On Wed, Nov 09, 2011 at 12:29:19PM +0100, franck.jullien@xxxxxxxxx wrote: > From: Franck Jullien <franck.jullien@xxxxxxxxx> > > This is the second try for fixing the display of the mount command. > I'm doing some test with a sd card over spi (path to come). > This is what I get: > > barebox@generic:/ devinfo > devices: > `---- altera_serial0 > `---- cs0 > `---- ramfs0 > `---- devfs0 > `---- mem0 > `---- 0x00000000-0x00001c8c: /dev/defaultenv > `---- mem1 > `---- 0x00000000-0xfffffffe: /dev/mem > `---- mem2 > `---- 0x00000000-0x007fffff: /dev/ram0 > `---- altera_spi0 > `---- m25p0 > `---- altera_spi1 > `---- spi_mci0 > `---- mci0 > `---- disk0 > `---- 0x00000000-0x00e37fff: /dev/disk0 > `---- 0x00007200-0x00e37fff: /dev/disk0.0 > `---- fat0 > > barebox@generic:/ mount > none on / type ramfs > none on /dev type devfs > disk0 on /mnt type fat > > Seems good to me.... > > Franck Jullien (2): > ata: Add dev ref to blockdevice during probe > [RFC v2] mount: Fix the printing of device name > > commands/mount.c | 2 +- > drivers/ata/disk_drive.c | 1 + > fs/fs.c | 7 +++++++ > 3 files changed, 9 insertions(+), 1 deletions(-) Looks good, applied. Thanks Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
