I _think_ I know my hardware: no RAID controller Adaptec chip set the configuration is invoked at POST The BIOS sees the three SCSI at id's 0, 4 and 6. The Red Hat installer does not see all the drives and I don't think it sees the two cpu's either. Does Red Hat 8.0 Professional support multiple cpu's and multiple SCSI hard drives not configured in RAID? steve On Fri, 2003-02-07 at 21:01, Craig White wrote: > On Fri, 2003-02-07 at 20:13, Steve Strong wrote: > > I work for a school and we've been given an HP Kayak server: > > > > 2 500 mhz cpu's > > 3 9 gig SCSI hard drives > > > > I can see the cpu's and hard drives in the BIOS, but the installer only > > sees one hard drive and I think just one cpu. The SCSI driver is loaded > > without error messages during the install. > > > > Does Red Hat 8.0 Professional support multiple cpu's and SCSI hard > > drives? If so, what am I doing wrong and if not, what a bummer! > ----- > Is there a raid controller on the system? If so, it's possible that the > raid configuration created only 1 system drive which is all that would > be seen by software... > > I would presume that all of the SCSI controllers would show themselves > and the methods to invoke the configuration during POST - Many of these > systems would have perhaps an Adaptec 78xxx compatible chipset embedded > on the motherboard along with a DAC 960 Raid controller in an ISA or PCI > slot and the hard drives would be on the Raid controller. > > Always a good thing to know your hardware first... > > Craig > > > > -- > Psyche-list mailing list > Psyche-list@redhat.com > https://listman.redhat.com/mailman/listinfo/psyche-list > > -- Steve Strong Computer Science Teacher Washington High School 2205 Forest Dr. SE Cedar Rapids, IA 52403 mailto: sstrong@crwash.org website: http://crwash.org telephone: 319-398-2161 -- Psyche-list mailing list Psyche-list@redhat.com https://listman.redhat.com/mailman/listinfo/psyche-list
