This settings taken from original DIGI U-boot source code.
Signed-off-by: Alexander Shiyan <shc_work@xxxxxxx>
---
arch/arm/boards/ccxmx51/ccxmx51.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boards/ccxmx51/ccxmx51.c b/arch/arm/boards/ccxmx51/ccxmx51.c
index 9610e41..b760ca8 100644
--- a/arch/arm/boards/ccxmx51/ccxmx51.c
+++ b/arch/arm/boards/ccxmx51/ccxmx51.c
@@ -256,13 +256,13 @@ static int ccxmx51_power_init(void)
val = 0x238033;
mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_CHARGE, val);
- /* Set core voltage (SW1) to 1.1V */
- mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SW_0, &val);
- val &= ~0x00001f;
- val |= 0x000014;
- mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_SW_0, val);
-
if (imx_silicon_revision() < IMX_CHIP_REV_3_0) {
+ /* Set core voltage (SW1) to 1.1V */
+ mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SW_0, &val);
+ val &= ~0x00001f;
+ val |= 0x000014;
+ mc13xxx_reg_write(mc13xxx_dev, MC13892_REG_SW_0, val);
+
/* Setup VCC (SW2) to 1.25 */
mc13xxx_reg_read(mc13xxx_dev, MC13892_REG_SW_1, &val);
val &= ~0x00001f;
--
1.8.1.5
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
