|
Hello everybody outthere using XFree ;),
I've got some problems with XFree86 3.3.2.3 on my Compaq
Armada 1530D. I installed the RedHat 5.2 distribution on this machine and tried
to configure the X-Server with "xf86config". You can find
my "XF86Config"-File below. After starting the X-Server it works with a
resolution of 320x200 pixels. I can't change the resolution by pressing
ALT+CTRL+"+". If i use the RedHat-tool "Xconfigurator" there is a higher
resolution, but I couldn't see anything on the screen because of flickering :(.
I believe that this is why I don't know the exact vertical and horizontal
frequences of my tft-display. I wrote a mail to the hp/compaq support, but they
didn't answer.
Does anybody have an idea or a tip for me to fix my problem? Thanks for any response ;). Sincerely,
Jan-Christian Krause
My XF86Config:
# File generated by xf86config.
#
# Copyright (c) 1995 by The XFree86 Project, Inc. # # Permission is hereby granted, free of charge, to any person obtaining a # copy of this software and associated documentation files (the "Software"), # to deal in the Software without restriction, including without limitation # the rights to use, copy, modify, merge, publish, distribute, sublicense, # and/or sell copies of the Software, and to permit persons to whom the # Software is furnished to do so, subject to the following conditions: # # The above copyright notice and this permission notice shall be included in # all copies or substantial portions of the Software. # # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL # THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE # SOFTWARE. # # Except as contained in this notice, the name of the XFree86 Project shall # not be used in advertising or otherwise to promote the sale, use or other # dealings in this Software without prior written authorization from the # XFree86 Project. # #
**********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of # this file. # ********************************************************************** #
**********************************************************************
# Files section. This allows default font and rgb paths to be set # ********************************************************************** Section "Files"
# The location of the RGB database. Note, this is the
name of the
# file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default.
RgbPath "/usr/X11R6/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are
concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath # command (or a combination of both methods) # # If you don't have a floating point coprocessor and emacs, Mosaic or other # programs take long to start up, try moving the Type1 and Speedo directory # to the end of this list (or comment them out). # FontPath
"/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/Type1/" FontPath "/usr/X11R6/lib/X11/fonts/Speedo/" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/" # FontPath "/usr/X11R6/lib/X11/fonts/100dpi/" # For OSs that support Dynamically loaded modules, ModulePath
can be
# used to set a search path for the modules. This is currently supported # for Linux ELF, FreeBSD 2.x and NetBSD 1.x. The default path is shown # here. # ModulePath
"/usr/X11R6/lib/modules"
EndSection
#
**********************************************************************
# Module section -- this is an optional section which is used to specify # which dynamically loadable modules to load. Dynamically loadable # modules are currently supported only for Linux ELF, FreeBSD 2.x # and NetBSD 1.x. Currently, dynamically loadable modules are used # only for some extended input (XInput) device drivers. # ********************************************************************** # # Section "Module" # # This loads the module for the Joystick driver # # Load "xf86Jstk.so" # # EndSection #
**********************************************************************
# Server flags section. # ********************************************************************** Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a
signal is
# received. This may leave the console in an unusable state, but may # provide a better stack trace in the core dump to aid in debugging # NoTrapSignals
# Uncomment this to disable the
<Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event. # DontZap
# Uncomment this to disable the
<Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events. # DontZoom
# Uncomment this to disable tuning with the xvidtune client.
With
# it the client can still run and fetch card and monitor attributes, # but it will not be allowed to change them. If it tries it will # receive a protocol error. #
DisableVidModeExtension
# Uncomment this to enable the use of a non-local xvidtune
client.
#
AllowNonLocalXvidtune
# Uncomment this to disable dynamically modifying the input
device
# (mouse and keyboard) settings. #
DisableModInDev
# Uncomment this to enable the use of a non-local client
to
# change the keyboard or mouse settings (currently only xset). #
AllowNonLocalModInDev
EndSection
#
**********************************************************************
# Input devices # ********************************************************************** #
**********************************************************************
# Keyboard section # ********************************************************************** Section "Keyboard"
Protocol "Standard"
# when using XQUEUE, comment out the above line, and uncomment
the
# following line # Protocol "Xqueue"
AutoRepeat 500 5
# Let the server do the NumLock processing. This should only be required # when using pre-R6 clients # ServerNumLock # Specify which keyboard LEDs can be user-controlled (eg, with
xset(1))
# Xleds 1 2 3 # To set the LeftAlt to Meta, RightAlt key to ModeShift,
# RightCtl key to Compose, and ScrollLock key to ModeLock: # LeftAlt
Meta
# RightAlt ModeShift # RightCtl Compose # ScrollLock ModeLock # To disable the XKEYBOARD extension, uncomment
XkbDisable.
# XkbDisable
# To customise the XKB settings to suit your keyboard, modify
the
# lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # XkbModel "pc102" # If you have a US Microsoft Natural keyboard, you can use: # XkbModel "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # XkbLayout "de" # or: # XkbLayout "de" # XkbVariant "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # XkbOptions "ctrl:swapcaps" # These are the default XKB settings for
XFree86
# XkbRules "xfree86" # XkbModel "pc101" # XkbLayout "us" # XkbVariant "" # XkbOptions "" XkbKeymap
"xfree86(de)"
EndSection # ********************************************************************** # Pointer section # ********************************************************************** Section "Pointer"
Protocol "PS/2" Device "/dev/mouse" # When using XQUEUE, comment out the above two lines, and
uncomment
# the following line. # Protocol "Xqueue"
# Baudrate and SampleRate are only for some Logitech
mice
# BaudRate 9600
# SampleRate 150 # Emulate3Buttons is an option for 2-button Microsoft
mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms) # Emulate3Buttons
# Emulate3Timeout 50 # ChordMiddle is an option for some 3-button Logitech
mice
# ChordMiddle
EndSection
# ********************************************************************** # Xinput section -- this is optional and is required only if you # are using extended input devices. This is for example only. Refer # to the XF86Config man page for a description of the options. # ********************************************************************** # # Section "Xinput" # SubSection "WacomStylus" # Port "/dev/ttyS1" # DeviceName "Wacom" # EndSubSection # SubSection "WacomCursor" # Port "/dev/ttyS1" # EndSubSection # SubSection "WacomEraser" # Port "/dev/ttyS1" # EndSubSection # # SubSection "Elographics" # Port "/dev/ttyS1" # DeviceName "Elo" # MinimumXPosition 300 # MaximumXPosition 3500 # MinimumYPosition 300 # MaximumYPosition 3500 # Screen 0 # UntouchDelay 10 # ReportDelay 10 # EndSubSection # # SubSection "Joystick" # Port "/dev/joy0" # DeviceName "Joystick" # TimeOut 10 # MinimumXPosition 100 # MaximumXPosition 1300 # MinimumYPosition 100 # MaximumYPosition 1100 # # CenterX 700 # # CenterY 600 # Delta 20 # EndSubSection # # The Mouse Subsection contains the same type of entries as the # standard Pointer Section (see above), with the addition of the # DeviceName entry. # # SubSection "Mouse" # Port "/dev/mouse2" # DeviceName "Second Mouse" # Protocol "Logitech" # EndSubSection # EndSection #
**********************************************************************
# Monitor section # ********************************************************************** # Any number of monitor sections may be present
Section "Monitor"
Identifier "My
Monitor"
VendorName "Unknown" ModelName "Unknown" # HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. HorizSync 31.5
#
HorizSync 30-64 #
multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies # VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a # comma separated list of ranges of values. # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S # USER MANUAL FOR THE CORRECT NUMBERS. VertRefresh 10
# Modes can be specified in two formats. A compact
one-line format, or
# a multi-line format. # These two are equivalent
# ModeLine "1024x768i" 45 1024 1048 1208
1264 768 776 784 817 Interlace
# Mode
"1024x768i"
# DotClock 45 # HTimings 1024 1048 1208 1264 # VTimings 768 776 784 817 # Flags "Interlace" # EndMode # This is a set of standard mode timings. Modes that are out
of monitor spec
# are automatically deleted by the server (provided the HorizSync and # VertRefresh lines are correct), so there's no immediate need to # delete mode timings (unless particular mode timings don't work on your # monitor). With these modes, the best standard mode that your monitor # and video card can support for a given resolution is automatically # used. # 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400" 25.175 640 664 760 800 400 409 411 450 # 640x480 @ 60 Hz, 31.5 kHz hsync Modeline "640x480" 25.175 640 664 760 800 480 491 493 525 # 800x600 @ 56 Hz, 35.15 kHz hsync ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 # 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync Modeline "1024x768" 44.9 1024 1048 1208 1264 768 776 784 817 Interlace # 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400" 31.5 640 672 736 832 400 401 404 445 -HSync +VSync # 640x480 @ 72 Hz, 36.5 kHz hsync Modeline "640x480" 31.5 640 680 720 864 480 488 491 521 # 640x480 @ 75 Hz, 37.50 kHz hsync ModeLine "640x480" 31.5 640 656 720 840 480 481 484 500 -HSync -VSync # 800x600 @ 60 Hz, 37.8 kHz hsync Modeline "800x600" 40 800 840 968 1056 600 601 605 628 +hsync +vsync # 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x400" 36 640 696 752 832 480 481 484 509 -HSync -VSync # 1152x864 @ 89 Hz interlaced, 44 kHz hsync ModeLine "1152x864" 65 1152 1168 1384 1480 864 865 875 985 Interlace # 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600" 50 800 856 976 1040 600 637 643 666 +hsync +vsync # 1024x768 @ 60 Hz, 48.4 kHz hsync Modeline "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync # 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480" 45.8 640 672 768 864 480 488 494 530 -HSync -VSync # 1152x864 @ 60 Hz, 53.5 kHz hsync Modeline "1152x864" 89.9 1152 1216 1472 1680 864 868 876 892 -HSync -VSync # 800x600 @ 85 Hz, 55.84 kHz hsync Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 -HSync -VSync # 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768" 75 1024 1048 1184 1328 768 771 777 806 -hsync -vsync # 1280x1024 @ 87 Hz interlaced, 51 kHz hsync Modeline "1280x1024" 80 1280 1296 1512 1568 1024 1025 1037 1165 Interlace # 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 -HSync -VSync # 1024x768 @ 76 Hz, 62.5 kHz hsync Modeline "1024x768" 85 1024 1032 1152 1360 768 784 787 823 # 1152x864 @ 70 Hz, 62.4 kHz hsync Modeline "1152x864" 92 1152 1208 1368 1474 864 865 875 895 # 1280x1024 @ 61 Hz, 64.2 kHz hsync Modeline "1280x1024" 110 1280 1328 1512 1712 1024 1025 1028 1054 # 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768" 98.9 1024 1056 1216 1408 768 782 788 822 -HSync -VSync # 1152x864 @ 78 Hz, 70.8 kHz hsync Modeline "1152x864" 110 1152 1240 1324 1552 864 864 876 908 # 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024" 126.5 1280 1312 1472 1696 1024 1032 1040 1068 -HSync -VSync # 1600x1200 @ 60Hz, 75.00 kHz hsync Modeline "1600x1200" 162 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync # 1152x864 @ 84 Hz, 76.0 kHz hsync Modeline "1152x864" 135 1152 1464 1592 1776 864 864 876 908 # 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024" 135 1280 1312 1456 1712 1024 1027 1030 1064 # 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768" 115.5 1024 1056 1248 1440 768 771 781 802 -HSync -VSync # 1280x1024 @ 76 Hz, 81.13 kHz hsync Modeline "1280x1024" 135 1280 1312 1416 1664 1024 1027 1030 1064 # 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200" 189 1600 1664 1856 2160 1200 1201 1204 1250 -HSync -VSync # 1152x864 @ 100 Hz, 89.62 kHz hsync Modeline "1152x864" 137.65 1152 1184 1312 1536 864 866 885 902 -HSync -VSync # 1280x1024 @ 85 Hz, 91.15 kHz hsync Modeline "1280x1024" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +HSync +VSync # 1600x1200 @ 75 Hz, 93.75 kHz hsync Modeline "1600x1200" 202.5 1600 1664 1856 2160 1200 1201 1204 1250 +HSync +VSync # 1600x1200 @ 85 Hz, 105.77 kHz hsync Modeline "1600x1200" 220 1600 1616 1808 2080 1200 1204 1207 1244 +HSync +VSync # 1280x1024 @ 100 Hz, 107.16 kHz hsync Modeline "1280x1024" 181.75 1280 1312 1440 1696 1024 1031 1046 1072 -HSync -VSync # 1800x1440 @ 64Hz, 96.15 kHz hsync
ModeLine "1800X1440" 230 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # 1800x1440 @ 70Hz, 104.52 kHz hsync ModeLine "1800X1440" 250 1800 1896 2088 2392 1440 1441 1444 1490 +HSync +VSync # 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384" 20.160 512 528 592 640 384 385 388 404 -HSync -VSync # 512x384 @ 85 Hz, 34.38 kHz hsync Modeline "512x384" 22 512 528 592 640 384 385 388 404 -HSync -VSync # Low-res Doublescan modes
# If your chipset does not support doublescan, you get a 'squashed' # resolution like 320x400. # 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect
ratio
Modeline "320x200" 12.588 320 336 384 400 200 204 205 225 Doublescan # 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio Modeline "320x240" 12.588 320 336 384 400 240 245 246 262 Doublescan # 320x240 @ 72 Hz, 36.5 kHz hsync Modeline "320x240" 15.750 320 336 384 400 240 244 246 262 Doublescan # 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio ModeLine "400x300" 18 400 416 448 512 300 301 302 312 Doublescan # 400x300 @ 60 Hz, 37.8 kHz hsync Modeline "400x300" 20 400 416 480 528 300 301 303 314 Doublescan # 400x300 @ 72 Hz, 48.0 kHz hsync Modeline "400x300" 25 400 424 488 520 300 319 322 333 Doublescan # 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio ModeLine "480x300" 21.656 480 496 536 616 300 301 302 312 Doublescan # 480x300 @ 60 Hz, 37.8 kHz hsync Modeline "480x300" 23.890 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 63 Hz, 39.6 kHz hsync Modeline "480x300" 25 480 496 576 632 300 301 303 314 Doublescan # 480x300 @ 72 Hz, 48.0 kHz hsync Modeline "480x300" 29.952 480 504 584 624 300 319 322 333 Doublescan EndSection
# ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be
present
# Standard VGA Device:
Section "Device"
Identifier "Generic VGA" VendorName "Unknown" BoardName "Unknown" Chipset "generic" Option "no_accel" Option "sw_cursor" # VideoRam 256 # Clocks 25.2 28.3
EndSection
# Sample Device for accelerated server:
# Section "Device"
# Identifier "Actix GE32+ 2MB" # VendorName "Actix" # BoardName "GE32+" # Ramdac "ATT20C490" # Dacspeed 110 # Option "dac_8_bit" # Clocks 25.0 28.0 40.0 0.0 50.0 77.0 36.0 45.0 # Clocks 130.0 120.0 80.0 31.0 110.0 65.0 75.0 94.0 # EndSection # Sample Device for Hercules mono card:
# Section "Device"
# Identifier "Hercules mono" # EndSection # Device configured by xf86config:
Section "Device"
Identifier "My Video Card" VendorName "Unknown" BoardName "Unknown" #VideoRam 512 # Insert Clocks lines here if appropriate EndSection # ********************************************************************** # Screen sections # ********************************************************************** # The Colour SVGA server
Section "Screen"
Driver "svga" Device "Generic VGA" #Device "My Video Card" Monitor "My Monitor" Subsection "Display" Depth 8 #Modes "640x480" "800x600" ViewPort 0 0 Virtual 320 200 #Virtual 800 600 EndSubsection EndSection # The 16-color VGA server
Section "Screen"
Driver "vga16" Device "My Video Card" Monitor "My Monitor" Subsection "Display" Modes "640x480" "640x480" ViewPort 0 0 Virtual 800 600 EndSubsection EndSection # The Mono server
Section "Screen"
Driver "vga2" Device "My Video Card" Monitor "My Monitor" Subsection "Display" Modes "640x480" "800x600" ViewPort 0 0 Virtual 800 600 EndSubsection EndSection # The accelerated servers (S3, Mach32, Mach8, 8514, P9000,
AGX, W32, Mach64)
Section "Screen"
Driver "accel" Device "My Video Card" Monitor "My Monitor" Subsection "Display" Depth 8 Modes "640x480" "800x600" ViewPort 0 0 EndSubsection Subsection "Display" Depth 16 Modes "640x400" ViewPort 0 0 EndSubsection Subsection "Display" Depth 24 Modes "640x480" ViewPort 0 0 EndSubsection Subsection "Display" Depth 32 Modes "640x480" ViewPort 0 0 EndSubsection EndSection |
