VDR doesn't always switch channel correctly

["Maxime Laplante" <maxime@xxxxxxxxxxxxxxxxxx>]

Hi guys,

 

I'm running VDR 1.4.0 on my CaptiveWorks CW-3000HD FTA receiver.

 

I have a DishPro Twin LNB to receive both Nimiq 1 (91.0W) and Nimiq 2 (82.0W)

There is also a Dish Pro DP34 switch between the receiver and lnb.

 

 

Everything is working good except that sometimes VDR doesn't tune a channel correctly.

I just get a black screen.

 

Usually when I switch from a channel on one satellite to a channel on another satellite.

 

I searched the mailing list and found that there may be a patch but this is not for vdr 1.4.0

check this:

http://212.227.166.180/pipermail/vdr/2005-December/006841.html

 

 

My current diseqc.conf is:

 

# DiseqC Configuration

 

# Port 0 Galaxy 11 & Nimiq 1,3
S91.0W 99999 V 11250 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
S91.0W 99999 H 14350 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
S91.0W 99999 R 11250 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20
S91.0W 99999 L 14350 t V W15 [E0 10 38 F2] W20 [E0 10 38 F2] W20

 

# Port 1 Nimiq 2
S82.0W 99999 V 11250 t V W15 [E0 10 38 F6] W20 [E0 10 38 F6] W20
S82.0W 99999 H 14350 t V W15 [E0 10 38 F6] W20 [E0 10 38 F6] W20
S82.0W 99999 R 11250 t V W15 [E0 10 38 F6] W20 [E0 10 38 F6] W20
S82.0W 99999 L 14350 t V W15 [E0 10 38 F6] W20 [E0 10 38 F6] W20

 

 

Thanks,

Maxime

_______________________________________________
vdr mailing list
vdr@xxxxxxxxxxx
http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr