Wolfgang Gill wrote:
Try disconnecting the second CD-ROM drive and see whether it runs better
without it. As it may be conflicting with the CD-RW.
I'm running the same type of MSI board and it working flawlessly with that
kernel. But then I only have one CD-RW connected to the secondary IDE
channel.
Cheers,
Wolf
-----Original Message-----
From: steve [mailto:ssmith@xxxxxxxxxxxxxx]
Sent: Friday, 30 May 2003 12:30 PM
To: shrike-list@xxxxxxxxxx
Subject: ide-scsi problems
When I try to rip a track from an audio CD using cdparanoia the kernel
crashes with the caps lock and scroll lock led blinking.
Using Linux 2.4.20-13.9
Using a Memorex 52MAXX 2452AJ CDRW
Using MSI KT266A mainboard
If I use the standard CD the kernel does not miss the interrupt. CD-ROM
48X/AKU
Both CD's are ide-scsi.
What kernel version works with my configuration?
Should I go back in kernel versions?
Here is a snip of the error messages from dmesg;
May 25 08:58:45 localhost kernel: hdc: lost interrupt
May 25 08:58:45 localhost kernel: ide-scsi: The scsi wants to send us
more data than expected - discarding data
May 25 08:58:45 localhost kernel: ide-scsi: [[ be 0 0 0 0 7c 0 0 d f8 0 0 ]
May 25 08:58:45 localhost kernel: ] May 25 08:58:45 localhost kernel:
ide-scsi: expected 30576 got 32928
limit 30576
May 25 08:58:45 localhost kernel: ide-scsi: transferred 9408 of 11760 bytes
May 25 08:59:45 localhost kernel: scsi : aborting command due to timeout
: pid 1113, scsi0, channel 0, id 0, lun 0 UNKNOWN(0xbe) 00 00 00 00 fc
00 00 0d f8 00 00
May 25 08:59:45 localhost kernel: hdc: lost interrupt
May 25 08:59:45 localhost kernel: ide-scsi: The scsi wants to send us
more data than expected - discarding data
May 25 08:59:45 localhost kernel: ide-scsi: [[ be 0 0 0 0 fc 0 0 d f8 0 0 ]
######################################################################
Attention:
This e-mail message is privileged and confidential. If you are not the
intended recipient please delete the message and notify the sender.
Any views or opinions presented are solely those of the author.
This e-mail has been scanned and cleared by MailMarshal
www.marshalsoftware.com
######################################################################
I removed 48X/AKU CD and made the Memorex 52MAXX 2452AJ CDRW the master
on secondary IDE. I still have the same problem missing interrupts and
buffer over flow.
Regards
Steve
