So which MSI board are you using exactly?? I've run this version of RH on both the K7T266 and the K7T266Pro RU, and both CD-RW's are working perfectly. And I'm now running MSI's KT4 Ultra and it's still working ok. Sure there are no other problems with the system, that might be causing your problem??? Wolf -----Original Message----- From: steve [mailto:ssmith@xxxxxxxxxxxxxx] Sent: Friday, 30 May 2003 2:08 PM To: shrike-list@xxxxxxxxxx Subject: Re: ide-scsi problems Wolfgang Gill wrote: >Try disconnecting the second CD-ROM drive and see whether it runs >better without it. As it may be conflicting with the CD-RW. > >I'm running the same type of MSI board and it working flawlessly with >that kernel. But then I only have one CD-RW connected to the secondary >IDE channel. > >Cheers, > >Wolf > >-----Original Message----- >From: steve [mailto:ssmith@xxxxxxxxxxxxxx] >Sent: Friday, 30 May 2003 12:30 PM >To: shrike-list@xxxxxxxxxx >Subject: ide-scsi problems > > >When I try to rip a track from an audio CD using cdparanoia the kernel >crashes with the caps lock and scroll lock led blinking. > >Using Linux 2.4.20-13.9 >Using a Memorex 52MAXX 2452AJ CDRW >Using MSI KT266A mainboard > >If I use the standard CD the kernel does not miss the interrupt. CD-ROM >48X/AKU > >Both CD's are ide-scsi. > >What kernel version works with my configuration? >Should I go back in kernel versions? > >Here is a snip of the error messages from dmesg; > >May 25 08:58:45 localhost kernel: hdc: lost interrupt >May 25 08:58:45 localhost kernel: ide-scsi: The scsi wants to send us >more data than expected - discarding data >May 25 08:58:45 localhost kernel: ide-scsi: [[ be 0 0 0 0 7c 0 0 d f8 0 0 ] >May 25 08:58:45 localhost kernel: ] May 25 08:58:45 localhost kernel: >ide-scsi: expected 30576 got 32928 >limit 30576 >May 25 08:58:45 localhost kernel: ide-scsi: transferred 9408 of 11760 bytes >May 25 08:59:45 localhost kernel: scsi : aborting command due to timeout >: pid 1113, scsi0, channel 0, id 0, lun 0 UNKNOWN(0xbe) 00 00 00 00 fc >00 00 0d f8 00 00 >May 25 08:59:45 localhost kernel: hdc: lost interrupt >May 25 08:59:45 localhost kernel: ide-scsi: The scsi wants to send us >more data than expected - discarding data >May 25 08:59:45 localhost kernel: ide-scsi: [[ be 0 0 0 0 fc 0 0 d f8 0 0 ] > > I removed 48X/AKU CD and made the Memorex 52MAXX 2452AJ CDRW the master on secondary IDE. I still have the same problem missing interrupts and buffer over flow. Regards Steve ###################################################################### Attention: This e-mail message is privileged and confidential. If you are not the intended recipient please delete the message and notify the sender. Any views or opinions presented are solely those of the author. This e-mail has been scanned and cleared by MailMarshal www.marshalsoftware.com ######################################################################
