[Note: this has been CC'd to the wacom@lepied.com. Some of the information has been repeated in that mailing list.] I do not have problems when using an ordinary serial mouse, but when XFree86 (ver. 4.1.0) is set up to use the Wacom Intuos, switching to a virtual console and back to X causes X to appear frozen, sometimes with a band of colorful garbage at the top of the screen. >From what I can tell, everything still works, but the graphics on the screen are frozen and I have to type things blindly. Exiting X, though, sometimes gets hinky, too. For example, pressing Ctrl-Alt-Backspace, pressing Ctrl-Alt-F2, typing my login and password, and then typing startx again usually starts X up again, although exiting X will usually lead me to be greeted by another frozen screen, a black one with an image of a mouse cursor. I can start up X again by typing startx, but to get X to leave me a clean screen on exit again seems to require a reboot. Occasionally, merely exiting X will leave me with a screenful of colorful garbage, mostly a bunch of "dancing" colored zigzag lines. Again, I can start up X again by typing startx, but to get X to leave me a clean screen on exit again seems to require a reboot. Sometimes, typing startx blindly on the command line doesn't do much good. The image will be blurred in the vertical direction, as if a bunch of images all offset vertically somewhat were superimposed. Only a reboot seems to be able to fix this. Typing "reset," "clear," or the Ctrl-V Esc-C Enter key sequence are ineffective at clearing the screen. Logging in remotely and killing all logins and mingettys also doesn't work. My OS is Red Hat 7.2, Linux kernel version 2.4.9, the Wacom driver is alpha26, recompiled for XFree86 4.1.0, and my video card is an NVIDIA GeForce2 MX 400, nv driver installed. I have had similar problems with the alpha25 Wacom driver with an ATI Xpert@Work video card. From what I can tell, I am not using the Linux framebuffer; the fbdevhw module is loaded, but the UseFBDev option is not set (and the man page for the nv driver tells me it's off by default). My /var/log/XFree86.0.log: XFree86 Version 4.1.0 (Unofficial Build: 4.1.0-15.5jj) / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 2 June 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.9-31 i686 [ELF] Build Host: jjlinux.samuraii Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Thu Apr 4 18:04:59 2002 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "Anaconda Configured" (**) |-->Screen "Screen0" (0) (**) | |-->Monitor "Monitor0" (**) | |-->Device "NVIDIA GeForce 2 MX (generic)" (**) |-->Input Device "Mouse0" (**) |-->Input Device "Keyboard0" (**) Option "XkbRules" "xfree86" (**) XKB: rules: "xfree86" (**) Option "XkbModel" "pc105" (**) XKB: model: "pc105" (**) Option "XkbLayout" "us" (**) XKB: layout: "us" (==) Keyboard: CustomKeycode disabled (**) |-->Input Device "pen1" (**) |-->Input Device "eraser1" (**) |-->Input Device "cursor1" (**) FontPath set to "unix/:7100" (**) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (**) Option "AllowMouseOpenFail" "true" (--) using VT number 7 (II) Open APM successful (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.4 XFree86 XInput driver : 0.2 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.2 (II) Loader running on linux (II) LoadModule: "bitmap" (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.2 (II) Loading font Bitmap (II) LoadModule: "pcidata" (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 10b9,1647 card 0000,0000 rev 04 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 10b9,5247 card 0000,0000 rev 00 class 06,04,00 hdr 01 (II) PCI: 00:02:0: chip 10b9,5237 card 10b9,5237 rev 03 class 0c,03,10 hdr 00 (II) PCI: 00:04:0: chip 10b9,5229 card 10b9,5229 rev c4 class 01,01,8a hdr 00 (II) PCI: 00:07:0: chip 10b9,1533 card 10b9,1533 rev 00 class 06,01,00 hdr 00 (II) PCI: 00:09:0: chip 11ad,0002 card 11ad,f003 rev 20 class 02,00,00 hdr 00 (II) PCI: 00:0a:0: chip 1102,0002 card 1102,8027 rev 08 class 04,01,00 hdr 80 (II) PCI: 00:0a:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00 hdr 80 (II) PCI: 00:11:0: chip 10b9,7101 card 10b9,7101 rev 00 class 06,80,00 hdr 00 (II) PCI: 01:00:0: chip 10de,0110 card 1545,0023 rev b2 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: "scanpci" (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (II) UnloadModule: "scanpci" (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) PCI-to-ISA bridge: (II) PCI-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0e (VGA_EN is set) (II) Bus 1 I/O range: (II) Bus 1 non-prefetchable memory range: [0] -1 0xec000000 - 0xedffffff (0x2000000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B] (II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus -1 I/O range: (II) Bus -1 non-prefetchable memory range: (II) Bus -1 prefetchable memory range: (--) PCI:*(1:0:0) NVidia GeForce2 MX rev 178, Mem @ 0xec000000/24, 0xe0000000/27 (II) Addressable bus resource ranges are [0] -1 0x00000000 - 0xffffffff (0x0) MX[B] [1] -1 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) OS-reported resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) Active PCI resource ranges: [0] -1 0xef000000 - 0xef0000ff (0x100) MX[B] [1] -1 0xef001000 - 0xef001fff (0x1000) MX[B] [2] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B] [3] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [4] -1 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [5] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B] [6] -1 0x0000e800 - 0x0000e81f (0x20) IX[B] [7] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B] [8] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) Active PCI resource ranges after removing overlaps: [0] -1 0xef000000 - 0xef0000ff (0x100) MX[B] [1] -1 0xef001000 - 0xef001fff (0x1000) MX[B] [2] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B] [3] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [4] -1 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [5] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B] [6] -1 0x0000e800 - 0x0000e81f (0x20) IX[B] [7] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B] [8] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) OS-reported resource ranges after removing overlaps with PCI: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [6] -1 0x00000000 - 0x000000ff (0x100) IX[B] (II) All system resource ranges: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xef000000 - 0xef0000ff (0x100) MX[B] [6] -1 0xef001000 - 0xef001fff (0x1000) MX[B] [7] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B] [8] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [9] -1 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B] [13] -1 0x0000e800 - 0x0000e81f (0x20) IX[B] [14] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B] [15] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) LoadModule: "GLcore" (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) LoadModule: "dbe" (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension DOUBLE-BUFFER (II) LoadModule: "extmod" (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension SHAPE (II) Loading extension MIT-SUNDRY-NONSTANDARD (II) Loading extension BIG-REQUESTS (II) Loading extension SYNC (II) Loading extension MIT-SCREEN-SAVER (II) Loading extension XC-MISC (II) Loading extension XFree86-VidModeExtension (II) Loading extension XFree86-Misc (II) Loading extension XFree86-DGA (II) Loading extension DPMS (II) Loading extension FontCache (II) Loading extension TOG-CUP (II) Loading extension Extended-Visual-Information (II) Loading extension XVideo (II) Loading extension XVideo-MotionCompensation (II) LoadModule: "fbdevhw" (II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a (II) Module fbdevhw: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.0.2 ABI class: XFree86 Video Driver, version 0.4 (II) LoadModule: "pex5" (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a (II) Module pex5: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension X3D-PEX (II) LoadModule: "dri" (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading sub module "drm" (II) LoadModule: "drm" (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension XFree86-DRI (II) LoadModule: "glx" (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 ABI class: XFree86 Server Extension, version 0.1 (II) Loading sub module "GLcore" (II) LoadModule: "GLcore" (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Loading extension GLX (II) LoadModule: "pex5" (II) Reloading /usr/X11R6/lib/modules/extensions/libpex5.a (II) Loading extension X3D-PEX (II) LoadModule: "record" (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.13.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension RECORD (II) LoadModule: "xie" (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a (II) Module xie: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 Server Extension ABI class: XFree86 Server Extension, version 0.1 (II) Loading extension XIE (II) LoadModule: "wacom" (II) Loading /usr/X11R6/lib/modules/input/wacom_drv.o (II) Module wacom: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.2 (II) Wacom driver level: 26 $ (II) LoadModule: "nv" (II) Loading /usr/X11R6/lib/modules/drivers/nv_drv.o (II) Module nv: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.1 Module class: XFree86 Video Driver ABI class: XFree86 Video Driver, version 0.4 (II) LoadModule: "mouse" (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 Module class: XFree86 XInput Driver ABI class: XFree86 XInput driver, version 0.2 (II) LoadModule: "wacom" (II) Reloading /usr/X11R6/lib/modules/input/wacom_drv.o (II) Wacom driver level: 26 $ (II) NV: driver for NVIDIA chipsets: RIVA128, RIVATNT, RIVATNT2, RIVATNT2 (A), RIVATNT2 (B), RIVATNT2 (Ultra), RIVATNT2 (Vanta), RIVATNT2 M64, RIVATNT2 (Integrated), GeForce 256, GeForce DDR, Quadro, GeForce2 GTS, GeForce2 GTS (rev 1), GeForce2 ultra, Quadro 2 Pro, GeForce2 MX, GeForce2 MX DDR, Quadro 2 MXR, GeForce 2 Go, GeForce3, GeForce3 (rev 1), GeForce3 (rev 2), GeForce3 (rev 3) (II) Primary Device is: PCI 01:00:0 (--) Assigning device section with no busID to primary device (--) Chipset GeForce2 MX found (II) resource ranges after xf86ClaimFixedResources() call: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xef000000 - 0xef0000ff (0x100) MX[B] [6] -1 0xef001000 - 0xef001fff (0x1000) MX[B] [7] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B] [8] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [9] -1 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [11] -1 0x00000000 - 0x000000ff (0x100) IX[B] [12] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B] [13] -1 0x0000e800 - 0x0000e81f (0x20) IX[B] [14] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B] [15] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] (II) resource ranges after probing: [0] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [1] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [2] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [3] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [4] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [5] -1 0xef000000 - 0xef0000ff (0x100) MX[B] [6] -1 0xef001000 - 0xef001fff (0x1000) MX[B] [7] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B] [8] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [9] -1 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [10] 0 0x000a0000 - 0x000affff (0x10000) MS[B] [11] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] [12] 0 0x000b8000 - 0x000bffff (0x8000) MS[B] [13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [14] -1 0x00000000 - 0x000000ff (0x100) IX[B] [15] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B] [16] -1 0x0000e800 - 0x0000e81f (0x20) IX[B] [17] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B] [18] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] [19] 0 0x000003b0 - 0x000003bb (0xc) IS[B] [20] 0 0x000003c0 - 0x000003df (0x20) IS[B] (II) Setting vga for screen 0. (II) Loading sub module "int10" (II) LoadModule: "int10" (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.4 (II) NV(0): Initializing int10 (II) NV(0): Primary V_BIOS segment is: 0xc000 (--) NV(0): Chipset: "GeForce2 MX" (**) NV(0): Depth 24, (--) framebuffer bpp 32 (==) NV(0): RGB weight 888 (==) NV(0): Default visual is TrueColor (II) Loading sub module "vgahw" (II) LoadModule: "vgahw" (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (==) NV(0): Using HW cursor (--) NV(0): Linear framebuffer at 0xE0000000 (--) NV(0): MMIO registers at 0xEC000000 (--) NV(0): VideoRAM: 65536 kBytes (II) Loading sub module "ddc" (II) LoadModule: "ddc" (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.4 (II) Loading sub module "i2c" (II) LoadModule: "i2c" (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.2.0 ABI class: XFree86 Video Driver, version 0.4 (II) NV(0): I2C bus "DDC" initialized. (II) NV(0): I2C device "DDC:ddc2" registered. (II) NV(0): I2C device "DDC:ddc2" removed. (II) NV(0): I2C device "DDC:ddc2" registered. (II) NV(0): I2C device "DDC:ddc2" removed. (II) NV(0): DDC Monitor info: 0x8573ca8 (II) NV(0): Manufacturer: VSC Model: 594a Serial#: 26011 (II) NV(0): Year: 1998 Week: 13 (II) NV(0): EDID Version: 1.1 (II) NV(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) NV(0): Sync: Separate Composite SyncOnGreenSerration on. V.Sync Pulse req. if CompSync or SyncOnGreen (II) NV(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24 (II) NV(0): Gamma: 2.87 (II) NV(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display (II) NV(0): redX: 0.635 redY: 0.333 greenX: 0.280 greenY: 0.595 (II) NV(0): blueX: 0.152 blueY: 0.063 whiteX: 0.283 whiteY: 0.298 (II) NV(0): Supported VESA Video Modes: (II) NV(0): 720x400@70Hz (II) NV(0): 720x400@88Hz (II) NV(0): 640x480@60Hz (II) NV(0): 640x480@67Hz (II) NV(0): 640x480@72Hz (II) NV(0): 640x480@75Hz (II) NV(0): 800x600@56Hz (II) NV(0): 800x600@60Hz (II) NV(0): 800x600@72Hz (II) NV(0): 800x600@75Hz (II) NV(0): 832x624@75Hz (II) NV(0): 1024x768@87Hz (interlaced) (II) NV(0): 1024x768@60Hz (II) NV(0): 1024x768@70Hz (II) NV(0): 1024x768@75Hz (II) NV(0): 1152x870@75Hz (II) NV(0): Manufacturer's mask: 0 (II) NV(0): Supported Future Video Modes: (II) NV(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) NV(0): #1: hsize: 1024 vsize 768 refresh: 75 vid: 20321 (II) NV(0): #2: hsize: 1024 vsize 768 refresh: 70 vid: 19041 (II) NV(0): #3: hsize: 832 vsize 624 refresh: 75 vid: 20297 (II) NV(0): #4: hsize: 800 vsize 600 refresh: 75 vid: 20293 (II) NV(0): #5: hsize: 640 vsize 480 refresh: 75 vid: 20273 (II) NV(0): #6: hsize: 640 vsize 480 refresh: 60 vid: 16433 (II) NV(0): #7: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) NV(0): Supported additional Video Mode: (II) NV(0): clock: 108.0 MHz Image Size: 286 x 229 mm (II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0 (II) NV(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0 (II) NV(0): Supported additional Video Mode: (II) NV(0): clock: 80.0 MHz Image Size: 300 x 225 mm (II) NV(0): h_active: 1024 h_sync: 1056 h_sync_end 1152 h_blank_end 1328 h_border: 0 (II) NV(0): v_active: 768 v_sync: 771 v_sync_end 774 v_blanking: 804 v_border: 0 (II) NV(0): Supported additional Video Mode: (II) NV(0): clock: 78.8 MHz Image Size: 300 x 225 mm (II) NV(0): h_active: 1024 h_sync: 1040 h_sync_end 1136 h_blank_end 1312 h_border: 0 (II) NV(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 800 v_border: 0 (II) NV(0): Ranges: V min: 50 V max: 180 Hz, H min: 30 H max: 70 kHz, PixClock max 120 MHz (II) NV(0): end of DDC Monitor info (==) NV(0): Using gamma correction (1.0, 1.0, 1.0) (II) NV(0): Monitor0: Using hsync range of 30.00-70.00 kHz (II) NV(0): Monitor0: Using vrefresh range of 50.00-180.00 Hz (II) NV(0): Clock range: 12.00 to 350.00 MHz (II) NV(0): Not using mode "1400x1050" (hsync out of range) (II) NV(0): Not using mode "1400x1050" (hsync out of range) (II) NV(0): Not using mode "1400x1050" (hsync out of range) (II) NV(0): Not using default mode "1280x960" (hsync out of range) (II) NV(0): Not using default mode "1280x1024" (hsync out of range) (II) NV(0): Not using default mode "1280x1024" (hsync out of range) (II) NV(0): Not using default mode "1600x1200" (hsync out of range) (II) NV(0): Not using default mode "1600x1200" (hsync out of range) (II) NV(0): Not using default mode "1600x1200" (hsync out of range) (II) NV(0): Not using default mode "1600x1200" (hsync out of range) (II) NV(0): Not using default mode "1600x1200" (hsync out of range) (II) NV(0): Not using default mode "1792x1344" (hsync out of range) (II) NV(0): Not using default mode "1792x1344" (hsync out of range) (II) NV(0): Not using default mode "1856x1392" (hsync out of range) (II) NV(0): Not using default mode "1856x1392" (hsync out of range) (II) NV(0): Not using default mode "1920x1440" (hsync out of range) (II) NV(0): Not using default mode "1920x1440" (hsync out of range) (--) NV(0): Virtual size is 1024x768 (pitch 1024) (**) NV(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (II) NV(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (--) NV(0): Display dimensions: (32, 24) cm (--) NV(0): DPI set to (81, 81) (II) Loading sub module "fb" (II) LoadModule: "fb" (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 ABI class: XFree86 ANSI C Emulation, version 0.1 (II) Loading sub module "xaa" (II) LoadModule: "xaa" (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.1.0, module version = 1.0.0 ABI class: XFree86 Video Driver, version 0.4 (II) Loading sub module "ramdac" (II) LoadModule: "ramdac" (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.1.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.4 (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B] [1] 0 0xec000000 - 0xecffffff (0x1000000) MX[B] [2] -1 0xffe00000 - 0xffffffff (0x200000) MX[B](B) [3] -1 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) [4] -1 0x000f0000 - 0x000fffff (0x10000) MX[B] [5] -1 0x000c0000 - 0x000effff (0x30000) MX[B] [6] -1 0x00000000 - 0x0009ffff (0xa0000) MX[B] [7] -1 0xef000000 - 0xef0000ff (0x100) MX[B] [8] -1 0xef001000 - 0xef001fff (0x1000) MX[B] [9] -1 0xe8000000 - 0xebffffff (0x4000000) MX[B] [10] -1 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B) [11] -1 0xec000000 - 0xecffffff (0x1000000) MX[B](B) [12] 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) [13] 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) [14] 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) [15] -1 0x0000ffff - 0x0000ffff (0x1) IX[B] [16] -1 0x00000000 - 0x000000ff (0x100) IX[B] [17] -1 0x0000ec00 - 0x0000ec07 (0x8) IX[B] [18] -1 0x0000e800 - 0x0000e81f (0x20) IX[B] [19] -1 0x0000e400 - 0x0000e4ff (0x100) IX[B] [20] -1 0x0000e000 - 0x0000e00f (0x10) IX[B] [21] 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) [22] 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) (==) NV(0): Write-combining range (0xe0000000,0x4000000) (II) NV(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles 8x8 mono pattern filled rectangles Indirect CPU to Screen color expansion Solid Lines Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 32 256x256 slots 16 512x512 slots (==) NV(0): Backing store disabled (==) NV(0): Silken mouse enabled (**) Option "dpms" (**) NV(0): DPMS enabled (II) Initializing built-in extension MIT-SHM (II) Initializing built-in extension XInputExtension (II) Initializing built-in extension XTEST (II) Initializing built-in extension XKEYBOARD (II) Initializing built-in extension LBX (II) Initializing built-in extension XC-APPGROUP (II) Initializing built-in extension SECURITY (II) Initializing built-in extension XINERAMA (II) Initializing built-in extension XFree86-Bigfont (II) Initializing built-in extension RENDER (**) Option "Protocol" "Microsoft" (**) Mouse0: Protocol: "Microsoft" (**) Option "CorePointer" (**) Mouse0: Core Pointer (**) Option "Device" "/dev/fake" (EE) xf86OpenSerial: Cannot open device /dev/fake No such file or directory. (WW) Mouse0: cannot open input device (==) Mouse0: Buttons: 3 (**) Option "BaudRate" "1200" (**) Mouse0: BaudRate: 1200 (II) Keyboard "Keyboard0" handled by legacy driver (**) Option "AlwaysCore" (**) pen1: always reports core events (**) pen1 serial device is /dev/ttyS0 (**) pen1 is in absolute mode (**) pen1: resol x = 1270 (**) Option "BaudRate" "9600" (**) pen1: serial speed 9600 (**) Option "AlwaysCore" (**) eraser1: always reports core events (**) eraser1 serial device is /dev/ttyS0 (**) eraser1 is in absolute mode (**) eraser1: resol x = 1270 (**) Option "BaudRate" "9600" (**) eraser1: serial speed 9600 (**) Option "AlwaysCore" (**) cursor1: always reports core events (**) cursor1 serial device is /dev/ttyS0 (**) cursor1 is in relative mode (**) cursor1: resol x = 1270 (**) Option "BaudRate" "9600" (**) cursor1: serial speed 9600 (II) XINPUT: Adding extended input device "cursor1" (type: Wacom Cursor) (II) XINPUT: Adding extended input device "eraser1" (type: Wacom Eraser) (II) XINPUT: Adding extended input device "pen1" (type: Wacom Stylus) (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) (**) Option "Device" "/dev/ttyS0" (**) Option "StopBits" "1" (**) Option "DataBits" "8" (**) Option "Parity" "None" (**) Option "Vmin" "1" (**) Option "Vtime" "10" (**) Option "FlowControl" "Xoff" (==) Wacom tablet model : GD-0912-R00,V1.2-7 (==) Wacom using pressure threshold of -480 for button 1 (==) Wacom V tablet maximum X=30480 maximum Y=24060 X resolution=2540 Y resolution=2540 suppress=29 Tilt (==) Wacom tablet top X=0 top Y=0 bottom X=30480 bottom Y=24060 (==) Wacom invalid threshold -480. Reset to 341 (==) Wacom tablet top X=0 top Y=0 bottom X=30480 bottom Y=24060 (==) Wacom tablet top X=0 top Y=0 bottom X=30480 bottom Y=24060 (EE) xf86OpenSerial: Cannot open device /dev/fake No such file or directory. (WW) Mouse0: cannot open input device ===== -- I am a fool for Christ. Mostly I am a fool. -- __________________________________________________ Do You Yahoo!? Yahoo! Tax Center - online filing with TurboTax http://taxes.yahoo.com/