On 02/10/08 17:12, Theunis Potgieter wrote: > It appears to switch over to encrypted channel after a minute or > so.Only if I tried it a couple of times, and only then, once it > switched over it starts to record even if the timer was set a few > minutes earlier. Could it be that your CAM has problems handling FTA and CA channels at the same time? The CAM I use here has no problem with this. Klaus > On 2/10/08, Antti Hartikainen <ami+vdr@xxxxx> wrote: >> On Sun, Feb 10, 2008 at 10:46:25AM +0100, Klaus Schmidinger wrote: >>> On 02/10/08 09:16, Antti Hartikainen wrote: >>>> NumUsableSlots = 4 >>> You wrote that you are using only a single budget card. >>> How can a single budget card have 4 CI slots? >>> And all four of these apparently contain a CAM that is ready?! >> Well one slot for each card ;) System has totally 6 DVB-devices, but at the >> moment of testing only one (1) DVB-T tuner was available for VDR (3 other >> devices >> were DVB-S tuners, including FF-card too). >> >> NumUsableSlots is one less when error about channel not being available >> appears, so slot of this card disappears somewhere? _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
