Do you allocate the amount of memory to the video card in the BIOS ?? Is it currently set to 4MB ? Also, Can you try commenting out the line that says Modes "1400x1050" "1280x1024" and use Modes "1024x768" just as a test for me. Alan. On Fri, May 24, 2002 at 12:41:29PM +0100, Tino Pintonato wrote: > > Thanks Alan but > > Ooops! > > I replace driver with the new one, but you can see the result on log file. > > Linux hang up on "XP: BitBlt engine time-out" > > May be I must compile the DRM Kernel module ? > > Tino > > > ----- Original Message ----- > From: "Alan Hourihane" <alanh@fairlite.demon.co.uk> > To: <newbie@XFree86.Org> > Sent: Thursday, May 23, 2002 5:23 PM > Subject: Re: [Newbie]Trident CyberBladeXP 32M > > > > Download a new driver from http://www.xfree86.org/~alanh to fix these > > problems. > > > > Alan. > > > > On Thu, May 23, 2002 at 03:53:00 +0100, Tino Pintonato wrote: > > > Thanks SAM > > > > > > I got the X running with your config file. > > > > > > I have some other questions: > > > 1) On the log X find a TFT display ?? I have a Hansol 710 P (Max res > 1600 x > > > 1200 @ 75 Hz) > > > X works with max 800x600, if I try 1280 x 1024 I got double image > > > overlapped, res seems 640x480 > > > 2) On the log X find a 8MB ram, but it is 32MB. Why? > > > 3) Option "Display1400" is not used, it means something? > > > > > > Thanks, > > > > > > Tino Pintonato > > > > > > ----- Original Message ----- > > > From: <SRudland@manu.com> > > > To: <riko.tecnici@rialto.sk> > > > Sent: Wednesday, May 15, 2002 4:08 PM > > > Subject: Re: [Newbie]Trident CyberBladeXP 32M > > > > > > > > > > > > > > > I have a Trident XP and am running RedHat 7.3 with Xfree 4.2. Here is a > > > copy of my XF86config-4 file > > > > > > (See attached file: XF86Config-4) > > > > > > Works fine for 1400 x 1050 and below, although there is a slight bug > with a > > > small poirtion of the left side of the screen being moved to the right. > > > > > > Cheers, > > > > > > > -------------------------------------------------------------------------- > -- > > > ----------------- > > > > > > Sam Rudland > > > > > > > > > > > > |---------+----------------------------> > > > | | "Tino Pintonato" | > > > | | <riko.tecnici@ria| > > > | | lto.sk> | > > > | | Sent by: | > > > | | newbie-admin@XFre| > > > | | e86.Org | > > > | | | > > > | | | > > > | | 05/15/02 04:44 PM| > > > | | Please respond to| > > > | | newbie | > > > | | | > > > |---------+----------------------------> > > > > > > > >--------------------------------------------------------------------------- > > > -------------------------------------------------------------| > > > | > > > | > > > | To: <newbie@XFree86.Org> > > > | > > > | cc: > > > | > > > | Subject: [Newbie]Trident CyberBladeXP 32M > > > | > > > > > > > >--------------------------------------------------------------------------- > > > -------------------------------------------------------------| > > > > > > > > > > > > > > > > > > Hi > > > > > > I have mainboard INTEL with integrated a Trident CyberBladeXP/T64/T16 > 32M. > > > > > > I first install RedHat 7.2 (X4.1), installation proceed ok, but X show > > > only black display. > > > After some search I found that X 4.2 support the CyberBladeXP. > > > > > > I try Mandrake 8.3 (X 4.2), on X check the maximum resulution seems to > be > > > < 640 x 480. > > > On running system X start but still resolution remain low, X seems > start, > > > login screen is over > > > the dimensions of the display and it doesn't work. > > > > > > I try to configure with XFree86 -configure. The same. > > > I try xf86config. The same. > > > I try xf86cfg. The same. > > > > > > I include configuration and log file. > > > > > > Someone could help me? > > > > > > Thanks > > > Tino > > > (See attached file: XFree86.0.log) > > > (See attached file: XF86Config) > > > > > > > > > > > > > > > > > _______________________________________________ > > > > Newbie@XFree86.Org > > *** To unsubscribe , or change message options, see: > > http://XFree86.Org/mailman/listinfo/newbie
