Here you go: ----- Beginning ----- T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 6 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.04 S: Manufacturer=Linux 2.4.20-18.9 ehci-hcd S: Product=PCI device 1039:7002 (Silicon Integrated Systems [SiS]) S: SerialNumber=00:03.3 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=e084e000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=e084c000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=e084a000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=051d ProdID=0002 Rev= 0.06 S: Manufacturer=American Power Conversion S: Product=Smart-UPS 1000 XL FW:631.3.D USB FW:1.5 S: SerialNumber=AS0315130454 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 30mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 6 Ivl=100ms ----- End ----- Looks like the last grouping shows the unit correctly. I take it this is a positive thing? -----Original Message----- From: shrike-list-admin@xxxxxxxxxx [mailto:shrike-list-admin@xxxxxxxxxx] On Behalf Of Markku Kolkka Sent: Friday, June 20, 2003 1:07 PM To: shrike-list@xxxxxxxxxx Subject: Re: APC SmartUPS 1000XL VA + Red Hat 9 (Non-HTML repost) Viestissä Perjantai 20. Kesäkuuta 2003 15:32, Michael J. McGillick kirjoitti: > Jun 20 07:36:57 mars kernel: usb.c: USB device 2 (vend/prod 0x51d/0x2) is > not claimed by any active driver. > > ------- Messages File Ends Here ------- > > I noted the very last line. Is it possible that line refers to my UPS, and > the system doesn't understand it? Yes, vendor code 0x51d is APC according to http://www.linux-usb.org/ > Additional suggestions? Send a copy of your /proc/bus/usb/devices -- Markku Kolkka markku.kolkka@xxxxxxxxxxxx -- Shrike-list mailing list Shrike-list@xxxxxxxxxx https://www.redhat.com/mailman/listinfo/shrike-list
