Hello Barbier, On 10.06.21 15:49, Barbier, Renaud wrote: > I received a NXP LS1046A-RDB It doesn't reboot cleanly with a USB serial adapter attached! Jfyi, gave me a scare first time, when I thought I broke something ^^. > > I built barebox for the LS1046A and got the image barebox-ls1046ardb-qspi.image. > I programmed the image in the alternative SPI bank as per NXP instructions: > => tftp $load_addr > => sf erase 0 +$filesize && sf write $load_addr 0 $filesize > > Barebox does not boot. > > I did notice that u-boot is at address 0x40100000 while the RCW is at 0x40000000. > My understanding is that barebox is one image and shall be programmed at offset 0 of the SPI (0x40000000) Can't comment on that. Sascha did the integration. > At present I cannot connect my I.C.E. due a pin stuck in my MIPI connector. > > Any return on experience is welcome. Can comment on that: Last time I did this, I wrote some documentation: https://www.barebox.org/doc/latest/boards/layerscape.html There I flashed barebox from another barebox booted from SD-Card. I'd assume that should still work. I can't recall how the CPLD needed to be tickled, but it would be helpful to know whether doing it like described in the documentation doesn't work for you. Cheers, Ahmad > > Cheers, > Renaud > > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
