On Fri, 2013-05-10 at 14:53 +0200, Eric Bénard wrote: > > > My boot sources are nand-flash (thats where u-boot is at the moment) > > > (and SD-card for testing). > > > > > > I tried to flash zbarebox.bin to nand-flash. It started but with error > > > nand: NAND type unknown, ec,f1 > > > nand: No NAND device found (-19)! > > > > Hm, strange. This should be a Samsung 128MiB NAND flash. The id is in > > the database. I currently have no good idea why this isa unknown. > > > may you please try with his patch : > http://lists.infradead.org/pipermail/barebox/2013-May/014470.html > and tell if that solves this NAND flash issue. Successfully tested your patch on an omap3-board: NAND detection works again. Without the patch I get the same kind of error as above. > It seems my tests for 4c2bdc8728016b3412523e3264651651fe752860 were > wrong as all the board I'm using for my tests have ONFI flashes ... > so I'll fit one with a non ONFI flash for the next time. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
