Theunis Potgieter wrote: > I also have experienced this with DVB-S, however in my situation I > experienced it a bit different. > > I was switched to a radio channel which was FTA, a timer was set to > record a channel on the same transponder but is scrambled. The vdr info > bar showed it was recording. The directory was created but the file > 001.vdr was size 0. It also shows that I cannot tune to this channel . I > had to stop the timer/recording and switch to the scrambled channel and > enable the timer. But from there on I could jump back to the FTA radio > channel. Same happens every time I'm on a FTA channel and a timer starts > after I tuned to the channel. > > Theunis > > On 17/10/2007, *Arthur Konovalov* <kasjas@xxxxxx <mailto:kasjas@xxxxxx>> > wrote: > > Hi all! > > Our local cable operator transmit on same frequency FTA and scrambled > channels. > During recording on FTA channel it is not possible to switch to any > scrambled channel on the same frequency. > "Channel not available!" message received. > > At the same time, when recording scrambled channel, switching to FTA or > to other scrambled works. > > This behavior introduced with vdr-1.5.x versions (at least since 1.5.2, > if I remember correctly). > vdr-1.4.7 performs fine in same situation. > Klaus, what You can tell about fixing this problem? This is main restriction to switch to vdr-1.5 line. Regards, AK _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
