change message options, see:
http://XFree86.Org/mailman/listinfo/newbie
# XFree86 4.2.0 configuration generated by Xconfigurator 4.10.7
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "touchscreen1" "SendCoreEvents"
EndSection
# Red Hat Linux 6.0 and later use the xfs font server for improved
# interactive performance
Section "Files"
FontPath "unix/:7100"
EndSection
# Module loading section
Section "Module"
Load "dbe" # Double-buffering
Load "GLcore" # OpenGL support
Load "dri" # Direct rendering infrastructure
Load "glx" # OpenGL X protocol interface
Load "extmod" # Misc. required extensions
Load "v4l" # Video4Linux
# Load "record" # X event recorder
# You only need the following two modules if you do not use xfs.
# Load "freetype" # TrueType font handler
# Load "type1" # Adobe Type 1 font handler
#Load "xf86Elo.so" # For the touch screen
EndSection
Section "InputDevice"
Identifier "touchscreen1"
Driver "elographics"
Option "Device" "/dev/ttyS0"
Option "AlwaysCore"
Option "MinX" "3630"
Option "MaxX" "550"
Option "MinY" "3500"
Option "MaxY" "500"
Option "UntouchDelay" "3"
Option "ReportDelay" "1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "on"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "CustomConfiguration"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30-60
VertRefresh 50-75
Option "dpms"
EndSection
Section "Device"
Identifier "Chips & Technologies CT69000"
Driver "chips"
BoardName "Unknown"
Option "noaccel"
Option "no_bitblt"
# Option "xaa_no_color_exp"
# Option "xaa_benchmark"
Option "sw_cursor"
# Option "sync_on_green"
# Option "fast_dram"
# Option "use_vclk1"
# Textclockfreq 25.175
# Option "nolinear"
# MemBase 0x03b00000
# Device section for C&T cards.
# Option "suspend_hack"
# Option "STN"
# Option "no_stretch"
# Option "no_center"
#Option "use_modeline"
Option "fix_panel_size"
# videoram 512
EndSection
Section "Device"
Identifier "Linux Frame Buffer"
Driver "fbdev"
BoardName "Unknown"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Chips & Technologies CT69000"
Monitor "CustomConfiguration"
DefaultDepth 16
Subsection "Display"
Depth 16
Modes "1024x768" "800x600"
# Option "Rotate" "CW"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
--- End Message ---
