From: Franck Jullien <franck.jullien@xxxxxxxxx>
This is the second try for fixing the display of the mount command.
I'm doing some test with a sd card over spi (path to come).
This is what I get:
barebox@generic:/ devinfo
devices:
`---- altera_serial0
`---- cs0
`---- ramfs0
`---- devfs0
`---- mem0
`---- 0x00000000-0x00001c8c: /dev/defaultenv
`---- mem1
`---- 0x00000000-0xfffffffe: /dev/mem
`---- mem2
`---- 0x00000000-0x007fffff: /dev/ram0
`---- altera_spi0
`---- m25p0
`---- altera_spi1
`---- spi_mci0
`---- mci0
`---- disk0
`---- 0x00000000-0x00e37fff: /dev/disk0
`---- 0x00007200-0x00e37fff: /dev/disk0.0
`---- fat0
barebox@generic:/ mount
none on / type ramfs
none on /dev type devfs
disk0 on /mnt type fat
Seems good to me....
Franck Jullien (2):
ata: Add dev ref to blockdevice during probe
[RFC v2] mount: Fix the printing of device name
commands/mount.c | 2 +-
drivers/ata/disk_drive.c | 1 +
fs/fs.c | 7 +++++++
3 files changed, 9 insertions(+), 1 deletions(-)
--
1.7.7
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
