Hi Patrick, Le Fri, 10 May 2013 12:53:50 +0200, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> a écrit : > On Fri, May 10, 2013 at 09:20:50AM +0000, Dr. Patrick Langfeld wrote: > > Thanks Sascha, > > building barebox results in two .bin files: barebox.bin and > > zbarebox.bin. > > Is zbarebox.bin a compressed version of barebox.bin? > > Which one should I use for flashing the tx53 nand-flash? > > If it exists then zbarebox.bin please. There is a convenience link > (barebox-flash-image) which always points to the correct binary. > > > > > My boot sources are nand-flash (thats where u-boot is at the moment) > > (and SD-card for testing). > > > > I tried to flash zbarebox.bin to nand-flash. It started but with error > > nand: NAND type unknown, ec,f1 > > nand: No NAND device found (-19)! > > Hm, strange. This should be a Samsung 128MiB NAND flash. The id is in > the database. I currently have no good idea why this isa unknown. > may you please try with his patch : http://lists.infradead.org/pipermail/barebox/2013-May/014470.html and tell if that solves this NAND flash issue. It seems my tests for 4c2bdc8728016b3412523e3264651651fe752860 were wrong as all the board I'm using for my tests have ONFI flashes ... so I'll fit one with a non ONFI flash for the next time. Eric _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
