On Wed, Aug 29, 2012 at 03:13:53PM +0200, Norbert Roos wrote: > Hello, > > On 08/29/2012 08:29 AM, Sascha Hauer wrote: > > >TEXT_BASE is the address barebox will be linked at. Normally this is > >somewhere near the end of SDRAM, but could be also in some internal SRAM > >in special cases. If you use the pcm049_defconfig it should be > >configured correctly already. > > Ok, thanks, i didn't know there are those configs. > > Now it's building and produces some files. Is there somewhere an > explanation what the files are and what i should do with them in the > next step? In my case with an OMAP based board? I would have > expected at least the "MLO" file, but there are just the barebox > files.. For OMAP boards there are two defconfigs, one for the MLO (or xloader) and one regular barebox binary. See http://wiki.barebox.org/doku.php?id=boards:omap (I just saw it's a bit outdated, because the file generated for the xloader is nowadays MLO, not barebox.bin.ift. So you have to: make pcm049_xload_defconfig make cp MLO /mnt/MLO make pcm049_defconfig cp barebox.bin /mnt/barebox.bin > > I don't intend to get personal teaching lessons here, but the whole > documentation is somehow - suboptimal. I am writing down the steps > i'm doing, so in return i could add a howto or tutorial or something > like that. That would be great. I could give you an account for the wiki if you have something to improve there. Thanks Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
