Download a new driver from http://www.xfree86.org/~alanh to fix these problems. Alan. On Thu, May 23, 2002 at 03:53:00 +0100, Tino Pintonato wrote: > Thanks SAM > > I got the X running with your config file. > > I have some other questions: > 1) On the log X find a TFT display ?? I have a Hansol 710 P (Max res 1600 x > 1200 @ 75 Hz) > X works with max 800x600, if I try 1280 x 1024 I got double image > overlapped, res seems 640x480 > 2) On the log X find a 8MB ram, but it is 32MB. Why? > 3) Option "Display1400" is not used, it means something? > > Thanks, > > Tino Pintonato > > ----- Original Message ----- > From: <SRudland@manu.com> > To: <riko.tecnici@rialto.sk> > Sent: Wednesday, May 15, 2002 4:08 PM > Subject: Re: [Newbie]Trident CyberBladeXP 32M > > > > > I have a Trident XP and am running RedHat 7.3 with Xfree 4.2. Here is a > copy of my XF86config-4 file > > (See attached file: XF86Config-4) > > Works fine for 1400 x 1050 and below, although there is a slight bug with a > small poirtion of the left side of the screen being moved to the right. > > Cheers, > > ---------------------------------------------------------------------------- > ----------------- > > Sam Rudland > > > > |---------+----------------------------> > | | "Tino Pintonato" | > | | <riko.tecnici@ria| > | | lto.sk> | > | | Sent by: | > | | newbie-admin@XFre| > | | e86.Org | > | | | > | | | > | | 05/15/02 04:44 PM| > | | Please respond to| > | | newbie | > | | | > |---------+----------------------------> > > >--------------------------------------------------------------------------- > -------------------------------------------------------------| > | > | > | To: <newbie@XFree86.Org> > | > | cc: > | > | Subject: [Newbie]Trident CyberBladeXP 32M > | > > >--------------------------------------------------------------------------- > -------------------------------------------------------------| > > > > > > Hi > > I have mainboard INTEL with integrated a Trident CyberBladeXP/T64/T16 32M. > > I first install RedHat 7.2 (X4.1), installation proceed ok, but X show > only black display. > After some search I found that X 4.2 support the CyberBladeXP. > > I try Mandrake 8.3 (X 4.2), on X check the maximum resulution seems to be > < 640 x 480. > On running system X start but still resolution remain low, X seems start, > login screen is over > the dimensions of the display and it doesn't work. > > I try to configure with XFree86 -configure. The same. > I try xf86config. The same. > I try xf86cfg. The same. > > I include configuration and log file. > > Someone could help me? > > Thanks > Tino > (See attached file: XFree86.0.log) > (See attached file: XF86Config) > > >
