On 10.06.21 18:23, Barbier, Renaud wrote: > Could the barebox image be started from memory with a "go" command? > What would be the entry point? Here's the barebox code that implements booting other barebox images: https://git.pengutronix.de/cgit/barebox/tree/arch/arm/mach-layerscape/pblimage.c Apparently entry point is at offset 128K. Keep in mind that U-Boot go (at least on ARM32) does not do cache maintenance or turn off the MMU, so funny effects may be expected. Cheers, Ahamd > > -----Original Message----- > From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> > Sent: 10 June 2021 17:14 > To: Barbier, Renaud <renaud.barbier@xxxxxxxxx> > Subject: Re: NXP Layerscape > > > > [**EXTERNAL SOURCE**]:Please verify the source before clicking link or opening attachment. > > Hi Renaud, > > (please keep mailing list CC'd) > > On 10.06.21 16:53, Barbier, Renaud wrote: >> I am not using a USB serial adapter. Currently I have a RJ-45 to RS232 to my laptop. >> >> Should not BOOTLOCPTR be set I the PBI. I see 0x40100000 for U-boot and 0x10000000 for barebox. Unless it does not apply for PPA boot flow. > > I don't know about the specifics of the first stage boot on the Layerscape, I just wanted to point you at the docs and ask if the steps I had documented there work for you or not. > > Cheers, > Ahmad > >> >> -----Original Message----- >> From: Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> >> Sent: 10 June 2021 15:09 >> To: Barbier, Renaud <renaud.barbier@xxxxxxxxx>; Barebox List >> <barebox@xxxxxxxxxxxxxxxxxxx> >> Subject: Re: NXP Layerscape >> >> >> >> [**EXTERNAL SOURCE**]:Please verify the source before clicking link or opening attachment. >> >> Hello Barbier, >> >> On 10.06.21 15:49, Barbier, Renaud wrote: >>> I received a NXP LS1046A-RDB >> >> It doesn't reboot cleanly with a USB serial adapter attached! >> Jfyi, gave me a scare first time, when I thought I broke something ^^. >> >>> >>> I built barebox for the LS1046A and got the image barebox-ls1046ardb-qspi.image. >>> I programmed the image in the alternative SPI bank as per NXP instructions: >>> => tftp $load_addr >>> => sf erase 0 +$filesize && sf write $load_addr 0 $filesize >>> >>> Barebox does not boot. >>> >>> I did notice that u-boot is at address 0x40100000 while the RCW is at 0x40000000. >>> My understanding is that barebox is one image and shall be programmed >>> at offset 0 of the SPI (0x40000000) >> >> Can't comment on that. Sascha did the integration. >> >>> At present I cannot connect my I.C.E. due a pin stuck in my MIPI connector. >>> >>> Any return on experience is welcome. >> >> Can comment on that: Last time I did this, I wrote some documentation: >> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww. >> barebox.org%2Fdoc%2Flatest%2Fboards%2Flayerscape.html&data=04%7C01 >> %7Crenaud.barbier%40abaco.com%7C0e00e06c3236419cae1108d92c2acefe%7Ce6f >> 27451899d4d0db8fa88baafa551a7%7C0%7C0%7C637589384654589155%7CUnknown%7 >> CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXV >> CI6Mn0%3D%7C1000&sdata=OUk8SFTmrlH0U%2F8aiXZonQHxLplyEjlMtc7Y5JHx% >> 2BUk%3D&reserved=0 >> >> There I flashed barebox from another barebox booted from SD-Card. >> I'd assume that should still work. I can't recall how the CPLD needed to be tickled, but it would be helpful to know whether doing it like described in the documentation doesn't work for you. >> >> Cheers, >> Ahmad >> >>> >>> Cheers, >>> Renaud >>> >>> >>> _______________________________________________ >>> barebox mailing list >>> barebox@xxxxxxxxxxxxxxxxxxx >>> https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Flist >>> s >>> .infradead.org%2Fmailman%2Flistinfo%2Fbarebox&data=04%7C01%7Crena >>> u >>> d.barbier%40abaco.com%7Cdf668f5e5f2d497d54cb08d92c194c3e%7Ce6f2745189 >>> 9 >>> d4d0db8fa88baafa551a7%7C0%7C0%7C637589309423989184%7CUnknown%7CTWFpbG >>> Z >>> sb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0% >>> 3 >>> D%7C1000&sdata=ORpVZlyPk2o7%2FyVYOkJPeAWNnq2%2FkxKauxep7gvDJ%2Bo% >>> 3 >>> D&reserved=0 >>> >> >> -- >> Pengutronix e.K. | | >> Steuerwalder Str. 21 | https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pengutronix.de%2F&data=04%7C01%7Crenaud.barbier%40abaco.com%7C0e00e06c3236419cae1108d92c2acefe%7Ce6f27451899d4d0db8fa88baafa551a7%7C0%7C0%7C637589384654589155%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Ru7cLRTSk3qfVNgAjscSXxOw4hj2j3dHbFSqsTL8sic%3D&reserved=0 | >> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | >> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | >> > > -- > Pengutronix e.K. | | > Steuerwalder Str. 21 | https://nam11.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.pengutronix.de%2F&data=04%7C01%7Crenaud.barbier%40abaco.com%7C0e00e06c3236419cae1108d92c2acefe%7Ce6f27451899d4d0db8fa88baafa551a7%7C0%7C0%7C637589384654589155%7CUnknown%7CTWFpbGZsb3d8eyJWIjoiMC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C1000&sdata=Ru7cLRTSk3qfVNgAjscSXxOw4hj2j3dHbFSqsTL8sic%3D&reserved=0 | > 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox