Hi, Maxime Laplante schrieb: > I searched the mailing list and found that there may be a patch but this > is not for vdr 1.4.0 > check this: > http://212.227.166.180/pipermail/vdr/2005-December/006841.html This patch was already integrated into VDR 1.3.x with some small modifications, so VDR 1.4.0 works like that: when "optimized" tuning to a channel doesn't get a lock within 9 seconds, a "non optimized" tuning operation is repeated every 9 seconds until a lock succeeds. "optimized tuning" means: when you switch from one channel to another channel on the same polarization, there is no need to send the DiSEqC commands. Only the tuner needs to tune to a different frequency. So "non optimized tuning" means, that the DiSEqC commands are sent although there is no need to. This fixed tuning issues where the DiSEqC message got distorted on the way to the multiswitch/LNB with the result that VDR never successfully tuned in such a case. Bye. -- Dipl.-Inform. (FH) Reinhard Nissl mailto:rnissl@xxxxxx _______________________________________________ vdr mailing list vdr@xxxxxxxxxxx http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
