On Fri, May 10, 2013 at 09:20:50AM +0000, Dr. Patrick Langfeld wrote: > Thanks Sascha, > building barebox results in two .bin files: barebox.bin and > zbarebox.bin. > Is zbarebox.bin a compressed version of barebox.bin? > Which one should I use for flashing the tx53 nand-flash? If it exists then zbarebox.bin please. There is a convenience link (barebox-flash-image) which always points to the correct binary. > > My boot sources are nand-flash (thats where u-boot is at the moment) > (and SD-card for testing). > > I tried to flash zbarebox.bin to nand-flash. It started but with error > nand: NAND type unknown, ec,f1 > nand: No NAND device found (-19)! Hm, strange. This should be a Samsung 128MiB NAND flash. The id is in the database. I currently have no good idea why this isa unknown. > imx_nand imx_nand0: probe failed: No such device or address > malloc space: 0x85f00000 -> 0x87efffff (size 32 MiB) > Using environment in NAND > Open /dev/env0 No such file or directory > .. For testing I would recommend the SD card. You can simply write the binary to the card: cat barebox-flash-image > /dev/sdx > > Does barebox already support the FirmwareConfigurationBlock? I heard > from Mathias Fend that he manually had to add a FCB blob before the > barebox binary when writing barebox to flash in an older barebox > version. The FCB is not part of the image. However, when you start from SD card you should be able to use barebox_update to flash to the nand, given that it works of course... Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
