On 02/09/08 11:22, Klaus Schmidinger wrote: > On 02/08/08 17:58, Klaus Schmidinger wrote: >> On 02/08/08 17:40, Antti Hartikainen wrote: >>> On Fri, Feb 08, 2008 at 04:12:04PM +0100, Klaus Schmidinger wrote: >>>>>> On 17/10/2007, *Arthur Konovalov* <kasjas@xxxxxx <mailto:kasjas@xxxxxx>> >>>>>> wrote: >>>>>> >>>>>> Hi all! >>>>>> >>>>>> Our local cable operator transmit on same frequency FTA and scrambled >>>>>> channels. >>>>>> During recording on FTA channel it is not possible to switch to any >>>>>> scrambled channel on the same frequency. >>>>>> "Channel not available!" message received. >>>>>> >>>>>> At the same time, when recording scrambled channel, switching to FTA or >>>>>> to other scrambled works. >>>>>> >>>>>> This behavior introduced with vdr-1.5.x versions (at least since 1.5.2, >>>>>> if I remember correctly). >>>>>> vdr-1.4.7 performs fine in same situation. >>>>>> >>>> - start VDR with only a single FF card with one CAM >>> What about with budget card? With budget cards it happened for me. >> I don't have a budget card with CAM in my system. > > For further testing I have now modified my cDevice::GetDevice(const cChannel *Channel, int Priority, bool LiveView) > function so that it never returns the primary device. So VDR always runs in > Transfer-Mode, and both the encrypted and the FTA channel will have to > be fetched from my second FF card with CAM (which would then act like > a budget card). > > Even in this constellation everything worked as expected, and I was able > to record the encrypted channel and switch live between the FTA and the > encrypted channel. I just read your original posting again, and there you described the problem the other way round. So I also tested recording the FTA channel and then switching to the encrypted channel, but this also works fine here. So I'm afraid I don't know what's causing this for you. Klaus _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
