> -----Original Message----- > From: barebox-bounces@xxxxxxxxxxxxxxxxxxx > [mailto:barebox-bounces@xxxxxxxxxxxxxxxxxxx] On Behalf Of > Orjan Friberg > Sent: Thursday, December 02, 2010 10:10 PM > To: Belisko Marek > Cc: barebox@xxxxxxxxxxxxxxxxxxx > Subject: Re: Barebox on a 3730 > > On 2010-12-02 16:13, Belisko Marek wrote: > > Not have omap3530 or other but have same issue with > different board type. > > Problem was with clock setup for serial. Just an idea check > if clock is correct > > according data sheet. Maybe 37xx differs from 35xx ;) > > Clocking looks like it should be the same but just out of curiosity, > what issue did you have with the clock setup? (What was bad, > how did it > manifest itself.) > > I haven't found any 3530 vs. 3730 diffs in the uart configuration in > u-boot or linux (though there is a silicon errata fix in the latest > linux-omap-2.6 kernel related to not reading from an empty FIFO). > Look for the AM37x TRM here: http://focus.ti.com/docs/prod/folders/print/am3715.html > But then again, they could potentially both be relying on the first > stage bootloader setting things upp correctly (and then not > touching it). > > > Thanks, > Orjan > > -- > Orjan Friberg > FlatFrog Laboratories AB > > _______________________________________________ > barebox mailing list > barebox@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/barebox > _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
