[Newbie]Compaq Deskpro 2000 5166MMX w/integrated S3 Trio64V4

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Thank you. So far I've been looking at the wrong lists, published somewhere
else.

Now I'm one step further. It looks that there is no tested driver supporting
the RAMDAC.

Now I even know what a RAMDAC is, and after opening my computer I managed to
find it. It is a 86C785. Now I even know what all these numbers are. So far
I was even not aware that it is a S3 Trio64V4/GX.

IBM has similar problems with some Netfinity servers. They provide now a
patched driver for SuSE Linux. After I've got more insight now and reviewing
all my notes I assume that this driver ist for XFree86 V3 (3.3) and not V4.

Now, for the first time I managed to setup V4 (4.2) in a way it seems to
work with a low resolution (640x480). This is a big suggess for me! I have
not yet tried with 600x800 or SVGA.

Sometimes, the right pointers are worth much more than great technical
explanations. How could I oversee the Driver Status document in the V4
documentation.

Kind regards,

Peter

----- Original Message -----
From: "Lionel Lecoq" <lionel_lecoq@yahoo.com>
To: <newbie@XFree86.Org>
Sent: Saturday, April 27, 2002 10:38 PM
Subject: Re: [Newbie]Compaq Deskpro 2000 5166MMX w/integrated S3 Trio64V4


> Hi,
> Have a look at www.xfree86.org > Support,Documentation and resources >
XFree86.4.x.x online
> documentation > Drivers status for... and then S3
> You will find out that the card is supported under some restrictions
> If, in your case it is not, you should have no problems with v3, try using
the SVGA driver...
> posting both XF86Config file and log (/var/log/XFree86.0.log) would allow
people to help.
> Lionel
> --- Peter Gloor <pgloor@gmx.net> wrote:
> > I'm trying to get XFree86 V4 working on a Compaq Deskpro 2000 5166MMX
> > w/integrated S3 Trio64V4 on SuSE Linux 7.3.
> >
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Health - your guide to health and wellness
> http://health.yahoo.com
> _______________________________________________
> 
> Newbie@XFree86.Org
> *** To unsubscribe , or change message options, see:
> http://XFree86.Org/mailman/listinfo/newbie
>



[Index of Archives]     [XFree86]     [Xfree86 Xpert]     [X.org]     [IETF Annouce]     [Security]     [Bugtraq]     [Yosemite]     [MIPS Linux]     [ARM Linux]     [Picture Sharing]     [Linux Security]     [Linux RAID]

  Powered by Linux